RI 5297 Production Of Crude Ammonia-Synthesis Gas From North Dakota Lignite In An Annular-Retort Gasifier

The National Institute for Occupational Safety and Health (NIOSH)
W. H. Oppelt
Organization:
The National Institute for Occupational Safety and Health (NIOSH)
Pages:
33
File Size:
7989 KB
Publication Date:
Jan 1, 1957

Abstract

A small, annular-retort gasifier having a nominal capacity of 40 pounds of lignite per hour was designed and constructed at the Lignite Experiment Station, Grand Forks, N. Dak. The purpose of the investigation was to increase the capacity of an annular-retort gasifier by better temperature distribution in the heating chamber (adjacent to the annulus) and by supplemental internal heating with controlled amounts of air. Correct control of air admission should yield crude ammonia-synthesis gas having a (H2+CO)-N2 ratio of 3. Dakota Star stoker-size lignite was used during the exploratory experimental program. The effects of temperature level and distribution in the heating chamber and of addition of air to the reactor were investigated. Hydrogen - carbon monoxide ratios ranged from 1.9 to 2.5, and (H2+C0)-N2 ratios were as low as 2.9. Hourly gas production ranged from 970 to 2,580 cu. ft., or 62.0 to 164 cu. ft. per sq. ft. of heated surface, or 350 to 940 cu. ft. per cu. ft. of reactor volume. Data from the small gasifier could be readily correlated with those previously obtained in the commercial-scale unit under comparable experimental conditions.
Citation

APA: W. H. Oppelt  (1957)  RI 5297 Production Of Crude Ammonia-Synthesis Gas From North Dakota Lignite In An Annular-Retort Gasifier

MLA: W. H. Oppelt RI 5297 Production Of Crude Ammonia-Synthesis Gas From North Dakota Lignite In An Annular-Retort Gasifier. The National Institute for Occupational Safety and Health (NIOSH), 1957.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account