RI 5745 Downward-Flowing Granular Solids As Pressure Seals In Vertical Standpipes ? Summary

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 35
- File Size:
- 5309 KB
- Publication Date:
- Jan 1, 1961
Abstract
Experiments were conducted in 2- and 4-inch-diameter standpipes to evaluate the effectiveness of standpipes as pressure seals. During the experiments, these standpipes conveyed Alan-Wood magnetite (60 to 230 U.S. standard sieve mesh) by gravity flow from one vessel to another of relatively higher pressure. The information obtained has been helpful in a Federal Bureau of Mines investigation of how to make either synthesis gas or hydrogen by a modified steam-iron process employing a continuous recycling stream of granular iron-iron oxide at temperatures of 600° to 900° C. In this process the mixture of granular material flows by gravity from a reduction vessel at low pressures to an oxidation vessel at higher pressures. Data from the 2- and 4-inch-diameter standpipes indicate that it would be practical to use a standpipe as a pressure seal between the reductor and oxidizer. Investigators found that, by gravity flow, the standpipe could convey the Alan-Wood magnetite against pressure gradients up to 1.07 pounds per square inch per foot of column height.
Citation
APA:
(1961) RI 5745 Downward-Flowing Granular Solids As Pressure Seals In Vertical Standpipes ? SummaryMLA: RI 5745 Downward-Flowing Granular Solids As Pressure Seals In Vertical Standpipes ? Summary. The National Institute for Occupational Safety and Health (NIOSH), 1961.