RI 6309 Hazards in Using Liquid Hydrogen in Bubble Chambers

The National Institute for Occupational Safety and Health (NIOSH)
Michael G. Zabetakis Aldo L. Furno Henry E. Perlee
Organization:
The National Institute for Occupational Safety and Health (NIOSH)
Pages:
46
File Size:
5523 KB
Publication Date:
Jan 1, 1963

Abstract

The Bureau of Mines conducted an experimental study with liquid and gaseous hydrogen to determine the hazards associated with the use of liquid hydrogen as an ionizing particle detector in bubble chambers . The glass window , the vacuum chamber , and the vent system were investigated . In addition , a study was made of the detection and ignition of escaping hydrogen and of the available electrical equipment for use in hydrogen atmospheres . Materials such as tempered glass , aluminum , and stainless steel are not penetrated readily by the small fragments formed when fully tempered glass is shattered and propelled by hydrogen at initial pressures up to 100 psig ; long , slender fragments from untempered glass may penetrate thin walls of relatively soft materials such as rubber gaskets and lead . Hydrogen can be vented satisfactorily from a vacuum chamber with a well - designed vent system . However , the rapid leakage of hydrogen into the surrounding air is a serious problem because the available detectors are satisfactory only when the accumulation of hydrogen is slow . Much of the electrical equipment currently available was designed for use in hydrogen- air atmospheres .
Citation

APA: Michael G. Zabetakis Aldo L. Furno Henry E. Perlee  (1963)  RI 6309 Hazards in Using Liquid Hydrogen in Bubble Chambers

MLA: Michael G. Zabetakis Aldo L. Furno Henry E. Perlee RI 6309 Hazards in Using Liquid Hydrogen in Bubble Chambers. The National Institute for Occupational Safety and Health (NIOSH), 1963.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account