The Activity of Zinc and Lead Oxides in Lead Blast Furnace Slags
    
    - Organization:
 - The Australasian Institute of Mining and Metallurgy
 - Pages:
 - 7
 - File Size:
 - 792 KB
 - Publication Date:
 - Jan 1, 1989
 
Abstract
The reduction of zinc from lead blast furnace slags using  hydrogen was studied at 1300¦C as part of a laboratory  investigation of zinc fuming. To perform the experiments, 300 g  "spent slag" was melted in a crucible. Hydrogen was then  injected into the slag through a lance and fresh blast furnace slag  was added regularly in small quantities over a period of 40  minutes. Zinc added in the fresh slag was reduced and the zinc  level of the bulk slag attained a steady state value of between 1  and 9% after about 10 minutes, depending on the gas injection  rate. Because of the high reactivity of hydrogen, bulk supply of  hydrogen to the slag was the rate limiting step at the flow rates  used and it is believed that the gas-slag reactions in the system  were at equilibrium. A partially/stabilized zirconia cell with a  Ni/NiO reference electrode was immersed in the slags during the  experiments and the steady/state oxygen potentials of the slags  were measured. By using the experimental oxygen potential values and  calculated values of the steady state concentrations of zinc in the  offgas, the activity of ZnO in the slags was calculated from the  Gibbs's free energy change for the reaction:
Citation
APA: (1989) The Activity of Zinc and Lead Oxides in Lead Blast Furnace Slags
MLA: The Activity of Zinc and Lead Oxides in Lead Blast Furnace Slags. The Australasian Institute of Mining and Metallurgy, 1989.