Search Documents

By Derek V. Ellis

Sediment Quality Guidelines can provide target values that should not be exceeded when seabed deposits are disturbed for mining, waste discharge or other purposes. Three sets of Guidelines have appeared in 1994 and 1995: US NOAA (updated from 1991), Environment Canada (EnvCan) and Equilibrium Partitioning (EqP) developed in the UK from US Water Quality Criteria. The US NOAA and EnvCan Guidelines have been developed by comparing many experimental and site data sets, and have concluded that levels below which effects rarely occur, or above which probably will occur, are useful guidelines. US NOAA uses the terms ERL and ERM for these two levels, and EnvCan TEL and PEL. The EqP concept is that a value can be calculated below which trace metals present cannot raise the concentration in the interstitial water. There are some problems in comparing units, but the comparison shows in general that the EnvCan levels are less than, and down to half of, the US NOAA levels. EqP levels vary but are generally fairly close to US NOAA ERL levels, with one major exception. The EqP level for mercury is far lower than either US NOAAor EnvCan levels, at 0.008 mg kg-1 compared to 0.15 (ERL) and 0.13 (TEL) mg kg-1 respectively. Comments will be solicited on how such differing Guidelines should be used site-specifically for environmental management at mining operations, (1) in the regions for where they were developed, and (2) elsewhere.

Jan 1, 1995

By Tobias Hens, Andrew Frierdich, Barbara Etschmann, Joël Brugger, Barrie Bolton

"Ferromanganese (Fe-Mn) nodules and crusts are prime targets for future deep-sea mining ventures due to their unusual enrichment of critical metals, such as Ni, Co, Cu, Ti, Te, Zr, Hf, Nb, Y, and REE. These metals are used in an ever increasing variety of high- and green-tech applications such as alloys, batteries for hybrid cars, fiber-optic cables, or liquid-crystal displays.1 Recovery and processing of these deposits will most likely be cost-intensive and require new solutions.2 Thus, innovative approaches towards the development of sustainable metallurgical processes represent one component that can positively affect the marine mining value chain. Dynamic mineral recrystallization of Fe- Mn oxide phases is a geochemical process that may have notable potential for future hydrometallurgical applications.Our research focuses on Mn oxides – potent trace metal scavengers with high sorptive capacity3 – and biogeochemical mechanisms that control Fe-Mn nodule and crust formation, alteration, and trace element enrichment. Biogeochemical redox cycling of Mn is characterized by microbial oxidation of aqueous Mn(II) to Mn(III,IV) oxides and (a)biotic reduction of these oxides to Mn(II)aq. During this cycling dissolved Mn(II) is in direct contact with solid-phase Mn(III,IV) oxides and can back-react via abiotic pathways (e.g., 4 and references therein). This results in continuous dynamic recrystallization of the Mn mineral substrate through coupled dissolution (trace metal release) – reprecipitation (trace metal incorporation) processes.4 We recently demonstrated in new experiments, that Ni is cycled during manganite recrystallization. It has been shown that, although Ni readily undergoes mineral-fluid repartitioning in the absence of Mn(II)aq, dissolved Mn(II) significantly catalyzes Ni exchange between solid phase and solution. Over a period of 50 days about 30 percent of the Ni atoms in Ni-substituted manganite (natural abundance composition) were exchanged with a 62Ni(II)aq isotope tracer at pH 7.5. Based on these outcomes we employed similar techniques to investigate the impact of dynamic recrystallization on Mn oxide phases in deep-sea ferromanganese nodules and crusts from three circum-Australian locations (South Tasman Rise, Lord Howe Rise, Coral Sea) and the Central Pacific Basin."

