Search Documents

By Parley Potter

GENTLEMEN OF THE COAL MINTING INSTITUTE: I was requested to write an article on mining a short time ago; however, the time has been so short that I have not had time to prepare an article as I would like to have presented it to this body. In writing this article it has not been my intention in making comparison of various mines, to favor one or discredit the other. I hope it will be considered in that light. The coal mining industry as I have seen it in the past, at present and in the future. In years gone by large tracts of coal land could be obtained at a very small cost, and as yet coal land may be purchased at a reasonable price in this country, but I believe the time is near at hand when the methods of mining will have to be changed greatly in this country. Many changes have taken place-in the last few years, some of them have been forced by law, others by the coal operators themselves, after being convinced that the changes made were for their own benefit. During my 20 years in the mines I have seen thousands and thousands of tons of coal lost that could have been saved if proper methods of mining had been used. The Room and Pillar system of mining coal is none. too good at its best ; a certain per cent of the coal is always lost, yet it is about the only system that can be used under certain conditions, but where the Longwall system can be used I believe it is the best system yet introduced. If the Longwall system is used' there is no coal lost. You get it all as you advance with the workings. Some coal operators object to the Longwall system for several reasons, and most of the reasons they advance are not founded on facts. For instance some of them claim it is too expensive. I will admit that the cost per ton is a little higher in Longwall than it is in Room and Pillar as a rule for the amount of coal' mined, but after the Room and Pillar mine is finished as a rule there are thousands of tons of good coal lost, for the simple reason that it cannot be mined at a profit. In many cases if the same mine had been operated on the Longwall system every ton of saleable coal could have been mined at a fair profit, and in the long run would have netted the owner much more money than it did under the Room and Pillar system. The Longwall system has been in operation many years in Europe and especially Great Britain, and is the most approved of systems in many countries at the present time. Millions of tons of coal have been saved by its use in those countries. It is claimed that the Armour Packing Company loses nothing but the squeal of the hog when it is killed, and doesn't allow it to squeal much. Why lose coal if the Longwall system of mining will save it? The Longwall mine is far more easy to ventilate than the Room and Pillar mine; the air has a much less distance to travel for the same amount of working face in Longwall than it has in the Room and Pillar.

Jan 1, 1921

The Annual Business Meeting of the members of The Rocky Mountain Coal Mining Institute held during the 83rd Regular Meeting of the Institute was called to order by the president, Bernard Bernstrom at 2:50 p.m. Tuesday, June 30, 1987 in the Janss Auditorium of the Snowmass Conference Center in Snowmass Village, Colorado. Thirty-one were present and a quorum was established. The president outlined the purpose of the meeting was to inform the members of the status of the affairs and activities of the corporation during the preceding year. It was moved by Leon Jeannot, seconded and carried to approve the minutes as published in the 1986 Proceedings. The chair called for reports of the various committees and these reports will by placed on file in the RMCMI Office. Bylaws and Resolutions. Chairman Loren V. Linville reported there were no bylaws revisions. He further reported that the Board had adopted three resolutions: (1) Noting the passing of members since the last convention-Benton Boyd, E. A. Hare, E. S. Moran, Jr. and Edward Prostel. (2) Of appreciation to the Executive Secretary, officers, chairman, Diamond Jubilee chairman and committees and convention committees for an outstanding job in preparing for the 83rd Regular Meeting of the Institute. (3) To recommend to all RMCMI members that, on an individual basis, they each oppose replacing coal fired generation with natural gas generation. Membership. Chairman Leon Jeannot reported that at the beginning of the 1986 fiscal year, there were 881 active or dues-paying members. During the year, 219 members were dropped for a variety of reasons such as non-payment of dues, transfer, employed elsewhere, change of address. Ninety-six new members have been recruited for an active total of 758. In addition there are 55 Life Members, 20 senior members, six scholarship winners and seven supporters for a net total of 846. The budget of RMCMI calls for 1,000 active members and we must address and plan for those short-term prospects as they will certainly impact our membership. A full report is on file in the RMCMI office. Patrons of the Institute. Chairman Ira McKeever reported that only 59 Patrons renewed their support during 1986-87. Program. Chairman Bill Balaz announced that the convention program theme "This is OUR Life", as presented in "Past", "Present" and "Future" segments was very well received. He called for additional helpers another year and suggested that next year's program format be changed to a hard hitting one. Publicity. Chairman Tom Egan reported that of the three newsletters sent members during the year, that the most effective one was the newspaper format one and recommended its use next year. RMCMI hired Bob Jacob who heads his own public relations firm to solicit advertising for the Proceedings on a contract/ commission basis. He attended the convention for this purpose and to solicit business card ads. A full report is on file in the RMCMI office. Scholarship. Chairman Keith McGinnis reported that five of the six scholarship recipients were present at the convention. Each was introduced to the membership at the Tuesday morning Scholarship Breakfast, presented a plaque and responded. The input from each winner was most favorable to the program. Each was appreciative of the many contacts made and the educational seminars and programs. The selection process started in March and was completed in May, except for one university which had difficulty in providing a candidate. It is suggested that the initial contact with the institutions be made in December and completed by April 1. This year, for the first time, three of the six universities were visited for the purpose of interviewing the candidates. They were Colorado, Utah and Wyoming. A very positive feedback was received from these schools and it is recommended that the practice continue. CONVENTION COMMITTEES Convention Arrangements. Doris Finnie presented the following report: As a professional meeting planner, this Diamond Jubilee convention was indeed a great challenge. One meal was added to the package and thus increased the individual cost. Snowmass Resort Association is unique in that they utilize a conference coordinator who acts as the middle man between myself and the usual persons we deal with, like AV personnel, the chef, the banquet director, the steak fry personnel, the Sunday tour etc. so the office had to become creative. For instance, we learned early on we could not deal with the local florists. It cost us lots less to buy our flowers wholesale in Denver, have my husband drive them up and our West Virginia daughter to arrange them! But, finally her floral arrangement class at CSU paid off! This was truly a Finnie family orchestrated convention. Our Lakewood daughter acted as Scholar-

