Use Specifications For Coal (84fe2011-0c3d-42cb-9f53-0e8c6a59c568)

The American Institute of Mining, Metallurgical, and Petroleum Engineers
J. H. Kerrick J. E. Tobey David R. Mitchell
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
21
File Size:
819 KB
Publication Date:
Jan 1, 1950

Abstract

DETAILED knowledge of purchase specifications established by coal consumers is essential to the successful design and operation of a coal preparation plant. ANTHRACITE Specifications should be considered by both the consumer and the producer as guide posts outlining a certain path for both to follow. Plants differ, therefore specifications must differ to meet the varied requirements. Specifications are not of themselves a "cureall" or an assurance of complete satisfaction in fuel utilization. Specifications should not be regarded as a license to engage in an orgy of buying any and all coals that may happen to fall within their limits. This would lead to the indiscriminate mixing of coals which may vary in their burning characteristics. Different coals of equal grade tend to be individualistic in their burning characteristics. Rather, specifications should be used to help simplify coal selection, to reduce the actual number of coals used over a given period; in other words, to have a stabilizing influence on coal or customer turnover. In the final analysis, the use of too many coals per year in a plant is costly to both the consumer and the producer. Too many sources usually result in higher operating and maintenance costs for the consumer and higher sales costs for the producer. Finally, the statement included in the report accompanying the comprehensive Coal Selection Charts prepared by the Coal Committee of the National Association of Purchasing Agents, and released in 1938, is significant. This Committee worked diligently for a period of 15 years seeking to find a scientific and reliable method for selecting coals. The two following paragraphs are quoted from its report: More important is the fact that no ready-made classification or set of specifications can possibly replace the judgment and resourcefulness of an experienced combustion engineer or fuel technologist, nor the usual need for full scale plant tests under the exact conditions of use before a final decision is made.
Citation

APA: J. H. Kerrick J. E. Tobey David R. Mitchell  (1950)  Use Specifications For Coal (84fe2011-0c3d-42cb-9f53-0e8c6a59c568)

MLA: J. H. Kerrick J. E. Tobey David R. Mitchell Use Specifications For Coal (84fe2011-0c3d-42cb-9f53-0e8c6a59c568). The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1950.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account