Jan 1, 2017

By Peter M. Herzig

In September-October 2002, shallow seafloor drilling using the 5 m-Rockdrill of the British Geological Survey and the German R/V Sonne has revealed critical information on the sub-surface nature of two distinct hydrothermal systems in the New Ireland fore-arc and the Manus Basin of Papua New Guinea. Drilling at the summit plateau of Conical Seamount (39 holes, 31 % recovery) south of Lihir Island in the central New Ireland fore-arc has confirmed the sub-seafloor extend of previously discovered surface gold mineralization (up to 230 g/t Au) and associated alteration to a depth of at least 4.5 m below the seafloor and further proven analogies to the giant Ladolam epithermal gold deposit on Lihir Island. Drill core samples of clay-silica alteration contain average gold grades up to 14.2 g/t Au over a length of about 30 cm (fire assay Lihir Gold Ltd. laboratory) and appear to be part of a more extensive gold zone located below a carapace of relatively fresh ancaramitic and trachybasalt. These samples contain a complex mineralogy including realgar, orpiment, galena, sphalerite, some chalcopyrite and pyrite, together with amorphous silica, and possibly cinnabar. In addition to high concentrations of gold, shipboard analyses indicate that the gold-rich samples contain high values of Pb, As, and Sb, which is a characteristic feature of a magmatic-hydrothermal style of mineralization and alteration.

Jan 1, 2002

By Eric J. Foell

Recognizing that the planned commercial exploitation of polymetallic nodules in the deep sea should be accompanied by environmental studies in order to protect this largest and least understood ecosystem of our planet, the German Ministry for Research and Technology has since 1989 funded a longterm and large-scale disturbance-recolonization (DISCOL) experiment in the abyssal Peru Basin of the equatorial South Pacific Ocean. The circular study site is located at 4150m depths and encompasses about 10km2 of relatively flat, heavily sedimented sea floor with low (< 15%) nodule coverage near an existing German nodule mining exploration license area. The RV SONNE, a large and well-equipped multi-purpose research vessel, served as platform for all environmental cruises conducted to date. The initial DISCOL expedition (SO-61, Feb.-March 1989) was carried out in two legs. During DISCOL 1/1, a study site was selected, a pre-disturbance baseline assessment was undertaken, and sea floor disruption was begun using the "plow-harrow", a uniquely designed disturber device towed repeatedly across the circular study area. During DISCOL 1/2, disturber deployments continued until the device had created 78 criss-crossing and partially overlapping tracks along which nodules were essentially plowed under while sediment from up to 15cm below the seabed had been turned over and exposed at the surface. In addition to the obvious within disturber track impacts, sediment mobilized by plowing drifted off with the prevailing near-bottom current and redeposited downstream, blanketing nearby areas not directly disturbed. Immediately after the disturbance phase, an initial post-impact sampling series was performed. The DISCOL Experimental Area (DEA) was revisited about six months (DISCOL 2, SO-64, Sept. 1989), three years (DISCOL 3, SO-77, Feb. 1992), and seven years (ATESEPP SO-106, Jan.-March 1996) after disturbance to collect further post-impact samples, monitor changes in the benthic community and follow the recolonization process. In addition to benthic community studies, plankton investigations were initiated during the third DISCOL cruise (SO-77) and continued during three further cruises (SO-78, SO-79 and SO-80/2) in 1992.

Jan 1, 1996

By G. Cherkashov

A new hydrothermal field with massive sulfide deposits was discovered in 2004 at 16º 38.4?N, 46º 28.5?W on the Mid-Atlantic Ridge. Hydrothermal signals had already been recorded from bottom waters and sediments in this area during cruise 19 of R/V Professor Logatchev in 2000. This site was revisited during the 24th cruise of R/V Professor Logatchev in February 2004 when samples of massive sulfides were recovered and video records of the deposits made. The basalt hosted hydrothermal field is situated at a depth of 3700-3750 m, 600 m above the inner floor on the eastern slope of the rift valley. Structurally, the new field is located at the intersection of a deep along-axis marginal fault and a transverse sub-latitudinal dislocation. Six sulfide mounds as well as associated metalliferous sediments were mapped (sampled and/or recorded by video profiling) within the hydrothermal site. The largest ore body, 500 x 225 m, in the southern part of the field consists of small blocky talus and relics of sulfide chimneys partly covered by iron oxyhydroxides. The chimneys are 1-5 m high. The southern and western boundaries of the massive sulfide deposit have not yet been delineated. More than 1,100 kg of massive sulfides and stockwork mineralization were sampled at 7 sites by dredge and TV-grab. Everywhere, iron sulfides were the principal minerals present. Pyrite in association with lesser amounts of chalcopyrite occurs in both massive sulfides and stockwork mineralization. Of particular interest is the chalcopyrite-siliceous stockwork where silicified and chalcopyritized basalts are intruded by a network of chalcopyrite veinlets. These zones could be fairly thick and enriched in base metals. Sphalerite was very rare.

