Search Results

Search Results for "rebar tensile strength"

Search Again

Organization / Society AIME (8) AUSIMM (9) DFI (29) NIOSH (32) SAIMM (16) SME (123) TMS (1) All News Jobs Blogs Research

Showing: 1 to 10 of 218 matches for "rebar tensile strength"  Page   1   2   3   4   5   6   7   8   9  next TITLE New Developments In Headed Rebar Ground Support  SUMMARY ... In the case of headed rock rebar bolts, ASTM 432-95 applies ... the Wedge Tension Testing of Full Size Product paragraph of Test Methods F 606 for tensile strength. ... AUTHOR Walker, Roland C. PUBLISHED 2009 TITLE Deriving Input Parameters for Numerical Modeling of Fully Resin Grouted Rock Bolts  SUMMARY ... Rebar diameter 25 mm Rebar length / grouted length 2500 mm / 2400 mm Rebar tensile strength 700 MPa 320 kN load Rebar yield strength 450 MPa 220 kN ... AUTHOR Alber, Michael PUBLISHED 2006 TITLE Design Development & Installation Of Glass Fibre Reinforced Polymer (GRP) "Soft Eyes" In Diaphragm Wall Reinforcement Cages.  SUMMARY ... As previously stated, composite rebar has a relatively low tensile and compressive strength perpendicular to the orientation of the fibres, ie low shear ... AUTHOR Wiltcher, Paul M. PUBLISHED 2006 TITLE Quality Management For Grouted Rockbolts  SUMMARY ... the following mechanical parameters: maximum tensile strength, strength at the ... the compressive or bending strength of the ... the properties of the rebar and the ... AUTHOR Wittenberg, Dieter PUBLISHED 2000 TITLE The Use of Polymer Concrete in Sewage Tunnels for One-Pass Segmental Linings  SUMMARY ... Polymer concrete has far higher compressive and tensile strength than Portland cement, and the inclusion of a rebar cage is probably not needed for tunnel ... AUTHOR Maguire, Christian PUBLISHED 2008 TITLE Coal Mine Primary Support Selection: Tension Versus Non Tensioned Roof Bolt Systems  SUMMARY ... force of the dome upon release stretches the ungrouted rebar, by pulling ... based numerical ahaiyx.s are gendly compressive strmgth, tensile strength, and modulus ... AUTHOR Unrug, Kot PUBLISHED 2004 TITLE Optimizing Rebar Resin Annulus  SUMMARY ... OPTIMIZING REBAR RESIN ANNULUS ... resin bolts is not a valid indication of resin strength, as the resin anchorage is stronger than the tensile strength of the bolt ... AUTHOR Campoli, A. A. ; Mills, P. S. ; Todd, P. ; Dever, K. PUBLISHED 2000 TITLE Technical Note - Optimizing Rebar Resin Annulus  SUMMARY ... Optimizing rebar resin annulus ... is not a valid indication of resin strength, as the resin an- chorage is stronger than the tensile strength of the bolt. ... AUTHOR Campoli, A. A. ; Mills, P. S. ; Todd, P. ; Dever, K. PUBLISHED 2003 TITLE Load Capacity and Bond Behavior of Resin Grouted Rock Bolts  SUMMARY ... the bolt is very deep, in some rock types the shear strength between resin and rock may be so strong that the steel rebar exceeds its tensile strength and is ... AUTHOR Slatalla, Nic PUBLISHED 2006 TITLE Floor Bolting For Control Of Mine Floor Heave  SUMMARY ... The headed grade 75 rebar. 20 mm x 1.2 m (0.8-in. x 4-ft) long, has respective yield and tensile strength values of 20 to 27 t (44,000 and 60.000 Ibs). ... AUTHOR Stankus, J. C. ; Peng, S. S. PUBLISHED 1995 Showing: 1 to 10 of 218 matches for "rebar tensile strength"  Page   1   2   3   4   5   6   7   8   9  next Search Again