RI 5602 Separation Of Chloride Vapors During Ilmenite Chlorination ? Summary

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 15
- File Size:
- 5414 KB
- Publication Date:
- Jan 1, 1960
Abstract
This paper presents the results of research undertaken to recover titanium and columbium by low-temperature chlorination of low-grade columbium-bearing ilmenite concentrates, and to simultaneously remove chlorinated impurities from the volatile chlorides without resort to distillation. Coke-reduced ilmenite was chlorinated at 400° to 500° C., and the resulting TiC14 was free of most impurities before condensation. A heated purification column was used wherein various packing materials reacted chemically or physically with the impurities which passed through them in the vapor phase. A nearly water-white TiC14 product was obtained directly. The principal impurities in the titanium tetrachloride were: 0.02 percent Fe, 0.01 percent V, 0.05 percent A1, 0.04 percent Si, and 0.07 percent Cb. This is a less pure product than commercial TiC14. Most of the columbium was recovered as crude CbC15, requiring further refining.
Citation
APA:
(1960) RI 5602 Separation Of Chloride Vapors During Ilmenite Chlorination ? SummaryMLA: RI 5602 Separation Of Chloride Vapors During Ilmenite Chlorination ? Summary. The National Institute for Occupational Safety and Health (NIOSH), 1960.