Jan 1, 2004

By Michael J. Cruickshank

Marine minerals are more than an academic curiosity as they represent the most significant global source of mineral materials for economically and ecologically sustainable development for the future. Minerals research is traditionally carried out by industry and thus, in the United States at least, applied research in marine minerals may not get the share of government funding or attention that more exotic programs for space exploration or future global disasters engender. Two recent events have significantly changed the status of marine minerals. Discoveries made in the last thirty five years indicate that the potential for mineral occurrences in the oceans and seabeds, area for area, is as high as for terrestrial lands. On this basis the global mineral resource base has been recently increased by a factor of four of which three quarters is underwater. The recently enacted Law of the Sea has mandated what is probably the most far reaching re-distribution of natural resources in human history, and has resulted in a peaceful subdivision of seabed jurisdictions between the coastal nations of the world which should significantly affect future mineral markets and the balance of economic powers. Significant applied research efforts are ongoing for marine minerals as an adjunct to commercial production in southern Africa for diamonds; and in many other parts of the world for sands for beach and coastal protection. Forward planing, including research and development activities focussed on future commercial production of metalliferous oxides, continues in Korea, China, Japan, India, and with lesser activity, in the United States, United Kingdom, Germany and the CIS. Annual expenditures for this work amount to millions of dollars. In all cases the environmental aspects of commercial produc¬tion are a significant part of the research. Geologic studies on the occurence and distribution of metal sulfides at plate boundaries continue on a regional basis in the Pacific.

Jan 1, 1996

By Akira Usui

Occurrence of hydrogenetic ferromanganese crusts has been well documented over inactive seamounts in the central and southern Pacific Ocean. It has been thus believed that the hydrogenetic crusts develop preferentially at water depths between about 800 to 2500 meters. In fact, according to the Manganese Crust Database (F. Manheim, 1988), only two occurrences are known at water depths below 5000 m out of 819 occurrences cited in the database. Unexpectedly, we found typical hydrogenetic ferromanganese crusts from deep-sea floors; 1) outcropping old volcanic basement over the Philippine Sea Plate (abandoned spreading centers and subducting old oceanic crusts) and 2) one from the slope of an abyssal hill in the Central Pacific Basin (Cretaceous deep-sea basin) at water depths ranging between 5200 to 6100 meters. We report their occurrences with submersible observations from Shinkai 6K, physical parameters (such as thickness of crusts about 2-4 cm in maximum), chemical composition, petrology of substrate, and results of Be-10 dating for some samples in comparison with typical Co-rich manganese crusts from the Central Pacific seamounts. The preliminary chemical and mineralogical analyses reveal that they are of typical hydrogenetic origin, and typical of iron-manganese oxide mineral, vernadite, slow and probably continuous growth, and lower content of Co than the Central Pacific seamount crusts. The occurrences and nature of the crusts indicate that deep-sea floors are also optimal for the growth of hydrogenetic crust even at 5000 m water depth or deeper, only if oxygenated deep waters are supplied and the sea-floor morphology keeps stable enough for significant geological time period. Additional details of chemical analyses will be prepared by November and to be shown in the conference.

