Discussions - Of Mr. Colby's Paper on Comparison of American and Foreign Rail-Specifications, with a Proposed Standard Specification to Cover American Rails Rolled for Export (see p. 576)

The American Institute of Mining, Metallurgical, and Petroleum Engineers
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
20
File Size:
770 KB
Publication Date:
Jan 1, 1907

Abstract

E. Windsor Richards, London, England:—In reading this paper the most interesting point to me mas the question of the maximum percentage of phosphorus allowable in the steel rail. Mr. Colby said, and we will all agree with him, that the engineer knew, and even a steel-rail maker grants that phosphorus is the most undesirable constituent of steel. We in England have been for a long time considering a specification for the supply of steel rails. This matter has been taken up by the Institution of Civil Engineers, the Mechanical Engineers, the Iron and Steel Institute, the Institute of Naval Architects, and the Electrical Engineers. Committees have been formed,and the whole matter has received most careful attention. They arrived at last at an analysis which I will read: " The carbon is to be from 0.35 to 0.5 per cent.; the manganese from 0.7 to 1.0 per cent.; the silicon, not to exceed 0.10 per cent.; phosphorus, 0.07; and sulphur, 0.07 per cent." As to the phosphorus, which is the most important point of all in the analysis, we have for many years, and indeed until very lately, always agreed to supply steel which would not contain above 0.06 per cent. of phosphorus. Iron-ores are not quite as good now as they were formerly, and the manufacturers at the meetings of the committees referred to, tried to obtain an increase in the allowance of phosphorus. They asked the Sub-committee to agree to 0.08 per cent. of phosphorus. They tried all they possibly could to obtain that; but they failed. English engineers in Great George Street and all over England, representing the important Associa tions I have mentioned, would only agree to 0.07 per cent. and that is the maximum allowance of phosphorus. Mr. Colby is an able advocate, but with all his ability he would not have been able to persuade the English engineers to agree to 0.08 per cent.
Citation

APA:  (1907)  Discussions - Of Mr. Colby's Paper on Comparison of American and Foreign Rail-Specifications, with a Proposed Standard Specification to Cover American Rails Rolled for Export (see p. 576)

MLA: Discussions - Of Mr. Colby's Paper on Comparison of American and Foreign Rail-Specifications, with a Proposed Standard Specification to Cover American Rails Rolled for Export (see p. 576). The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1907.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account