Search Results

Search Results for "bar stock segregation"

Search Again

Organization / Society AIME (200) AUSIMM (18) DFI (3) NIOSH (38) RMCMI (5) SAIMM (3) SME (33) All News Jobs Blogs Research

Showing: 1 to 10 of 300 matches for "bar stock segregation"  Page   1   2   3   4   5   6   7   8   9  next TITLE Continuously Cast Zinc Alloy Bar Stock - Applications and Benefits  SUMMARY ... addition to high productivity, this leads to some metallurgical benefits including less segregation, fmer microstructures ... CONTINUOUSLY CAST ZINC ALLOY BAR STOCK ... PUBLISHED 1993 TITLE Institute of Metals Division - On the Nature of Embrittlement Occurring While Tempering a Ni-Cr Alloy Steel (Discussion 1310)  SUMMARY ... explain embrittlement; on the other hand, segregation of solute atoms to prior ... used in this investigation was commercial AISI 3140 steel bar stock, received as ... AUTHOR Bhat, G. ; Libsch, J.F. PUBLISHED 1958 TITLE Institute of Metals Division - Effect of O2 and H2 on the Mechanical Properties of Tantalum and Columbium at Low Temperatures  SUMMARY ... concen- trations are necessary to develop a comparable de- gree of grain boundary segregation and to produce ... diam electron beam melted wrought bar stock, in a ... AUTHOR Imgram, A. G. ; Bartlett, E. S. ; Ogden, H. R. PUBLISHED 1963 TITLE Institute of Metals Division - Evaluation of Properties Obtained from an Air-Induction and Vacuum-Arc Melted High-Temperature Alloy  SUMMARY ... dif- ferent type forgings. Laboratory alloy specimens were obtained from the optimum conditions of a longitudinal specimen from heavily reduced bar stock. ... AUTHOR Bulina, J. ; Brown, J. T. PUBLISHED 1960 TITLE Part IX – September 1968 - Communications - Shock- Wave-Induced Reverse Martensitic Transformation in Fe-30 pct Ni  SUMMARY ... Ni nominally 12.7 mm thick and 64 mm in diam were cut from bar stock. ... analysis was performed to determine if there was sufficient nickel segregation to account ... AUTHOR Rohde, R. W. ; Holland, J. R. ; Graham, R. A. PUBLISHED 1969 TITLE Technical Papers and Discussions - Magnesium and Magnesium Alloys - Solubility of Iron in Liquid Magnesium (Metals Tech., Jan. 1948, TP 2309)  SUMMARY ... for the formation of primary mag- nesium crystals which can be separated by segregation. ... They were made by boring a hole in solid bar stock and each crucible ... AUTHOR Mitchell, D. W. PUBLISHED 1949 TITLE Solubility Of Iron In Liquid Magnesium  SUMMARY ... time. Super- segregation. Also ... 0.840 made by boring a hole in solid bar stock and each crucible was fitted with a tight fitting lid. Fig ... AUTHOR Mitchell, David W. PUBLISHED 1948 TITLE Institute of Metals Division - The Surface Tension of Liquid Chromium and Manganese  SUMMARY ... of the zone melter both as to substitutional solute-segregation behavior and the ... and zirconium were obtained by cold swaging and centerless grinding bar stock. ... AUTHOR Allen, Benjamin C. PUBLISHED 1964 TITLE Part X - The 1967 Howe Memorial Lecture – Iron and Steel Division - Strength and Ductility of 7000-Series Wrought-Aluminum Alloys as Affected by Ingot Structure  SUMMARY ... The electron-micro- probe study also showed the preferential segregation of solutes in the ... plates homogenized 24 hr at 900°F were forged to 3 -in.-diam bar. ... AUTHOR Antes, H. W. ; Lipson, S. ; Rosenthal, H. PUBLISHED 1968 TITLE Institute of Metals Division - Intragranular Precipitation of Intermetallic Compounds in Complex Austenitic Alloys  SUMMARY ... bar stock. ... boron addition to Incoloy-901 produces a refractory boride phase rich in molybdenum, titanium, and chromium, and a segregation, at moderate aging ... AUTHOR Beattie, H. J., Jr. ; Hagel, W. C. PUBLISHED 1962 Showing: 1 to 10 of 300 matches for "bar stock segregation"  Page   1   2   3   4   5   6   7   8   9  next Search Again