Jan 1, 2001

By N. J. Poll

The Zacarias gold-silver-barite deposit appears to be a Precambrian analogue of present-day exhalative deposits on the sea floor. Geochemical, stratigraphic and structural studies of the latter can be useful in elucidating the ore environment at Zacarias, thereby assisting exploration. The Zacarias mine is about 300 km north of Brasilia, within the Goiás Massif, Brazil. It is the southernmost of three auriferous quartzite occurrences along 1 km of a northeasterly striking amphibolite. Zacarias and its neighboring smaller deposit to the north, the Central Pit, contained a premining ore reserve of 650,000 tons at 4.4 g/t gold, 48 g/t silver, and about 20% barite. Gold mineralization is hosted by concordant quartzite strata also containing layered barite, pyrite, barium-mica, sphalerite, galena, chalcopyrite, magnetite, sulfosalts, free gold, and electrum. The host amphibolite is intercalated with barren mica-quartz-chlorite-pyrite schists that are more voluminous in the footwall and are associated with the ore horizons. Above the amphibolite in the hangingwall lies a thin graphitic shale, then a feldspathic arenite. The strata and regional foliation strike northeast and dip 42° northwest. Crenulation and small-scale folds plunge 30 to 40° to the west.

Jan 1, 1993

By Robert M. Owen

Recent advances in coring technology and in the development of shipboard and/or in situ geochemical geochemical analysis systems have greatly improved our ability to collect and analyze exploration samples, particularly for marine placer exploration programs. The potential benefit of these improvements cannot be fully realized, however, until we also develop more efficient methods of data reduction and interpretation. Specifically, there is a need to provide prospectors with rapid and useful interpretations of the raw geochemical data so that they can exploit promising results and otherwise optimize the exploration program while the exploration vessel is still at sea. The goal of this project has been to identify and/or develop computer software which is capable of making the necessary data reduction calculations and which can be run on conventional desk-top computers. All work on this project has been supported through a research grant from MMTC-CSD to The University of Michigan. The first stage of this effort involved an evaluation of commercially available (i.e., "off the shelf") software to determine its suitability for use in marine placer exploration applications. Various commercial software packages, each purportedly capable of making different types of statistical and/or mathematical calculations, were tested by evaluating their performance in handling geochemical data sets representative of actual marine placer locations. These data sets include the positions and results of chemical analyses of suites of sediment samples collected from areas of known or suspected marine placers along the Bering Sea coast of Alaska. The evaluation of each commercial program involved a comparison between the results obtained from using the test program

Jan 1, 1991

By Ki-Hyune Kim

The Korea Ocean Research and Development Institute conducted its first exploration for deepsea mineral resources in 1983, and began a systematic deepsea prospecting in 1989 among Micronesian islands and in central and eastern parts of Carion-Clipperton fracture zones of eastern Pacific. With the arrival of R/V Onnuri in 1992, KORDI commenced a full-scale national program for nodule exploration. The total area surveyed by KORDI covers more than 1,500,000 km2. At the end of 1993, based on the collected data, Korea designated 300,000 km2 in the Clarion-Clipperton fracture zone as prospective mining area for manganese nodules, and accordingly, the government of Korea submitted the application in January of 1994 to the United Nations for registration as a pioneer investor and for the allocation of a pioneer area. This application was approved by the General Committee of the Preparatory Commission in August 1994. As a result, Korea became the 7m pioneer investor under the United Nations Convention on the Law of the Sea. KORDI is now carrying out detailed exploration survey and environmental studies in the registered area to fulfill required obligations to UN, and Korea will continue exploring the last frontier on earth. It is KORDI&apos;s unshaken calling to be successful in exploiting deepsea resources to provide our nation resources it lacks. It is not only a challenge to explore deepsea, but it is also our national mission to explore and succeed in our endeavor for future generation.

Jan 1, 2011

By Satya Nandan

• A review of the structure and mandate of the Authority – its main functions. • The different types of mineral resources found in the deep seabed – their global distribution. • The Development of Regulations for Prospecting and Exploration of Polymetallic Nodules, Cobalt-Rich Crusts and Polymetallic Sulphides including environmental regulations and guidelines. • Early constraints for deep seabed mining – Improving conditions for mining – Future prospects for mining.

