Search Documents

By S. Rajendran

Much advance has been made in offshore hydrocarbon exploration and exploitation in India. But the same amount of success could not be achieved in the case of other offshore minerals which are amenable for mining. However, employing present technology, there should not be any difficulty in successful exploitation with minimum environmental hazards. A demonstration is provided by considering the conditions prevailing in the Kerala offshore (southwest coast of India) scenario of monazite, ilmenite, phosphatic mud and calcareous deposits. Mud banks are unique phenomenon of the Kerala coast during monsoon season. Acting as barriers to waves, mud banks protect portions of the beaches from being eroded and trap sediments from either side facilitating growth of adjacent beach. The easy minable possibilities of the phosphatic mud during non-monsoon season with less pollution hazards and dumping back the waste material after processing for phosphate at the breaker zones to reduce the erosional effects on the coast make the exploitation economic and ecofriendly unlike the benefication of the lowgrade phosphate ores on land on a comparatively larger area and subsequent crushing, transport and resulting pollution.

Jan 1, 1993

Massive sulfides discovered in 1991 and further explored in 1993 in the eastern Manus back-arc basin, north of Papua New Guinea, represent one of the few modem seafloor occurrences known to he associated solely with highly siliceous volcanic rocks. As such they are very close analogs of ancient volcanogenic massive sulfide (VMS) ore deposits, and hence an excellent natural laboratory for developing new approaches for land-based VMS exploration. The Manus Basin lies between the active New Britain subduction zone and volcanic arc to its south and the opposed inactive Manus subduction trench to its north. It is being extended in a complex pattern of short neovolcanic zones and oblique transform faults. In its western sector, relatively mature back-arc spreading has created predominantly basaltic segments with characteristics and mineralization generally similar to those of mid- ocean ridges. At its far east, however, the basin is distinctly immature. The East Manus Volcanic Zone lies between two members of the Manus transform set, and is an en-echelon series of neovolcanic edifices constructed on extensionally thinned island arc crust formed during the earlier manus subduction episode. Individual edifices range from predominantly basaltic to predominantly dacitic in composition. Two of the edifices are known to be hydrothermally active, and a particulate plume with unknown source occurs in the seawater column above a third.

Jan 1, 1993

By Sophia Katsouri

Hydrothermal circulation that produces sulfide deposits in the marine environment can also produce sulfide deposits in lakes. The major differences in terms of process are (1) in lakes the hydrothermal fluid is meteoric water of low salinity whereas in the marine setting it is saline and (2) the rocks that are leached of metals to produce the deposits are continental crust in one case and oceanic crust in the other. We have examined sulfides that are presently forming in two lakes ? Lake Tanganyika in east Africa and Lake Oyunuma in Hokkaido, Japan. Tanganyika is the second largest lake in the world and the second deepest rift lake, after Lake Baikal in southeastern Siberia. Two hydrothermal fields are known in its northern basin at Pemba and Cape Banza (Tiercelin et al., 1993). At Pemba, CO2 and CH4-rich, low temperature (53-88°C) hydrothermal fluids are forming decimeter-tall chimneys at 2-46 m water depth. Our microscopic and x-ray diffraction study of samples from the Pemba site reveal marcasite and pyrite to be the most common sulfides. Minor minerals include barite, hematite, bornite and chalcopyrite. Quartz and feldspar are also identified and were probably incorporated from the surrounding lake sediments. At Cape Banza, aragonite chimneys, up to 70 cm high, are venting fluids at 66-103°C.