Jan 1, 1987

of our good friends and fellow members: W. S. Worthington H. W. Bullock who left the world better for their having lived in it.

Jan 1, 1932

By I. N. Bayless

The subject of Premium Payments for Mechanical Loading was given consideration by the management, having in mind they would prove an incentive for increasing the tons per man shift, make for a lower production cost and allow the ambitious workman an opportunity to augment his earnings over the regular day wage rate, a standard of performance having been established by the operator which would be expected from the employee. Any performance above the standard is looked upon as a saving to the operator of which the employe benefited to the extent of receiving a certain percentage of the saving effected. The premium must be high enough to be worth while to the employee and low enough to in¬sure a saving to the employer. This method of sharing tends to pay men in accordance with their ability and effort. One of the principal advantages of this method of sharing is that a better class of labor may be attracted. Greater earnings furnish an incentive to increased tonnage. Workmen who prove themselves aggressive are readily noticed by supervisors, and, by shifting men to different places and to different working conditions, the crews are made more efficient and the inefficient workmen may be singled out and eliminated, thus permitting better results and better operation of the mechanical loading equipment. This is also evidenced by the fact that men become their own competitors, also working in competition with other crews. In order to do this, without neglect to the care and protection of the loading machines, men are educated to the proper handling and care of the machinery, keeping it in shape and everything clean in general, which has shown good results.