By R. Moss

Gold and silver are important byproducts of mining volcanogenic massive sulfide (VMS) deposits. Both metals occur in VMS deposits ranging in age from the Archean to the currently forming massive sulfides found on the ocean floor. The gold- and silver-rich deposits on the modern seafloor are geographically diverse and occur in several different tectonic settings (Figure 1a,b) including seamounts (e.g. Franklin Seamount, Papua New Guinea), unsedimented mid ocean ridges (e.g. TAG and Snakepit, Mid Atlantic Ridge), sedimented mid ocean ridges (e.g. Escanaba Trough) and back-arc basins (e.g. Manus Basin, Papua New Guinea). Interestingly, the most gold- and silver-rich deposits are found in the back-arc basins of the western Pacific, commonly associated with differentiated volcanic rocks such as the dacite-rhyodacite suite at PACMANUS in the eastern Manus Basin. This suggests that different, or more efficient, mechanisms are concentrating precious metals in such back-arc settings. Such mechanisms may include leaching of volcanics enriched in gold (e.g. rifted arc crust) or silver (e.g. continental crust) and/or the introduction of gold into a hydrothermal system by a magmatic fluid. The gold content of modern seafloor precipitates varies from a few ppb up to a high of 54 ppm reported from eastern Manus Basin (1). The Jade Deposit in the Okinawa Trough has the highest silver contents with values up to 1.1% (2). Both gold and silver are preferentially concentrated in late-stage, low temperature precipitates with zinc-rich assemblages being favoured in most cases. Gold is found as relatively pure native gold and sub-microscopic inclusions in gold-rich deposits, but occurs predominantly as sub-microscopic inclusions and possibly as solid solution in the gold-poor deposits (3). Silver occurs as rare silver minerals such as acanthite and native silver in the silver rich Jade deposit (2), but more commonly in the silver-containing minerals tetrahedrite and tennantite, as is the case in the PACMANUS deposit. Tetrahedrite is also known to be an important host of silver in ancient VMS deposits (4). More abundant sulfides can contribute significantly to the silver balance. In the silver-poor deposits at 21 N East Pacific Rise, silver is contained entirely within chalcopyrite, isocubanite, pyrite, marcasite, sphalerite/wurtzite and galena. In this case silver may be present as sub-microscopic inclusions of silver minerals or in solid solution.

Jan 1, 2011

By Colin Devey

As marine research scientists we especially appreciate the uniqueness and complexity of the deep-sea hydrothermal vent fauna and environments, and are particularly interested in preserving vents for their scientific, aesthetic, ecological, and potential economic values. In fact, because of the specialized nature of the equipment required to work at deep-sea hydrothermal vents, such as occupied and unoccupied research submersibles, scientists are the primary group of people who have the opportunity to visit these extraordinary environments. The potential for significant impact of scientific activities on a single vent site or a population of vent animals pales in comparison to the potential for disturbance by volcanic/tectonic events or industrial mining/harvesting activities. Nonetheless, we recognize that some scientific activities could adversely affect individual sites or impact communities more than is necessary, if research activities are not carefully planned and executed. In addition, because only a limited number of sites are currently known and scientists from a wide variety of disciplines frequently work at single locations, we recognize the potential for use conflicts among scientists, at sites where scientific activity is intense.

