OFR-7-78 Improving Coal Mine Roof Stability By Pillar Softening

The National Institute for Occupational Safety and Health (NIOSH)
Bruce Maxwell
Organization:
The National Institute for Occupational Safety and Health (NIOSH)
Pages:
107
File Size:
22690 KB
Publication Date:
Jan 1, 1977

Abstract

The deformation modulus of coal mine pillars theoretically can be reduced by drilling holes in advance of the mining face. This reduction of modulus along the edge of the pillar has the effect of decreasing the stress concentration in the roof; control of roof caving is thereby predicted. Initial field work indicated that a high horizontal stress field existed at the field test site: Subsequent field work was undertaken to confirm the high horizontal stress field and to attempt to relieve the horizontal stress in the immediate roof. A method of softening pillars in conjunction with normal mining activity was developed. Instruments to measure horizontal roof strain, roof parting, roof tilt at the rib, and changes in vertical and horizontal stress in the roof and in the coal were used. These instruments were installed in both softened and unsoftened entries and in locations to indicate the effect of vertical slots in the roof. Significant stress reduction due to pillar softening was indicated, but the effect of this reduction on roof stability was not established. The vertical roof slots relieved the horizontal stress in the immediate roof very effectively, and observations of roof conditions indicated that the slots definitely improved roof stability.
Citation

APA: Bruce Maxwell  (1977)  OFR-7-78 Improving Coal Mine Roof Stability By Pillar Softening

MLA: Bruce Maxwell OFR-7-78 Improving Coal Mine Roof Stability By Pillar Softening. The National Institute for Occupational Safety and Health (NIOSH), 1977.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account