Jan 1, 1932

By David Griffiths

I am not an orator and have never said a word in public during my thirty years' experience in the coal mines of Colorado; but, being requested to speak by our worthy chairman, and as I am deeply interested in the future welfare of this organization, 1 will make an effort to say a few words in behalf of the Rocky Mountain Coal-Mining Institute, which we are about to organize. As 1 understand it, it is the object and intent of this organization not merely to assemble occasionally for the purpose of discussing various problems in coal-mining, and thus to obtain the best possible results in economic operations, but its especial duty will be to devise ways and means whereby accidents in coal mines will be minimized. Figuratively speaking. we are about to plant a tree in the State House of Colorado, and desire its roots and branches to extend over Wyoming on the north, New Mexico on the south. and Utah on the west. So we expect this tree to bear fruit over a vast area. We must remember that the planting of a tree, even in good soil, is useless unless we cultivate, prune, and nurture its development. If we will not do so, the tree will not bear the desired fruit. So, in order to make the Rocky Mountain Institute a success, we must not only start it off in good shape, but we must keep on adding to its strength in various ways, so that it will become a known factor and a recognized power over this broad territory. In other coal-mining states and countries of the world much has been accomplished through similar organizations to reduce loss of life among men engaged in the production of coal, and there is no reason why our institute in the West should not be equally useful and attain the same results. There are many ways by which this organization can be made beneficial to the men engaged, in various capacities, in handling the "dusky diamond." I will endeavor to confine my brief remarks to the necessity of a crusade of an educational nature among three classes of men that are directly and indirectly connected with coal mines. First-We need to educate ouselves. It is amazing how few of our number, holding positions of trust, and having charge of men in and around coal mines, are conversant with our brief mining laws and cognizant of our duties in enforcing them. Going down the line to our company men and miners, I think 1 can safely say that not over 5 per cent of them are in any way familiar with the statutes that have been enacted for their especial benefit and protection. This condition, 1 think, can be, and ought to be, remedied, and. if thoroughly done, the effect in reducing loss of life will soon become apparent. Now, to reach the officers or men in charge I consider an easy matter, which could be accomplished in this manner: Have our general managers or owners of coal properties issue a circular, compelling every superintendent pit boss, fire boss, or other officer having charge of men, to send them a copy of the mining law in their own handwriting every six months. But to come to the masses engaged in coal-mining. to get these men of various nationalities educated in the mining law, will be a difficult task indeed; but I think I have an original scheme that is practical, and which, if put in operation, would work wonders in educating our company men and miners. This plan is as follows: Have every school in every coal-mining district devote one-half hour on Friday afternoon after school hours to the familiarizing of all male pupils between the ages of twelve and sixteen years with the contents of our laws governing coal mines. At the end of each term of school, award small prizes- say, $5, $3, and $2- to those that are best posted, the principal of the school to be the sole adjudicator. Now, someone may say that this is causing extra work to our teachers, with no compensation. In this respect, I will vouch that 95 percent of our teachers will do this work gratis, providing we can show them the benefit of the system. If we go a step farther, and put an incentive before our teachers, probably it would be a good scheme to award a prize-say, $20 or more-for the best set of practical amendments to our mining laws complied by any school and its teachers, judges of the amendment to be members of this Institute and appointed by the President. There is no denying the fact that we need to be educated, and that we should adopt some system that will encourage a knowledge of practical and scientific mining amoung our present forces and the rising generation. Newspaper Men Need Educating Second-Our reporters and press agents need to

Jan 1, 1987

PRESIDENT MOSES: Mr. Hall, can you tell us something that will help our cause? R. DAWSON HALL: I did not want to tell anything; I wanted rather to say something, if. I said anything at all, about my impressions regarding the safety of the mines in the West. We heard yesterday how terribly dangerous they were, and I think that is due to the natural conditions. It is interesting to note that many of the developments of safety, which you will find all through the country, had their origin here in the Rocky Mountain States. It has not been because the Rocky Mountain States have been negligent - though, of course, they could have been more active - but it is becaues the conditions have been such as to make accidents more numerous. Rock dusting by mechanical means was used here before any other country adopted it, let alone the United States. It is true that rock dusting was started in England; but it was by hand, as it remained with the Victor -American Fuel Company to be the first to distribute rock dust by machines, and that is to the credit of Mr. Murray, who was the man that did the original dusting in those mines. It was at Delagua, they put up shelving and put dust on it; they used the adobe, and Mr. Pryde, at Reliance, very early in the game, put dust in the Reliance Mines, and some of the dust, I believe, is there yet but they can hardly find it for the new dust. That is not all. I believe it was first in the Utah Fuel Company's mine that incombustible clay was used for stemming, and in the East, where we were in the habit of using slack entirely, that was a big advantage. Another thing that the West has originated has been the wetting of the chain in cutting. The people in Alabama took a great deal of credit for having used that very early, but not as early as Mr. Brennan did at the Hanna Mine, he having used water on the cutter bits in 1913. Another development was that the Phelps Dodge Corporation were the first people to use, I believe in the United States, storage battery locomotives for main haulage, and while they didn't go ahead with that, so far as putting in power trucks and mining machines, until just recently-I think the Consolidation Coal Company in the East managed to get ahead of them in that development,-notwith-standing, they were the earliest to use it for main haulage. When I came through this section of the country, in 1912, I think it was, I went through the mines of the Union Pacific Coal Company. I was surprised to see the extent to which fire-proofing had been carried out in that mine, with regard to non-combustible brattices and overcasts, which were of concrete; even the boxes were covered with sheet metal. They were very far ahad of us in that respect; far, far ahead of us in the East, because the East has its favorable conditions in the fact that most of the lump in the mines is more or less wet all the time. Another safety provision which has been taken by the Utah Fuel Company, was shooting from the surface. That has not spread very much in the, East, but it has been used in Oklahoma and the middle West. I think there is plenty of evidence that the Western people have been thinking for themselves, in going ahead and' establishing new standards in Safety. One of the most unusual things is this Safety Committee, permanent Safety Committee of the Rocky Mountain Coal Mining Institute, which has been endeavoring here to find out the conditions under which safety cant best be practiced. I think it is those who venture to. criticize the West that) have to show that in the East there is not the spirit which has led the Rocky Mountain region to endeavor to reduce its very terrible death rate that really exists. It has to be faced and it furnishes a cause, an incentive; for further work toward safety; but none can deny that the desire of the western mining man has been to find

