Search Results

Search Results for "machining electrode"

Search Again

Organization / Society AIME (75) AUSIMM (7) NIOSH (67) RMCMI (2) SAIMM (10) SME (10) TMS (9) USBM (1) All News Jobs Blogs Research

Showing: 1 to 10 of 181 matches for "machining electrode"  Page   1   2   3   4   5   6   7   8   9  next TITLE Radiation Hazards Encountered In Arc Melting Thorium ? Summary  SUMMARY ... to the removal of the shrink hole, the sidewall and bottom of the are sometimes or E u sf porous and need valve machining. I<t--Il----- Con su mabIe electrode ... AUTHOR Lowery, R. R. PUBLISHED 1962 TITLE Processing The Ni- And Cr-Bearing Oxidized Scarfing Granulates With Liquid Cast Iron  SUMMARY ... and carbides. The last ones come from an iron electrode that is used during the electric discharge machining. However a content ... AUTHOR Sokolov, Vladyslav M. PUBLISHED 2006 TITLE PEM Fuel Cell Bipolar Plate - Material Selection, Design and Integration  SUMMARY ... Also no iron is detected in membrane electrode assembly (MEA) by EDAX analysis ... Graphite plates are good performers, but the machining process required to make ... AUTHOR Kurnar, Atul PUBLISHED 2002 TITLE Defect Analysis and Processing Problems in Anodic Aluminum Coatings  SUMMARY ... varying composition depending on the lubricant used in extrusion, machining and polishing ... with aluminum to form aluminum sulfate, and an electrode potential is ... AUTHOR Tiner, Nathan A. PUBLISHED 1992 TITLE Ultrasonic Inspection Of Arc-Cast Zirconium And Its Alloys ? Summary  SUMMARY ... con- ditioned by facing the ends and lightly machining the sidewalls. A series of conditioned ingots is joined to form a second consumable electrode. ... AUTHOR Wood, F. W. PUBLISHED 1955 TITLE Review Of Metallurgical Technology  SUMMARY ... has been employed when melting and cast- ing was difficult or impossible, when phase relationships needed to be sidestepped, or when machining costs could be ... AUTHOR Higbie, Kenneth B. PUBLISHED 1964 TITLE Electrolytic Heat-Treatment Method For Producing Stainless Steel Coatings And Electroforms - Objective  SUMMARY ... As a result, the loss of valuable metals associ- ated with machining finished products ... increased as the per- centage of iron in the electrode- posited matrix ... PUBLISHED 1986 TITLE Anodic Processes During Betts Refining in a Small-Scale Electrore fining Cell.  SUMMARY ... The deformed layer produced by the cutting and machining operations was removed by polishing using 600 grit ... These were screwed-in to the top of the electrode. ... AUTHOR Gonzalez-Dominguez, J.A. PUBLISHED 1994 TITLE The Fabrication Of Arc-Melted Ingots Of Titanium And Titanium-Manganese Alloys Into Plate ? Summary  SUMMARY ... thoriated- tungsten electrode. This left a very porous, incompletely melted surfaCe on the ingot wall, which resulted in a greater loss in machining to provide ... AUTHOR Huber, R. W. PUBLISHED 1955 TITLE Design of an Experimental Electric Arc Furnace  SUMMARY ... in height) for the copper block was screwed into place underneath the arcing electrode. This allowed easy removal of the copper insert for machining to ensure ... AUTHOR Hartman, Alan D. PUBLISHED 2010 Showing: 1 to 10 of 181 matches for "machining electrode"  Page   1   2   3   4   5   6   7   8   9  next Search Again