Jan 1, 2001

By Subramanian Rajendran

Placer minerals are one of the rich natural resources readily made available primarily and broadly in the form of inland placers, beach placers and offshore placers. The exploitation of placer minerals goes back in the history for a period of time immemorial in the form of alluvial placer mining. In India only 35% of coast has been scanned for beach placer minerals. The buried inland placers and offshore placers have not been given due attention. Integrated management and sustainable development of coastal and Open Ocean including the EEZ are of great importance to us. Judicious exploitation of non-renewable mineral resources plays an increasingly important role with regard to future economic and social development. This calls for newer techniques for exploring and analyzing more the seafloor. Though India could remain in the placer mining for the last four decades through the establishment of the Indian Rare Earth in both east and west coasts, the lack of necessary dynamism to expand such industry and catch the world market points out a significant setback. It is highly essential to establish the major trends of paleo-beaches, since some of them are definite to contain highly rich heavy mineral placers comparable to the one being mined by beach scraping. Placer deposits of heavy minerals occur in discontinuous patches on the beaches along the West Coast of India. In recent years the National Institute of Oceanography, India and the Geological Survey of India attempted to invest on nearshore placer exploration by applying the integrated survey techniques.

Jan 1, 2001

By Roy Nilsen, Aravinda Perera

With the exponential growth of demand for minerals and need for diversification of supply channels, deep-sea mining is rapidly becoming inevitable. Productivity of underwater mining technology is salient to justify the deep-sea explorations. Methods for enhanced productivity of mobile mining equipment in a system level are investigated in this paper. Lessons learnt from the land-based mining has been the basis of this investigation. In general, mining productivity can be enhanced in two ways; firstly, by maximizing the amount of recovered material per unit time and secondly, by minimizing the cost of operation per unit material. Equipment that enable faster excavation, loading and transport in the seabed contributes significantly in increasing the amount of slurry per unit time. Improved mean time between failures (MTBF) of mining equipment will reduce the operational down time, thereby, contribute to maximize the amount of mined material per unit time. Several factors influence the operational cost minimization per ton of slurry. Higher efficient motor drive systems including the motor and PWM-fed inverter not only will save power but also will emit lesser heat thus the heat management can be less complex. This leads to more compact drive systems that allows higher power density, thus increased payload weight per empty vehicle weight. An energy storage method in the form of an utracapacitor in the electric drive system will also save the energy supply from the upstream.

Jan 1, 2018

By S. Kim Juniper

The discovery of chemosynthetic-based ecosystems at hydrothermal vents in the deep ocean was arguably one of the most important findings in biological science in the latter half of the 20th century. More than 100 vent fields have been documented along the 60,000 km global mid-ocean ridge system. Over 500 new animal species, over 80% of which are endemic to the vents, have been described from this environment. Unusual, highly evolved symbioses between invertebrates and chemolithautotrophic bacteria are common at vents, producing concentrations of biomass that rival the most productive ecosystems on Earth. Hydrothermal vents ecosystems, because of their very limited area and the presence of endemic species, are highly vulnerable to human disturbance. Mining for polymetallic sulphide deposits poses the greatest future physical threat to hydrothermal vents and their biological communities. However, there is more immediate concern about the impact of concentrated scientific research activities. Some sites have been revisited by several research expeditions per year for more than a decade. As vent sites become the focus of intensive, long-term research, oversight organizations are discussing mitigative measures to avoid significant loss of habitat or oversampling of populations. Canada recently became the first national jurisdiction to set aside a hydrothermal vent site as a Marine Protected Area.

