RI 6062 Metallurgical Studies Of Rhodonite Ores, Silverton District, Colorado (In Three Parts) 2. Producing Silicomanganese By Electric Furnace Smelting - Summary

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 16
- File Size:
- 3736 KB
- Publication Date:
- Jan 1, 1962
Abstract
Rhodonite, a manganese silicate, occurs as an important component of extensive veins in the San Juan district of Colorado. Recent work by the Bureau of Mines has demonstrated that typical ores of the area can be upgraded to about 30-percent manganese content. Because of their siliceous nature, such concentrates require further processing to convert the manganese into more usable forms. The investigation described in this report demonstrates the technical feasibility of producing silicomanganese from a rhodonitic concentrate by electric smelting methods. The rhodonitic concentrate used in the smelting research was prepared by dry high-intensity magnetic separation of ore from the Silver Queen vein. The concentrate contained 29 percent manganese, 2 percent iron, and 41 percent silica. The principal minerals in the concentrate were 35 percent rhodonite, 30 percent rhodochrosite, and 25 percent quartz and chalcedony. Limestone was used as the flux and coal was used as the reductant. These minerals were crushed and screened to minus 1/2-inch plus la-mesh size.
Citation
APA:
(1962) RI 6062 Metallurgical Studies Of Rhodonite Ores, Silverton District, Colorado (In Three Parts) 2. Producing Silicomanganese By Electric Furnace Smelting - SummaryMLA: RI 6062 Metallurgical Studies Of Rhodonite Ores, Silverton District, Colorado (In Three Parts) 2. Producing Silicomanganese By Electric Furnace Smelting - Summary. The National Institute for Occupational Safety and Health (NIOSH), 1962.