RI 2678 Some Common Mistakes In Operating A Stoker-Fired Boiler

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 6
- File Size:
- 486 KB
- Publication Date:
- Mar 1, 1925
Abstract
"Conservation of fuel in boiler-plant practice is one of the major projects of the Bureau of Mines. The large central stations with their corps of trained operators and with refined equipment obtain relatively good efficiency. It is in the many smaller isolated plants that the large fuel wastes are apt to occur. Some operators seem to feel that their responsibility is largely expressed in the phase the phase ""carry the load,"" rather than ""carry the load and carry it efficiently."" Often equipment is not provided to give sufficiently accurate guidance to the operator.In within many such plants, it is interesting to note how frequently the same mistakes occur. The following quite typical example illustrates some of these circumstances and their effort on operation. The boiler plant consisted of two 1000 hp. boilers equipped with multiple retort under-feed stokers. These were horizontal water-tube boilers with horizontal baffling, having a high bridge wall at the back of the stoker. One boilers was used to carry a summer carry a winter load of about 1250 hp. The operators felt that one boiler was not sufficient to carry the winter load. No instruments are available for the operator's use, excepting the steam ores sure gases."
Citation
APA:
(1925) RI 2678 Some Common Mistakes In Operating A Stoker-Fired BoilerMLA: RI 2678 Some Common Mistakes In Operating A Stoker-Fired Boiler. The National Institute for Occupational Safety and Health (NIOSH), 1925.