Jan 1, 2001

By Takafumi Kasaya, Katz Suzuki, Yoshifumi Kawada

"INTRODUCTIONThe area beneath the seafloor preserves valuable resources that are inevitable to sustain our industrial society. Hydrocarbon resources such as petroleum and natural gases are one of the representative examples, which have been mined over a century (Brandt et al. 1998). In addition, submarine resources such as methane hydrates, ferromanganese crusts, and metal deposits of hydrothermal origin have long been known (Rona 2003; Kvenvolden and Rogers 2005), although methods of their mining have not yet been developed. All of these resources are distributed heterogeneously, and various exploration techniques have been developed and examined. The Japan Agency for Marine-Earth Science and Technology (JAMSTEC) is conducting a project on the development of exploration methods of these unexploited resources (Urabe et al. 2015; also see http://www.jamstec.go.jp/sip/images/pamphlet_e.pdf). The present study particularly focuses on our attempt on the developing an exploration method of hydrothermal ore deposits.Seafloor hydrothermal ore deposits are associated with submarine volcanoes of mid-ocean ridges, hot spots, and island arcs, and back arcs (Hannington et al. 2010). Active hydrothermal systems discharging high-temperature fluids can be detected above the seafloor as anomalies of temperature, turbidity, and acoustic impedance (e.g. Kasaya et al. 2015). However, because of the temperature limitation of mining (Boschen et al. 2013), the target of mining may be extinct and probably buried. To explore buried hydrothermal ore deposits from the vast seafloor area, geophysical surveys that can obtain information below the seafloor must be required. Several techniques including magnetic, electrical, and gravitational methods have been developed (e.g. Jones 1999; Kowalczyk 2008). Although physical properties taken by these methods are sensitive to the presence of hydrothermal deposits, difficulties are sometimes encountered. For example, anomalies of magnetic susceptibility and electrical conductivity, which characterize the presence of ore deposits, may be found above non-hydrothermal bodies such as volcanic bodies and reservoirs of hydrothermal fluids (e.g. Honsho et al. 2016). Thus, combinations of multiple methods must be used to specify the existence of buried hydrothermal ore deposits"

Jan 1, 2017

By ?. V. Kabanov

n considered operation hydraulic and kinematic circuits of deep-water installation for sampling a ground from a sea-bottom are submitted. Control by setters is made remotely from a service station with the help of a system of telemechanics. Migration of apparatus along a bottom is ensured with the help of force of a response of a jet and Archimedean force. The mathematical exposition of the device composed and computer simulation is Design parameters are defined and static performances are obtained. Operation is in a stage of manufacture of working drawings. There are patents of Russia.

Jan 1, 2005

By Kyung-Ho Park

The smelting leaching process is known as one of the most favorite methods for the processing of deep-sea manganese nodules because of its smaller environmental impact and easiness of manganese recovery. The sulphuric acid pressure leaching of the matte prepared from deep-sea manganese nodules was studied to dissolve the valuable metals. Almost complete dissolution of Cu, Ni, and Co from matte was achieved under the following conditions: leaching temperature 180°C, time 4 hours, PO2 10 kgs/cm2, acid concentration 2.5% (vol/vol), pulp density 5%, ammonium sulphate 40 g/l. Under these conditions the iron concentration of leach liquor was 0.95 g/l. Optimization of leaching parameters was carried out by statistical design of experiments using 23 full factorial matrix. The linear and interaction co-efficients were evaluated for dissolution of metal values and also for iron concentration in leach liquors.

Jan 1, 2003

By Ning Yang, Sup Hong

INTRODUCTION Metal components contained in deep-seabed mineral resources are being highlighted as “energy metals”, which are widely utilized in the entire fields of energy: harvesting and generation, storage and transportation, and saving. Those are mostly trace and rare metals, and rare earth elements as well: manganese, nickel, cobalt, copper, molybdenum, tellurium, selenium, platinum, etc. Toward low carbon society, for global sustainability, the role of metals and minerals is growing up in industries of energy and transportation [1]. In this context, the production and supply of energy metals from deep seafloor have to be approached also based on sustainable development. In deep-seabed mining activity, the sustainability is focused on potential impacts on ecosystems in benthic area and water column. The environmental impacts in deep-seabed mining are caused basically by intervention in benthic zones and transportation of materials. Those are, in particular, removal of benthic habitats, generation and dispersion of sediment plumes, surface transportation of seawater and sediment, tailing from mining vessel, sound and light noises, and chemical leakage, etc. This paper is aiming at fundamental guidance towards sustainable mining of polymetallic nodules.

