RI 6605 Destroying The Caking Quality Of Bituminous Coal By Thermal And Oxidative Treatment In A Fixed Bed On A Pilot Plant Scale

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 22
- File Size:
- 6015 KB
- Publication Date:
- Jan 1, 1965
Abstract
A method for destroying the caking properties of bituminous coal was developed by the Bureau of Mines. Coal is treated in a fixed bed by heating through its plastic range under controlled temperatures in mildly oxidative atmospheres composed of inert gas and/or steam containing about 1 volume-percent oxygen. High-volatile A (hvab) and high-volatile B (hvbb) and low-volatile bituminous (lvb) coals in the size range 1/8 to 1-1/2 inches were successfully treated at 0 (atmospheric pressure) to 300 psig in static beds 6 to 18 inches deep. Conditions of treatment depended on the coal and ranged from 80 to 200 minutes at 350° to 510° C. Char produced in this manner from hvab coal was gasified with steam at 800° C and 100 psig in a fixed bed in one series of tests and in other tests was exposed to hydrogen in a dilute co current free-falling-bed system at 750° C and 3,000 psig without agglomerating.
Citation
APA:
(1965) RI 6605 Destroying The Caking Quality Of Bituminous Coal By Thermal And Oxidative Treatment In A Fixed Bed On A Pilot Plant ScaleMLA: RI 6605 Destroying The Caking Quality Of Bituminous Coal By Thermal And Oxidative Treatment In A Fixed Bed On A Pilot Plant Scale. The National Institute for Occupational Safety and Health (NIOSH), 1965.