IC 7800 Mining, Processing, And Costs - Idaho Almaden Mercury Mine, Washington County, Idaho ? Summary

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 37
- File Size:
- 13190 KB
- Publication Date:
- Jan 1, 1957
Abstract
Mercury was produced originally at the Idaho Almaden mine from 1939 to 1942. When the ;.nine was shut down, more than 100,000 tons of ore, containing from 2.5 to 3 pounds of mercury per ton, was known to be adjacent to old workings but had been considered too low grade for commercial operation. Later, detailed, systematic exploration by Rare Metals Corporation of America increased and delimited enough minable reserves for further operation to be foreseen for several years. The average grade of the ore is estimated at slightly more than 3.5 pounds of mercury per ton. Open-pit mining and installation of the largest rotary kiln in the United States furnacing mercury ore have made possible profitable exploitation of these reserves (fig. 1). The bulk of the exploration was by percussion drilling, although some diamond drilling was done to check the results. When enough reserves were indicated to assure a successful operation, stripping and plant construction were started simultaneously. Figure 2 is a general view of the plant. The ore bodies, although irregular in size, shape, and grade and covered by essentially barren cap rock, are amenable to low-cost, trackless, open-pit mining. Development consists of stripping the overburden and removing, barren cap rock. Ore is being mined at approximately [5],000 tons per month and treated in a 175-ton-per-day furnacing plant.
Citation
APA:
(1957) IC 7800 Mining, Processing, And Costs - Idaho Almaden Mercury Mine, Washington County, Idaho ? SummaryMLA: IC 7800 Mining, Processing, And Costs - Idaho Almaden Mercury Mine, Washington County, Idaho ? Summary. The National Institute for Occupational Safety and Health (NIOSH), 1957.