Jan 1, 2018

By M. Ye. Melnikov

The report is about oceanic ferromanganese crusts ? covers of iron and manganese hydroxides developed over an opened rock of seamounts and rises. Ore bed parameters of crusts are understandable as their thickness and content of main economic components ? manganese, cobalt and nickel. All known results of research activity on ferromanganese manganese crusts point to that crust are characterized by notable variability of thicknesses and composition. It is possible to separate few levels of variability. The most evident is the first level of parameters variability, which is manifested in various regions of the Ocean, and connected first of all, with an age of submarine mountains, a host objects for a crusts. It was proved by many authors, that most powerful crusts are connected with submarine mountains of Cretaceous age. [1]. Crust thickness at the Magellan Seamounts reaches, for example 12-15 cm, sometimes exceeds 20-22 cm. Thicknesses of Hawaii Archipelago or Tuamotu crusts in 3-4 times less. Biostratigraphy studies of crustal sections at the Magellan Seamounts already show, that its main part started to form in the Late Paleocene. Four layers with well expressed features in structure and composition of a layer are separated in the section. From foot to top: Late Paleocene ? Early Eocene layer I-1, Middle-Late-Eocene layer I-2, Miocene layer II and Pliocene ? Quaternary layer III. Relics of more ancient Campanian ? Maastrichtian ore layer [2, 4] were discovered. It is evident for example, that Oligocene mountains could not be a host for two lower layers in the crust section.

Jan 1, 2010

By M. Ye. Melnikov

The report is about oceanic ferromanganese crusts ? covers of iron and manganese hydroxides developed over an opened rock of seamounts and rises. Ore bed parameters of crusts are understandable as their thickness and content of main economic components ? manganese, cobalt and nickel. All known results of research activity on ferromanganese manganese crusts point to that crust are characterized by notable variability of thicknesses and composition. It is possible to separate few levels of variability. The most evident is the first level of parameters variability, which is manifested in various regions of the Ocean, and connected first of all, with an age of submarine mountains, a host objects for a crusts. It was proved by many authors, that most powerful crusts are connected with submarine mountains of Cretaceous age. [1]. Crust thickness at the Magellan Seamounts reaches, for example 12-15 cm, sometimes exceeds 20-22 cm. Thicknesses of Hawaii Archipelago or Tuamotu crusts in 3-4 times less. Biostratigraphy studies of crustal sections at the Magellan Seamounts already show, that its main part started to form in the Late Paleocene. Four layers with well expressed features in structure and composition of a layer are separated in the section. From foot to top: Late Paleocene ? Early Eocene layer I-1, Middle-Late-Eocene layer I-2, Miocene layer II and Pliocene ? Quaternary layer III. Relics of more ancient Campanian ? Maastrichtian ore layer [2, 4] were discovered. It is evident for example, that Oligocene mountains could not be a host for two lower layers in the crust section.

Jan 1, 2010

By C. W. Devey, K. S. Lackschewitz

The mineralogy and geochemistry of hydrothermally altered wall rocks from different modern basaltic- and felsic-hosted hydrothermal fields at seafloor spreading centers and convergent margins have been studied to determine the characteristics of different types of alteration and to calculate the magnitudes of elemental exchanges between seawater and wall rock.

Aug 24, 2006

By Masaru Nakamizu, Tetsuya Fujii, Tatsuo Saeki, Ken-ichi Yokoi

Methane hydrate, a solid compound formed from methane and water, occurs naturally in permafrost regions on-land and in deep continental slopes offshore and has been examined as future energy resources. The existence of methane hydrate in the eastern Nankai Trough region, offshore Japan, was confirmed by drilling the MITI well “Nankai Trough” in 1999. Aiming commercialization of methane hydrate production, the Research Consortium for Methane Hydrate Resources in Japan (MH21, core associations: JOGMEC[*1], AIST[*2] and ENNA[*3]) under METI [*4] has been executing geological and geophysical surveys around the eastern Nankai Trough since 2001 as a nation project.

By Tetsuo Yamazaki

Deep-sea rare-earth element-rich mud (REE Mud) distributes in pelagic clayey sediment column on ocean seafloor at 4,000-6,000 m deep. The thickness ranges 5-80 m and the burial depth 0-100 m. The REE content ranges 600-2,250 ppm in Pacific and one of the richest, maximum 6,500ppm, has been found in Marcus Is. exclusive economic zone. By applying a conventional hydraulic excavation and lifting methods, the economy of REE Mud mining around Marcus Is. is preliminary examined. Because the waste content in REE Mud is high and the disposal cost in Japan is very expensive, the mining is recognized far away from economy.

