Upgrading of Phosphate Fines by Fatty Acid Flotation Using Amylase Enzyme as a Surface Modifier (Mining, Metallurgy & Exploration)

Society for Mining, Metallurgy & Exploration
A. Yehia K. E. Yassin M. Amar
Organization:
Society for Mining, Metallurgy & Exploration
Pages:
7
File Size:
723 KB
Publication Date:

Abstract

Phosphate fines (size ≤ 45 μm), from the Red Sea Region, Egypt, were subjected to beneficiation process to recover the phosphorite grains from such fines. The sample is characterized by low P2O5 content (18.78%) associated with gangue minerals such as silica (22.77% SiO2) and carbonate (2.01% MgO) indicating its low grade. Phosphate pre-concentrate was prepared by gravity separation, using Falcon, where 63.37% of the phosphate, with 24.94% P2O5, 1.46% MgO, and 10.54% SiO2, was firstly recovered reducing the mass flow to the subsequent beneficiation process. However, the gravity tailing was the feed for the reverse phosphate flotation using bench scale column flotation where oleic acid was used as a carbonate gangue collector and amylase enzyme as a phosphate depressant. Under the appropriate flotation conditions (0.1% amylase, 5·10−4 mol/dm3 oleic acid, and temp. 30 °C), phospho-concentrate assaying 0.61% MgO, 13.14% SiO2, and 27.85% P2O5 with a P2O5 recovery of 55.45%, was finally obtained without the use of expensive depressants, e.g., phosphoric acid or sodium silicate. A tentative flow sheet for the whole process was postulated.
Citation

APA: A. Yehia K. E. Yassin M. Amar  Upgrading of Phosphate Fines by Fatty Acid Flotation Using Amylase Enzyme as a Surface Modifier (Mining, Metallurgy & Exploration)

MLA: A. Yehia K. E. Yassin M. Amar Upgrading of Phosphate Fines by Fatty Acid Flotation Using Amylase Enzyme as a Surface Modifier (Mining, Metallurgy & Exploration). Society for Mining, Metallurgy & Exploration,

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account