Papers - Cleveland Meeting – September, 1929 - Iron-ore Sinter (With Discussion)

The American Institute of Mining, Metallurgical, and Petroleum Engineers
G. M. Schwarz
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
29
File Size:
3033 KB
Publication Date:
Jan 1, 1929

Abstract

There has been considerable controversy regarding the structure and mineral constituents produced when iron ore is sintered. This investigation was undertaken in order to establish the fundamental reactions that take place in the sintering process by determining the nature of the resulting minerals. The writer's immediate interest in the subject arose mainly from the request of E. W. Davis for information based on a microscopic study of sinter submitted by him in May, 1926. In the author's preliminary work, samples of iron-ore sinter were secured from the Minnesota School of Mines Experiment Station and from commercial plants. These were polished by the usual methods for polishing opaque ores. In order to study these surfaces satisfactorily, it is necessary to magnify them rather highly, a range from 100 to 1000 dia. being used. For the higher magnifications oil-immersion lenses and an intense source of light are necessary. After the preliminary study had shown the problems involved, a series of small samples were sintered under carefully controlled conditions and with analyzed materials. Variations in the relative amounts of ore, coal and water were made in order to study the effect of each constituent. The attempt has been to arrive at a clearer understanding of the sintering process and the reactions involved without reference to any preconceived notion as to sinter. It is clear that the study of polished surfaces has yielded results not possible with thin sections alone. The thin sections made in this work were found unsatisfactory at magnification greater than 75, whereas magnifications of 1000 were easily studied with reflected light on carefully polished surfaces. A rather complete statement of observed facts is made so that the reader may form his own conclusions. The writer's interpretations are suggested. It is to be hoped that a more complete understanding of the structure arid composition of iron sinter, as well as the changes which go on during
Citation

APA: G. M. Schwarz  (1929)  Papers - Cleveland Meeting – September, 1929 - Iron-ore Sinter (With Discussion)

MLA: G. M. Schwarz Papers - Cleveland Meeting – September, 1929 - Iron-ore Sinter (With Discussion). The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1929.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account