Sep 14, 2011

By Michael Johnston

Nautilus Minerals is exploring for high-grade gold, silver, copper, and zinc-rich submarine massive sulphide deposits (SMS) within the territorial waters of the sovereign state of Papua New Guinea. Work to date has shown that these systems contain spectacularly high metal grades. To date a total of 88 surface sulphide grab samples have been collected from Nautilus’ Solwara 1 Prospect within EL 1196 in the Manus Basin, returning average grades of 15.5 g/t gold, 191g/t silver, 10.8% copper, and 4.7% Zn. Drilling in January/February 2006 confirmed the presence of this high grade system, with sulphide intersections up to 19m below the sea floor, with a best intersection of 11.6m at 9.1 g/t Au and 13.1% Cu.

By Hjalmar Thiel

Issues of deep-seabed mining are discussed since four decades and extensive efforts have been invested in oceanographic studies related to environmentally sound harvesting of polymetallic nodules. Because mining on the deep seafloor seems to range from large-scale, two-dimensional dredging or scooping up of the ore from the uppermost surface sediment layer to more localized drilling or deeper digging into a three-dimensional ore body, it appears to be justified to reconsider some concepts for environmental impact evaluation. Based on the experience gained during preceding years in environmental studies related to polymetallic nodule mining, some interrelated hypotheses and proposals will be presented. It is suggested that these proposals be considered in future plans for environmental impact evaluation and that observations on community re-establishment be conducted before massive sulphide mining or other ore extractions enter the commercial mining phase.

Aug 24, 2006

By Ivo Dreiseitl

The interaction between nodule harvester and eupelagic sediment on the seabed is definitely one of the key aspects of mining technology for polymetallic nodules which is to be studied in details. Physical properties of sediments play major role for evaluation of protection and preservation of marine environment while strength properties of sediments will come in useful for future mining operations. Cone penetration test (CPT) used for testing in situ is one of methods for investigation strength properties of sediments. The testing apparatus for CPT consists of an instrumented cone having a tip facing down and it is mounted on special underwater equipment (rus. UGI-1). UGI-1 can determine subsurface strength down to the depth interval 0 ? 1.10 m. Special IOM geotechnical cruise was accomplished in 1989 on board R/V Academic A. Karpinski within the extra test area of about 1000 km2. Thanks to UGI-1 the IOM database recorded unique strength sediment data (cone penetration resistance) from 279 seabed points of sounding at profiles 125.6 km long. Up to 35 strength data from depth interval 0-1.1m (every 3cm) were obtained from any particular testing point. As a result 279 strength charts could be plotted (two examples in Figure 1). The cone penetration resistance values can be correlated to shear strength parameters.

Jan 1, 2011

By U. Schwarz-Schampera, C. Rühlemann, H. -R. Kudrass

Within 2006 BGR will conclude a contract with the UN International Seabed Authority (ISA) for the exploration of polymetallic nodules. The contract covers an area in the Pacific nodule belt between the Clarion and Clipperton fracture zones, that which is about 75.000 km2 in size at water depths between 4200 and 5000 m (see Fig. 1). Up to now, 7 consortia or state parties have acquired similar exploration “licenses” for polymetallic nodules in the central Pacific Ocean and the Indian Ocean. These licenses of the UN authority are required according to the UN convention on the law of the sea (UNCLOS) as the areas of interest are located outside of national EEZs. The “licenses” then reserve exclusive rights to the applicant for a time span of about 15 years.

Aug 24, 2006

By Wonn Soh

As for Earth, where human beings live, approximately 70 % of its surface is covered by oceans. Today, advanced technology has led us to understanding the abyssal ocean floor through the use of submersibles and ROVs (remotely operated vehicles) for the last 30 years. Furthermore, the oceanic crust beneath the abyssal floor still remains an unexplored scientific frontier due to the lack of a direct approach. Exploration of this frontier is required to enhance our understanding of the mechanism of the M.8 class plate-subduction-type earthquake, of generation of the big tsunami, that caused the disaster, and of the paleo-global environmental change as well as of the origin of life as viewed in deep water thermal vents.