Jan 1, 1926

[Participating Scholarship Colleges and Universities 136 Big Sky Coal Company 111 Canyon Fuel Company LLC 97 Coal Age Magazine 109 Commercial Testing & Eng. Co 99 Continental Conveyor & Equip. Co 103 Copper Mountain Resort 128 Dakota Coal Co 100 DBT America Inc 117 Empire Machinery 101 Energy West Mining Co 102]

Jan 1, 2001

D. HARRINGTON: Owing to lack of funds, the United States Bureau of Mines have made no experiments in the Bruceton mines in the use of mudite. MR. McAULIFFE: I doubt that mudite cam be delivered at fifty cents a ton and that a mile of heading can be treated with mudite for ten dollars. You could not dig a ton of sand out of a sand hank for that money. L. C. CLARE: The tram road leading to Wattis mine crosses a shale bed and it is easy to screen the shale through a %-inch sieve and load it into a mine car. W. J. REID: A slow trip passing through a mudited entry will dislodge practically no dust, a rapid trip will make air disturbance enough to coat the cars with fine dust. MR. PRYDE: We have used mudite on stoppings around a fire in Reliance and for two months thought they were getting good results, but the fire was found to be drawing air and to be spreading. This mudite was smeared over the stoppings with a trowel. After this apparently failed we used dry adobe.

Jan 1, 1925

Jan 1, 1974

Past President Ralph Moore opended the meeting at 9:30 a.m. He thanked all the committees for their part in making the 1977 meeting the success is was. He then turned the meeting over to President-elect, Shirl McArthur. President McArthur called on the Auditing Committee to present its report. Gabe Ishley, Chairman, read the report and asked that it be approved. A motion was made, seconded and carried. Loren Linville gave his report on registration and new members which figures are in the Monday a.m. business meeting of the Proceedings. The Resolutions Committee was asked to give its report. William Bear, Chairman, submitted the following: (1) RESOLVED: WHEREAS, in the year since the last convention of The Rocky Mountain Coal Mining Institute, the Institute and the coal mining industry have suffered the loss through death of the services of: John A. Garcia John B. Huehes H. B. Lindeman Richard B. Miller Charles Pliley Wilford Ruff James Westfield

Jan 1, 1977

By Steve Leer

Pick then introduced the convention keynote speaker, Steven Leer, President and Chief Executive Officer of Arch Coal. Following the morning coffee break, Pick introduced Howard Goodman to present the Fourth Annual Safety Awards. [ ]

Jan 1, 2001

Public perceptions about coal remain neutral to negative But gains are slowly being made as the public becomes more aware of coal as ?abundant, affordable, and increasingly clean?

Jan 1, 2006

[Page Minutes 5 Present Status of Petroleum Industry 9 F. M. Van Tuyl. Developments Along the Line of Low Heat, Carbonization 13 A. C. Watts. Uses for Fine and Pulverized Coal 14 C. A. Allen. Have Mining Engineers Accepted All That Developments in Machinery Apply? 16 R. Dawson Hall. Coal Mine , Accidents and State Mining Law 23 D. Harrington. Harmony and Co-Operation 26 H. F. Nash. Personal Dangers 28 John Bevan. Methods of Improving Safety and Health Conditions 29 C. A. Allen and A. L. Murray. The Economic Relation of Accidents and Preventable Diseases to the Coal Mining Industry 39 Recent Developments in the Use of Electricity in Mines 43 Graham Bright. Discussion of Graham Bright's Paper 48 Mine Safety Work at Dawson, N. M 49 W. F. Murray. Mine Safety Work 54 Eli Follett. Wire Rope in Mining Operations 56 James F. Howe. Discussion of F. E. Shepard's Address 69]

