Blasting Physics-What the Operator Can Use in 1975

- Organization:
- The Australasian Institute of Mining and Metallurgy
- Pages:
- 18
- File Size:
- 339 KB
- Publication Date:
- Jan 1, 1975
Abstract
Blasting effectiveness must be gauged by total production costs. ANFO charges made up in polythene "sausages" are not as profitable as is indicated by the price of ANFO. All-slurry charges are warranted only where blastholes cannot be dewatered effectively, or where drilling costs are very high. An increase in blasthole diameter leads to coarser fragmentation. This effect is most pronounced in tough and massive or blocky strata, or in ground which consists of unfissured boulders in a softer matrix. When ANFO and some slurry-type charges of small diameter are used in plastic-acting ground, charges may fail to detonate through precompression by charges fired on an earlier delay. The optimum blasthole length is rarely less than four times the burden distance. For best results, blastholes should be inclined to the vertical and parallel to the face. Nominal burdens and spacings are often altered radically by the initiation sequence. For best fragmentation, all blastholes must have good effective faces, and should be effectively stagg- ered with an actual spacing:burden ratio in the approximate range 2.0-5.0.
Citation
APA: (1975) Blasting Physics-What the Operator Can Use in 1975
MLA: Blasting Physics-What the Operator Can Use in 1975. The Australasian Institute of Mining and Metallurgy, 1975.