RI 7362 Removal Of Magnesium Impurities From Phosphate Rock Concentrates

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 15
- File Size:
- 735 KB
- Publication Date:
- Jan 1, 1970
Abstract
Laboratory tests were conducted to study removal of magnesium impurities from western phosphate rock concentrates by selective leaching. The systems evaluated included leaching with dilute sulfuric acid, with ammonium sulfate, and in an aqueous medium with sulfur dioxide gas. Set standards for the magnesium impurity level of phosphate rock concentrates are not available, but industrial practice has indicated that magnesium in excess of 0.3 percent MgO causes problems in phosphoric acid manufacture. Removal of magnesium was accomplished with all three systems. With dilute H2S04 the magnesium level was reduced to less than 0.1 percent MgO with an accompanying P205 loss of 6 percent. Magnesium oxide levels from 0.3 to 0.2 percent were obtainable with ammonium sulfate. However, the system requires concentrate roasting at temperatures of 900° C or higher, heated pulps (100° C), and large quantities of ammonium sulfate. Selective leaching was obtained using S02 gas in an aqueous concentrate slurry. Magnesium oxide content was reduced to less than 0.1 percent without loss of phosphate.
Citation
APA:
(1970) RI 7362 Removal Of Magnesium Impurities From Phosphate Rock ConcentratesMLA: RI 7362 Removal Of Magnesium Impurities From Phosphate Rock Concentrates. The National Institute for Occupational Safety and Health (NIOSH), 1970.