Jan 1, 1922

PRESIDENT BOTTOMLEY: Gentlemen, the next order of business, if you wish to discuss it is Mechanical Loading. We still have a little time left that could be devoted to that subject, and the meeting will be open now for that purpose. Where is Mr. Edge- worth? J. E. EDGEWORTH (Foreman, Union Pacific Coal Company, Rock Springs, Wyoming): Here. PRESIDENT BOTTOMLEY: Yon start the ball rolling. Tell us what you are doing in the Rock Springs District, on the mechanical loading. SECRETARY SHURART Mr. Edgeworth is the man at the face handling the coal. He never sees the light of day these late winter mornings.

Jan 1, 1927

Jan 1, 1924

SECRETARY SHUBART: This letter will not surprise you. (Reads) UNITED STATES DEPARTMENT OF COMMERCE Bureau of Mines Washington Sept. 4, 192G. Benedict Shubart, Secy, Rocky Mountain Coal Mining Institute. Denver, Colo. Dear Sir: "Sorry not to be able to be with you but since my function in the Institute has been largely along the line of `stirrer up of trouble' (of course always with the aid of Dalrymple), I do not wish to fall from grace now so am sending you a pamphlet on the last page of which is a' tabulation as to accident indices of various coal mining states and it seems to indicate that the states comprising the Rocky Mountain Institute have the poorest accident record of all the states producing coal. "It seems to me that even allowing for possible deficiencies in connection with placing accidents upon basis of hours of exposure, our western states need to `tighten up' as to safety practices, hence I hope that the Safety Committee report will be both drastic and progressive and that western coal mines apply the drastic proposals in addition to approving them as the policy of the Institute. Why wouldn't it be advisable to have a committee appointed to ascertain why the safety record of the states comprising the Institute is so bad as to coal mines? Wishing the Institute all kinds of success." (Signed) D. HARRINGTON. SECRETARY SHUBART: He encloses this pamphlet issued by the Bureau of Mines. On the back of it is this table; and it is a fact that the Rocky Mountain States are down at the lowest in almost every case, at the lowest point, with the highest accident rate in almost every kind of accident. Maybe he is wrong; maybe he states this for reasons. That is a rotten looking table for us.

Jan 1, 1926

Jan 1, 1957

will be held at COSMOPOLITAN HOTEL DENVER COLORADO June 3,4,5, 1931

Jan 1, 1930

CHAIRMAN LITTLEJOHN: Some of the members will want to question Mr. Farnham on some of the things he has brought tip, so we will throw the meeting open for discussion. I am quite sure Mr. Farnham will be willing and glad to answer any questions that may be put to him. MR. HOLMAN: I would like to ask Mr. Farnham a question in regard to the Duckbill: How wide a face will it operate without moving the bill? MR. FARNHAM: The Duckbill is a device that was developed in the Union Pacific Mine at Rock Springs, within the last few months, and it is shaped something like, a dustpan, with discharge throat in the rear. They made one seven feet wide and found it was too wide, and the one they are using now is between three and four feet in width. The front section of the conveyor, which attaches to the duckbill, meshes into it to form a sliding section, and the front end of the Duckbill is pushed by the upper segments. I saw one used in a room twenty-four feet wide, and they drew it back after they cleaned out one room and pushed it forward again. MR. HOLMAN: You have no arrangement other than ratchet work? MR. FARNHAM: The ratchet is for forward working and back; the sections are made 12 or 13 feet long, and the stroke of the conveyor automatically works the ratchet; they can ratchet it back; it is a hand device. MR. HOLMAN: They just swing the end of the conveyor across the face to pick up the loose coal? MR. FARNHAM: Yes; they are also planning to use it endwise along the panel face, that and the room work both are quite new in their application, and I do not think the Union Pacific is giving out any results as yet, because the system has not been in use long. MR. HOLMAN: We are planning on putting one in very shortly. MR. HALL: I understand they can swing it over 30 degrees one way or the other, and it goes the same way easily because of the continual jar of the back and forward motion on a 60-degree swing. SECRETARY SHUBART: Take on a comparatively long conveyor, you can get quite a sweep, a large part of the circle. The Duckbill could command quite a large range. For a 12-foot entry, take a four-foot wide advance through the middle of the shot coal, with a 12-foot advance, ratchet back, swing the Duckbill to the rib and repeat; but I do not think they could get as much as 60 degree. on the end of the Duckbill without curving further back. The conveyor is light and not normally set on any permanent foundation. I saw one of Mr. McCarty's first machines, a rather rudimentary one, clean tip a 12-trot entry, 21 tons of coal, in 16 minutes, three men at the face and one at the loading end. MR. FARNHAM: The average time to clean the entries is about an hour-to clean up good-it wouldn't take but a short time; that is why they get this record of several cuts a shift. CHAIRMAN LITTLEJOHN: Are there any other questions you would like to ask Mr. Farnham? MR. HOLMAN: We were discussing this entry driving in regard to the entry loader; an entry loader in advance work, just what you have to do to place the jackbars with the sheave-blocks? Do you dig along the ribs after the coal is shot or do you have any other scheme that could be worked out to a good advantage? MR. FARNHAM: This record is a report I have just received from our Chicago office, without the full details, which I have written for. I am sorry I cannot give you the details. This was an Indiana or Pennsylvania mine, near Pocahontas, not the one where they had an accident. I assume they set the jacks ahead and swung and dumped the coal partly out with a scoop and partly by hand, but the application for that for entry driving is entirely new. The reports stated that they anticipated using that as a standard method of entry driving in the future. I will be glad to see that you get a copy of it when I get the report completed. MR. MONAY: Mr. Shubart, did you say they loaded 12 tons in 16 minutes? SECRETARY SHUBART: Twenty-one tons. MR. MONAY: How long did it take to change the machinery out of there