Aug 24, 2006

By Hjalmar Thiel

Since industry is progressing into the deep sea, marine scientists have expressed their concern about environmental disturbances which will be introduced by using the deep seafloor for mining metalliferous resources or as a repository for wastes. Environmental studies have been conducted on national levels and in bilateral or multilateral cooperation in the development of manganese nodule mining, as this is generally achieved in marine research. These investigations were partly large-scale and experimental approaches aiming at the assessment of the impacts expected to occur in commercial mining. The results elaborated till today and expected to be acquired in the foreseeable future may remain limited. Reliable impact evaluation will result from monitoring a Pilot Mining Operation (PMO). The lecture will present the broad outlines of a possible program and a preliminary calculation of approximate costs for such a combined industrial test and environmental monitoring event. Although the extent of necessary efforts for the environmental risks evaluation can only be estimated rather vaguely, it will become evident that the required human, technical, logistical, and financial resources to be mobilized will exceed industrial capacities and go beyond national funds. Therefore, such assessment of environmental risks is calling for broad international cooperation. While industrial developments for mining the deep sea will be ruled by competition or probably by restricted joint ventures, environmental care ranges outside competition and falls within the interest of all parties involved. Environmental studies, unlike technologies for the same function, do not primarily need duplication. International cooperation in PMO monitoring would equally well support all mining companies or consortia, it would minimize the efforts for all engaged in this challenging venture of deep-sea mining and it would maximize the precautionary discussion on and the care for the deep-sea environment.

Jan 1, 1994

By Andrea Koschinsky, Luise Heinrich, Stefan Gößling-Reisemann

"Germany, like several other countries, has entered a contract with the International Seabed Authority (ISA) to explore the prospects of commercial manganese nodule mining in the Clarion-Clipperton Zone (CCZ). Ensuring a maximally sustainable deep-sea mining operation requires a thorough understanding of the environmental impacts associated with every step of the mining process from the extraction of the nodules at the seafloor to the refinery on land. Against this background, the project presented here applies a combination of scenario-building and life cycle assessment (LCA) to assess and evaluate the sustainability performance of the individual process steps as well as the entire mining operation.Life cycle assessment (LCA) is a comprehensive methodological framework that allows the identification and quantification of impacts occurring during a products life-cycle, as well as the analysis and evaluation of their contribution to pre-defined impact categories, such as climate change, acidification and toxicity (Rebitzer et al., 2004). Until now, LCAs with a focus on raw material extraction have almost exclusively been applied to terrestrial processes. Noteworthy exceptions are offshore drilling, offshore wind farms and ocean fishing. Hence, the first part of the project is to investigate in how far LCA can be applied to deep-sea settings and if and in what way it could be adapted to be used in a deep-sea mining context."

Jan 1, 2017

By Arturo Carranza Edwards

One hundred ninety nine beach face sand samples from an equal number of beaches from the Mexican Pacific were studied. Based on petrological and chemical analysis some locations have been studied in more detail. Black sands from the following areas are discussed: (1) west Baja California Peninsula, where black sands rich in magnetite and ilmenite have maximum values of 50% iron and 14% titanium in the very fine sand fraction; (2) east Gulf of California, in its northern portion, the black sands show maximum values of 43% iron and 5% titanium in the fraction 2 to 4 0;-(3) the south Mexican Pacific, characterized mainly by medium sands, moderately well sorted, show that the fine sand fractions reach values of 35% iron and 41% titanium. X-ray fluorescence applied on selected samples constituted by feldsarenites and lithic feldsarenties, showed the presence of rare elements in some of the studied samples.

Jan 1, 1994

By Campbell McKenzie

Substantial consideration has been given to the implications that the morphology of the Chatham Rise deposit will have on mining operations. The glacio-tectonic processes involved in the distribution of nodules on the rise has in several areas been quite significant. The recent cruises by Chatham Rock Phosphate Limited (CRPL) have collected data which has affirmed the assumptions previously made and catered for in historic resource estimations. The deformation and displacement of the phosphorite during glacial periods and the redistribution of the mobile sand during interglacial periods is interpreted to have produced a highly variable pattern of phosphorite concentration (kg phosphorite/m2) and coverage (% phosphorite/sample weight). The phosphorite resource probably has a significant spatial variability at a scale of tens of metres. Results of recent surveys show phosphorite-rich patches alternating with phosphorite-poor areas at distances of less than 20 m. The high spatial variability of the deposit has had a bearing on how historical information for the project has been regarded and integrated with the recent exploration approach and data collection process. This coupled with the proposed extraction tool has influenced the size, nature, extent and siting of the proposed mining blocks

