Dominating Mechanisms of the Surface Modification of Natural Sulfides Following Treatment by High-Power Electromagnetic Pulses

Canadian Institute of Mining, Metallurgy and Petroleum
V. ?. Chanturiya I. Zh. Bunin M. V. Ryazantseva
Organization:
Canadian Institute of Mining, Metallurgy and Petroleum
Pages:
8
File Size:
879 KB
Publication Date:
Jan 1, 2016

Abstract

"Surface changes in naturally occurring metal sulfides (pyrite, arsenopyrite, sphalerite, chalcopyrite, galena, and molybdenite) due to treatments from high-power electromagnetic pulses (HPEMP) at varying times were studied using X-ray photoelectron spectroscopy. Analysis of the obtained results revealed common patterns and differences in surface transformations. The transformations were found to include two main stages. The first stage was observed at low treatment intensities (up to n ~103 pulses). At this stage, formation and accumulation in the surface layer of the nonstoichiometric sulfide phase, oxides and hydroxides, as well as elemental (polysulfide) sulfur and/or metastable sulfur species (thiosulfate, sulfite) was observed. The second stage (N = 3·103 pulses) is characterized by thermal removal of sulfur species and renewal of the mineral surface (sulfidization).It was found that the chemical changes of the sulfur on the surface layer of pyrite, arsenopyrite, chalcopyrite included accumulation/formation of S0 (Sn 2-) at the first stage of the transformation, followed by its removal. An increase in the surface concentration of elemental sulfur for pyrite and chalcopyrite was 10–12% while arsenopyrite was approximately 5%. A more complicated chemical change was observed for sphalerite and galena, that included formation/accumulation of metastable sulfur species (thiosulfate, sulfate) at the initial stage (up to 103 pulses) and during longer treatment times, the sulphur is reduced back to its initial state (sulfide or disulfide). The increased concentration of S0 sulfur, compared to the original sample, was only 3% in galena and sphalerite.The application of HPEMP treatment to improve flotation selectivity is supported by singlemineral flotation tests. Changes in flotability as a result of HPEMP treatment are principally explained by surface phase changes that resulted in higher adsorption activity."
Citation

APA: V. ?. Chanturiya I. Zh. Bunin M. V. Ryazantseva  (2016)  Dominating Mechanisms of the Surface Modification of Natural Sulfides Following Treatment by High-Power Electromagnetic Pulses

MLA: V. ?. Chanturiya I. Zh. Bunin M. V. Ryazantseva Dominating Mechanisms of the Surface Modification of Natural Sulfides Following Treatment by High-Power Electromagnetic Pulses. Canadian Institute of Mining, Metallurgy and Petroleum, 2016.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account