Papers - Experiments Demonstrate Method of Producing Artificial Manganese Ore (With Discussion)

The American Institute of Mining, Metallurgical, and Petroleum Engineers
T. L. Joseph E. P. Barrett C. E. Wood
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
29
File Size:
1086 KB
Publication Date:
Jan 1, 1930

Abstract

The United States Bureau of Mines has been studying the blastfurnace process for about ten years. An experimental furnace was developed by the Burcau in cooperation with the Minnesota School of Mines Experiment Station, University of Minnesota. Many data have been obtained and published.' Royster, Joseph and Kinney §(48) found that the particle size of ore had an important effect upon the blast-furnace process. Kinne(28) stated: Economy in blast-furnace practice depends largely upon efficient gas-solid contact in the shaft of the furnace. If efficient work is not done in the shaft, the hearth and bosh will not function properly. A condition may be readily imagined where the particles of ore in the shaft are so large that the time entailed in the descent of these materials into the bosh is not sufficient to permit proper reduction and preparation prior to the time the ore enters the bosh of the furnace. Another condition may be pictured where the density of theatock column and the flow of stock is such that the ore will take one course and the gas another. Both of these examples will result in insufficient contact between the gas and the ore. Unreduced ore will reach the hearth, and the gas which has not been efficiently oxidized will reach the stock line. The result is the use of an excess of carbon in the smelting process. It is obvious that fine ore particles occurring in the ore as charged, or formed in the furnace due to heat and mechanical action, place a definite limitation upon the efficiency of the operation. There is also an economic loss of fine material as dust. Effect of Size of Material Kinney reported (p. 83(29)) the reduction of iron oxides between planes at three furnaces as given in Table 1. The Chicago furnace was operated on Lake ores. Distribution of gas was not good and much of the charge passed into the hearth before the iron oxide was reduced. The Holt furnace was operated on coarse ore. Distribution of gas was fairly uni-
Citation

APA: T. L. Joseph E. P. Barrett C. E. Wood  (1930)  Papers - Experiments Demonstrate Method of Producing Artificial Manganese Ore (With Discussion)

MLA: T. L. Joseph E. P. Barrett C. E. Wood Papers - Experiments Demonstrate Method of Producing Artificial Manganese Ore (With Discussion). The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1930.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account