Jan 1, 1926

MR. SHUBART: Mr. Miller's paper mentioned the two processes that seemed to be a success, the Smith process and the Piron process. I suppose the main difference is this, that Smith's process is to furnish domestic fuel and the by-products while the Piron process that Ford is installing is for fuel for power plants. I would like to ask Mr. Miller something about the commercial cost of the process. With the briquette you must make it cheap enough to sell. What are the commercial possibilities of Smith's briquette? MR. MILLER: It is pretty hard to say what the cost would be at this time, owing to the fact that slack has advanced double, or even more at the time I was in New York with the plant, but at that time it was costing $1.10 for the operation. You can add to that, of course, the cost of the coke. One dollar and ten cents was the entire cost of plant operation. It takes about one and one-half tons of coal to make a ton of briquettes. One dollar and ten cents takes care of all the material, cost, labor, handling, etc. Labor was much cheaper then. I would say it would cost about $2.20 now. The cost of coal is what you can buy it for on the market. I don't think, however, that the carbocoal process will ever meet with any great favor for the simple reason that it is really a prepared fancy fuel. It is going to be nice for people in offices where they want a grate or for families where they want a nice clean fuel. It leaves no stain on the fingers, no odor to it. It seems in carbonizing coal we change the carbon molecule. For instance, we are all familiar with the diamond. It is carbon, yet it requires a tremendous heat to burn a common little diamond. But you can set a piece of charcoal afire, which is also carbon, with a match. The molecular form has been changed in carbonizing coal, i. e., it is larger. Carbocoal will fire very readily, it can be started with a piece' of paper. I think the Piron process will be the process, i. e., to simply take out the tars and light oils, then fire direct-have the distillate plants right on the job. CHAIR: Can Mr. Shubart tell us something of the mechanical part of the Piron process? MR. SHUBART: The Piron process is of interest because Mr. Ford is taking it up. He has made so few mechanical mistakes it makes us feel that it is a success. Piron is a chemist of high accomplishment and reputation. The thing about the proces is its simplicity. Mr. Smith's is a very elaborate process, but Piron has gotten around all that. Piron feeds the raw coal in at about one-half inch mesh or smaller. He feeds it into a retort about 55 feet long, 16 feet wide over all. He has a hearth about 6 feet wide and the length of the retort. The base of the hearth that carries the coal is a conveyor, a flat cast iron conveyor, a very massive affair, very accurately made, so that there is no loss of coal. Between the upper and lower strands of the ' conveyor is a bath of molten lead which gives an accurate control of temperature. For best results he must have temperature of not under 800 F., not over 1,300 degrees F., about 1,100 or 1,200 F. seems to be ideal for getting greatest yield of oils and the best tars and other by-products. This lead bath has a system of flues running through it that

Jan 1, 1923