RI 7776 Reducing Copper And Tin Impurities In Ferrous Scrap Recovered From Incinerated Municipal Refuse

The National Institute for Occupational Safety and Health (NIOSH)
L. L. Oden
Organization:
The National Institute for Occupational Safety and Health (NIOSH)
Pages:
14
File Size:
681 KB
Publication Date:
Jan 1, 1973

Abstract

The purpose of this research was to develop a method to remove copper and tin from the magnetic fraction of incinerated municipal refuse, as recovered by the Bureau of Mines pilot plant in College Park, Md. Copper, present in the scrap in a metallic form bonded to ferrous objects, was amenable to leaching in cupric ammonium carbonate solution. Copper levels in small 5-to 10-lb lots of treated scrap were reduced from the initial level, 0.5 to 0.6 pct, to 0.1 to 0.2 pct. Larger lots of scrap (100 lb) were treated less effectively because of poor contact of solution and scrap. Oxidation in the air or in aerated aqueous solution was applied to liberate tin from the dilute solid solution present on the surface of incinerated tinplate. Shredding of air-oxidized scrap or caustic leaching of scrap oxidized in solution reduced tin levels from the initial 0.25-pct level to about 0.1 pct.
Citation

APA: L. L. Oden  (1973)  RI 7776 Reducing Copper And Tin Impurities In Ferrous Scrap Recovered From Incinerated Municipal Refuse

MLA: L. L. Oden RI 7776 Reducing Copper And Tin Impurities In Ferrous Scrap Recovered From Incinerated Municipal Refuse. The National Institute for Occupational Safety and Health (NIOSH), 1973.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account