The Effects of Cross Faults on the Richness of Ore

The American Institute of Mining, Metallurgical, and Petroleum Engineers
E. K. Soper
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
13
File Size:
610 KB
Publication Date:
Jan 10, 1917

Abstract

Introduction It has been observed that where veins or other types of orebodies are intersected by cross faults, the continuation of the ore deposit below the fault is often of lower grade than that portion above the dislocation.1 In some mines, the reverse of these conditions has been noted, and the richest ore is found to occur in that portion of the vein beneath the fault intersection. Such instances seem to be less frequent than those where the richest ore is above the offset. The important and widespread influence of fault and vein intersections upon the localization of ore shoots is well known 2 but the factors that govern the position of the ore shoot relative to the fault intersection seem to be less clearly understood. The richest ore may be above or below the fault,. or it may occur at-the point of intersection, or there may be no change. Recent observations made by the writer in mines in Idaho and Montana suggested a possible explanation for the changes in the richness of ore below certain types of fault intersections. These observations have been supplemented by a study of the literature containing detailed descriptions of ore deposits at a large number of mines in North America. The results of these studies are presented herewith in the hope that they may lead to further discussion of this important phase of ore deposition.
Citation

APA: E. K. Soper  (1917)  The Effects of Cross Faults on the Richness of Ore

MLA: E. K. Soper The Effects of Cross Faults on the Richness of Ore. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1917.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account