Washington Paper - The Use of High Percentages of Fine Ore ill a Charcoal Blast-Furnace

The American Institute of Mining, Metallurgical, and Petroleum Engineers
Harry R. Hall
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
4
File Size:
151 KB
Publication Date:
Jan 1, 1906

Abstract

The proposition to make pig-iron from magnetic concentrates and cobbed ore with charcoal-fuel weighing from 12 to 20 lb. per bushel is, on the face of it, not inviting; but the work that has been done under these adverse conditions may be worthy of record as furnishing a comparison with coke blast-furnace practice under similar conditions.' The record of the furnace-practice is briefly summarized as follows :—the charcoal was made of hemlock, pine, spruce, balsam, maple, beech and birch woods. All the concentrates, containing from 62 to 65 per cent. of iron, would pass 1/8in. screen, of which about 34 per cent. would pass an 80-mesh screen. The cobbed ore, varying in composition from 32 to 47 per cent. of metallic iron and from 23 to 32 per cent. of silica, would pass through a 1-in. ring, and of this ore about 25 per cent. would pass a 1/8-in. screen. The furnace was blown-in October 20, 1903, with charcoal which was supposed to weigh, when dry, 18 lb. to the bushel. Some charcoal similar to this was stored in the stock-house for about a year, and was then found to weigh 12 lb. per bushel.
Citation

APA: Harry R. Hall  (1906)  Washington Paper - The Use of High Percentages of Fine Ore ill a Charcoal Blast-Furnace

MLA: Harry R. Hall Washington Paper - The Use of High Percentages of Fine Ore ill a Charcoal Blast-Furnace. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1906.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account