Heap Leaching Gold-Silver Ores With Poor Percolation Characteristics

- Organization:
- Society for Mining, Metallurgy & Exploration
- Pages:
- 7
- File Size:
- 1758 KB
- Publication Date:
- Jan 1, 1981
Abstract
To maximize productivity and improve minerals processing technology, the U. S. Department of the Interior, Bureau of Mines, is investigating a particle agglomeration technique as a means of increasing the percolation rate of leaching solutions through heaps of clayey or finely crushed, low- grade, gold-silver ores. Bench-scale and pilot-scale experiments conducted on different ores indicated that the percolation rate of cyanide leaching solution was enhanced markedly by mixing the ore with a binder, such as lime or portland cement, moistening the mixture, then mechanically agglomerating and aging the feed prior to heap building and leaching. In addition, the rate of silver and gold extraction markedly increased without sacrificing total recovery of values. The use of concentrated cyanide solution instead of water during the agglomeration procedure substantially decreased the leaching time required to obtain maximum recovery. Results from bench-scale and pilot-scale experiments using the particle agglomeration technique are discussed.
Citation
APA:
(1981) Heap Leaching Gold-Silver Ores With Poor Percolation CharacteristicsMLA: Heap Leaching Gold-Silver Ores With Poor Percolation Characteristics. Society for Mining, Metallurgy & Exploration, 1981.