Waste Dump Stability at Fording Coal Limited in B.C.

- Organization:
- The American Institute of Mining, Metallurgical, and Petroleum Engineers
- Pages:
- 19
- File Size:
- 776 KB
- Publication Date:
- Jan 1, 1983
Abstract
Fording Coal Limited's mine in the Rocky Mountains near Elkford, B.C. has produced 21.8 million clean tonnes of metallurgical coal from 1971 to 1980, inclusive. This production has come from several pit areas and required the removal of 149.1 million bank cubic meters of waste rock and overburden by truck-shovel and dragline operations. Waste dumps from 30m to 200m in height have been successfully constructed on natural slopes, generally between 10° and 26°. Design considerations for the dumps include foundation and soil conditions, natural slope angles and containment of weak overburden or rehandle materials. Dump control is maintained by monitoring the crest and the face of an active dump area. Crest movement is measured by extensometers locally termed "Spoil Monitors". When crest movement rates progressively increase above normal, dumping operations are temporarily relocated. Some unstable conditions and mass failures have occurred as the result of natural foundation slopes being in excess of 26°, failure of weak water saturated foundation soils or weak material being placed on the dump.
Citation
APA:
(1983) Waste Dump Stability at Fording Coal Limited in B.C.MLA: Waste Dump Stability at Fording Coal Limited in B.C.. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1983.