RI 3106 Leaching Oxidized Copper Ores: Effect Of Strength Of Acid In Leaching Solvent ? Introduction

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 15
- File Size:
- 4155 KB
- Publication Date:
- Jan 1, 1931
Abstract
In leaching copper ores knowledge of the rate of dissolution of the copper minerals and of the impurities is desirable. With knowledge of these two factors and data as to what minerals are present in the ore the metallurgist has an excellent start on planning a leach¬ing cycle to fit that ore. The rate of dissolution is rather difficult to predict, and the time required to leach a given ore may differ markedly from that required by another ore. The whole study as related to mixed oxidized and sulphide ores is one of relative rates of dissolution of the different copper minerals and the impurities in sulphuric acid and in ferric sulphate. The aim of leaching is to choose a cycle and strength of solvents to ex¬tract a maximum amount of copper and a minimum of impurities. The consumption of reagents per unit of copper dissolved is a function of the strength of the reagents used and the relative rates of attack on copper minerals and impurities. An opportunity may exist of ob¬taining the kind of electrolyte wanted for electrolytic precipitation and yet of saving on the consumption of reagents by modifying the strength of ferric sulphate and of sulphuric acid during the cycle to fit the time needed for dissolving the sulphide and oxidized minerals present. Former papers have considered the rate of dissolution of azurite, malachite, tenorite, chrysocolla, cuprite, chalcocite, boruite, and covellite in common leaching solvents. A paper soon to be written will consider some of the less important copper minerals. The present paper considers the rate of dissolution of copper from ores of the Southwest in sulphuric acid of varying strength and the ratio of sulphuric acid consumed to copper dis¬solved. In this study two ores containing the copper principally in an oxidized condition were used. A study of other ores, especially those containing high percentages of sulphide copper minerals, would be desirable, but since consumption of acid has paramount interest,
Citation
APA:
(1931) RI 3106 Leaching Oxidized Copper Ores: Effect Of Strength Of Acid In Leaching Solvent ? IntroductionMLA: RI 3106 Leaching Oxidized Copper Ores: Effect Of Strength Of Acid In Leaching Solvent ? Introduction. The National Institute for Occupational Safety and Health (NIOSH), 1931.