Progress Report on Use of On-Stream X-ray Analyser at Mattagami Lake Mines Limited

Canadian Institute of Mining, Metallurgy and Petroleum
K. V. Konigsmann
Organization:
Canadian Institute of Mining, Metallurgy and Petroleum
Pages:
19
File Size:
590 KB
Publication Date:
Jan 1, 1969

Abstract

"The mill at Mattagami Lake Mines treats 3,850 tons per day. The mill feed is a heavy sulphide ore. It is composed ofPyrite & Pyrrhotite - 40%Marmatite - 17%Chalcopyrite - 2%Magnetite - 10%Talc and other Silicates - 31%The sulphides are intimately associated with each other and often finely disseminated throughout the siliceous gangue. An abundance of middling particles exist in the circuit and a delicate balance has to be maintained between concentrate grades and metal recoveries.The metal content of the mill feed fluctuates between 0.4 to 0.7% for copper and 6 to 13% for zinc.The flow sheet of the concentrator is shown in Figure 1.Eight sample streams have been selected for on-stream analysis, namely1. Copper Concentrate 2. Copper Cln Tailings 3. Copper Tailings 4. Zinc Concentrate5. Zinc Rgh Concentrate6. Zinc Cln Tailings7. Zinc Rgh Tailings8. Flotation TailingsThe mill feed is not being analysed. Only a very coarse sample could be obtained which would be difficult to pump, and the fluctuations in the copper content are too small in absolute terms to have much of a bearing on circuit operations."
Citation

APA: K. V. Konigsmann  (1969)  Progress Report on Use of On-Stream X-ray Analyser at Mattagami Lake Mines Limited

MLA: K. V. Konigsmann Progress Report on Use of On-Stream X-ray Analyser at Mattagami Lake Mines Limited. Canadian Institute of Mining, Metallurgy and Petroleum, 1969.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account