Predicting Anomalous Zone Ahead of TBM Tunnel Face Utilizing Electrical Resistivity

Society for Mining, Metallurgy & Exploration
Parkm Jinho Kang-Hyun Lee Byung-Kyu Kim Seoung-Won Lee In-Mo Lee
Organization:
Society for Mining, Metallurgy & Exploration
Pages:
10
File Size:
1101 KB
Publication Date:
Jan 1, 2016

Abstract

"In this study, the TBM Resistivity Prediction (TRP) system is developed for predicting the location, thickness, permittivity ratio and electrical conductivity of anomalous zones ahead of tunnel face using the measured resistivity of the ground. The applicability of the developed system was verified by performing field tests at a construction site in which an EPB-shield TBM is used for tunnelling work. In the first field test, it was found that the rock around the tunnel face had the same resistivity and permittivity with the rock ahead of the tunnel face indicating no anomaly ahead of the tunnel face. In the second test, a stronger zone 5-m thick was predicted ahead of the tunnel face based on lower permittivity than that of the rock around the tunnel face. The ground condition assessed by the newly developed TRP system matched well with that either predicted from geophysical exploration or directly obtained from drilling boreholes or from daily observed muck conditions. INTRODUCTION During tunneling work, the emergence of unpredicted zones of relatively weaker or stronger ground can lead to delays in construction work or an increase of construction cost. Predicting anomalous zones ahead of tunnel face in advance can thus prevent time and economic loss. For these reasons, various methods to predict the ground condition ahead of the tunnel face have been studied and developed. Prediction methods using various kinds of equipment include tunnel seismic prediction, ground penetrating radar, electromagnetic surveys based on electronic antennas, and electrical resistivity surveys conducted by analyzing electric currents in the ground ahead of the tunnel face (Ryu et al. 2008). However, most of the prediction methods are only applicable to conventional tunneling job sites, which feature free access to the tunnel face. In mechanized tunneling projects, accessibility to the tunnel face is very limited because the tunnel face is occupied by the TBM."
Citation

APA: Parkm Jinho Kang-Hyun Lee Byung-Kyu Kim Seoung-Won Lee In-Mo Lee  (2016)  Predicting Anomalous Zone Ahead of TBM Tunnel Face Utilizing Electrical Resistivity

MLA: Parkm Jinho Kang-Hyun Lee Byung-Kyu Kim Seoung-Won Lee In-Mo Lee Predicting Anomalous Zone Ahead of TBM Tunnel Face Utilizing Electrical Resistivity. Society for Mining, Metallurgy & Exploration, 2016.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account