RI 6264 Flash Irradiation Of Coal

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 11
- File Size:
- 1734 KB
- Publication Date:
- Jan 1, 1963
Abstract
As an exploratory effort to produce useful products from coal by a new path, the Bureau has made a few experiments on the fast heating of finely ground coal particles by irradiation with a flash of high intensity light. The flash was produced by an electrical discharge at high voltage through a xenon-filled tube. The flashes lasted from 2 to 3 milliseconds. The reaction took place in small sample tubes, ½ inch-dimeter by 4 inches long, and with small amounts of coal (total amount charged 0.1 gram, probable effective amount not more than 20 milligrams). Average particle size of the coal, estimated on a numerical basis, was 20 microns. Temperatures reached were evidently quite high, because all products obtained in quantity were characteristic of high temperature pyrolysis. Apparently, conversion of the coal was extensive where isolated particles received the full benefit of a flash. It seems particularly significant that acetylene was present in appreciable amounts--comprising almost 3 percent of the total gaseous product in one case. This is good evidence of a short heating period to very high temperature (well above 1,000° C) followed by rapid quenching. Although the results are interesting, they do not suggest any immediate practical application.
Citation
APA:
(1963) RI 6264 Flash Irradiation Of CoalMLA: RI 6264 Flash Irradiation Of Coal. The National Institute for Occupational Safety and Health (NIOSH), 1963.