Sep 14, 2011

By Sang Bum Chi

In order to better predict and manage benthic disturbance by deep seabed manganese nodules mining, we needed to conduct a benthic disturbance experiment at the selected area, which has a similar environmental condition as the preservation reference area. Therefore, we have performed environmental baseline studies from 2003--not only to select the benthic environmental impact testing site but, also to detect any environmental changes before and after mining activity. Since then, a large dataset of various parameters ranging from physical (e.g. temperature, salinity, current, weather), chemical (e.g. dissolved oxygen, nutrients, dissolved and particulate organic carbon), biological (e.g. bacteria, plankton, benthos), geological (e.g. Mn-nodule abundance, sediment shear strength) and others (e.g. bathymetric profile and slope, mass flux) have been accumulated. Using this dataset, descriptive statistics and cross-correlations were performed to select the benthic environmental impact testing site. Outcome of this analysis suggests that the potential benthic impact testing site would be a rectangular-shape area (10 km × 10 km) and located at 10°27&apos;~10°33&apos;N, 131°53&apos;~131°58&apos;W, which is latitudinally the same as the preservation reference area.

Jan 1, 2011

By M. C. I. Modenesi, J. E. Smith, M. Salvá-Ramírez, G. M. Castro, J. C. Santamarina

Annual metal consumption per capita has increased several orders of magnitude worldwide since the turn of the 19th century, yet grades of terrestrial ores are decreasing as reserves dwindle. Consequently, deep sea metal deposits are gradually transitioning from identified resources to economically viable reserves. Deposits in the Red Sea deeps along the axial trough result from tectonic and local hydrothermal processes. Continental rifting and ocean floor spreading produce fresh oceanic crust; concurrently, seafloor evaporites flow into the spreading zone and form isolated deeps. The deeps are often filled with hot stratified brines maintained by locally discharged fluids during hydrothermal circulation. Metalliferous sediments precipitate from the brines within the deeps. The ongoing multipronged study at KAUST involves: (1) acoustic characterization of the metalliferous accumulations using advanced signal processing techniques that capture the physics of granular materials; (2) comprehensive mineralogical and textural characterization of sampled sediments using SEM, EDS, XRD, XRF, and ICP-OES; (3) multiphysics instruments deployed to measure undisturbed sediment properties in-situ; (4) development of a distributed seafloor observatory for monitoring field operations; (5) innovative concentration and separation technologies; and (6) new strategies for proper tailings disposal purposely conceived for the unique field conditions in the Red Sea deeps.

Jan 1, 2018

By Kioshi Mishiro, Pratima Jauhari, Walter Williams

INTRODUCTION The UN-General Assembly adopted an Agreement on 28 July 1994 entitled ‘Agreement relating to the implementation of Part XI of the United Nations Convention on the Law of the Sea ((UNCLOS) of 10 December 1982’. The Agreement came into force on 16 November 1994, and consequently, the inauguration of the International Seabed Authority (ISA, or the Authority), located in Kingston, Jamaica. The Authority is the organization through which States Parties to the Convention (168, as of 25 July 2017) shall, in accordance with the regime for the seabed and ocean floor and subsoil thereof beyond the limits of national jurisdiction (the Area) established in Part XI and the Agreement, organize and control activities in the Area, particularly with a view to administering the mineral resources of the Area. The legal regime for the administration and development of the mineral resources of the Area as it now exists are available in Part XI of the Convention1 which contains the legal framework governing “activities in the Area” and in Annex III to the Convention which contains the “Basic Conditions of Prospecting, Exploration and Exploitation” with respect to the resources of the Area2. The 1994 Agreement relating to the Implementation of Part XI of the UNCLOS is the so- called ‘parallel system’; as elaborated in article 153 of the Convention. The essential elements of the ‘parallel system’ include assured access for States parties and their nationals to seabed mineral resources along with a system of site-banking, whereby ‘reserved areas’ are set aside for the conduct of activities by the Authority through the ‘Enterprise’ itself or in association with developing States or in joint venture with the contractor who provided the particular reserved site2.

Jan 1, 2018