Effects of Solids Concentration on Gas Dispersion in Industrial Mechanical Cells

Society for Mining, Metallurgy & Exploration
F. López-Saucedo A. Uribe-Salas Dávila-Pulido. G. L. Magallanes-Hernández J. Batista Rodríguez
Organization:
Society for Mining, Metallurgy & Exploration
Pages:
6
File Size:
279 KB
Publication Date:
Jan 1, 2017

Abstract

"This paper presents the results of tests performed to study the effect of slurry solids concentration on the behavior of gas dispersion in industrial-scale mechanical flotation cells. The experiments were conducted at five concentrator facilities run by a Mexican mining company, specifically in the rougher bank of the lead/zinc flotation circuits. Those mechanical cells having significant contribution to the performance of the circuit, that is, the cells that enable high recovery, were characterized. The measurement protocol enables measurement of the superficial gas velocity, gas holdup and bubble size, and sampling of the mineral slurry. The measured data indicate that bubble size and gas holdup decreases as the concentration of solids increases. IntroductionThe process of mineral concentration by flotation is based on contact between particles and air bubbles, the selective adhesion of hydrophobic particles onto the bubbles, and the rising of the bubble-particle aggregates to the surface of the flotation cell to overflow over the lip to form the concentrate. It is now accepted that the physical and chemical process variables that control the flotation of hydrophobic particles are closely related to gas dispersion (Schwarz and Alexander, 2005). Gas dispersion is defined by the superficial gas velocity, Jg (Torrealba-Vargas, Gomez and Finch, 2006), the gas holdup, eg (Tavera, Gomez and Finch, 1997), the bubble size, d32 (Dobby and Finch, 1986; Gorain et al., 1995; Hernandez-Aguilar et al., 2004) , and the bubble surface area flux, Sb (Manqiu and Finch, 1989; Manqiu, Finch and Uribe-Salas, 1991). In recent years, the advances that have been made in sensor technology have enabled the characterization of gas dispersion in industrial flotation cells with excellent results (Gomez and Finch, 2007). This technology advancement has allowed the gaining of a deeper understanding of such complex mechanisms as carrying capacity (Yianatos and Contreras, 2010), collection efficiency (Gorain, Franzidis and Manlapig, 1997; Massinaei et al., 2009) and bubble coalescence (Finch, Nesset and Acuña, 2008; Zangooi, Gomez and Finch, 2010)."
Citation

APA: F. López-Saucedo A. Uribe-Salas Dávila-Pulido. G. L. Magallanes-Hernández J. Batista Rodríguez  (2017)  Effects of Solids Concentration on Gas Dispersion in Industrial Mechanical Cells

MLA: F. López-Saucedo A. Uribe-Salas Dávila-Pulido. G. L. Magallanes-Hernández J. Batista Rodríguez Effects of Solids Concentration on Gas Dispersion in Industrial Mechanical Cells. Society for Mining, Metallurgy & Exploration, 2017.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account