Search Documents

By Gao K, Wu C, Langley J. M, Waugh B, Farrell K

The dissolution of carbon from carbonaceous materials into molten iron is a key step in various ironmaking operations. For example, in new direct smelting processes, carbon in the form of coal is injected into the molten iron bath, which leads to the dissolution of carbon. In foundry operations, typical recarburizer materials can range from high purity graphite to chars. The dissolution performance of these" materials is critical to the operation and could dictate the efficiency and economics of the process.Dissolution kinetics has been studied by various investigators to explain the influence of melt conditions and carbon type (Sahajwalla et al, 1994; Shigeno, Tokuda, and Ohtani, 1985; Orsten and Oeters; 1988; Ganguly and Reid, 1992; Wright and Taylor, 1993). The influence of melt sulphur content on the dissolution kinetics has been characterised (Sahajwalla et al, 1994), with sulphur retarding the rate of carbon dissolution. The carbon dissolution from different sources is seen to vary significantly even under similar melt conditions. This observation has been explained by investigators on the basis of the varying ash content present in the carbonaceous materials. However, ash content alone cannot account for the variability in dissolution kinetics reported in other studies. One such study is presented below.In a recent study (Sahajwalla et al, 1994), pulverised carbonaceous materials were injected into the molten iron bath and the" dissolution kinetics was established. The dissolution of graphite and glassy carbon, which contain almost 100 per cent carbon, was seen to be significantly different when the molten iron contained sulphur. The influence of melt sulphur content was explained on the basis of different wetting behaviour observed.Importantly, the study showed that even pure carbon sources dissolved at significantly different rates. Hence, their performance could not be explained on the basis of ash content.The key difference between graphite and glassy carbon is in their atomic structure. Graphite is highly ordered whereas glassy carbon has relatively poor ordering in its atomic structure. This study showed that the atomic structure in carbonaceous materials can have a significant effect on their dissolution performance.The focus of the present investigation which stems from the past study described above (Sahajwalla et al, 1994), is to investigate the influence of atomic structure of carbonaceous materials on their dissolution into Fe-C-S melts.The specific objective of this study is to determine the relationship between dissolution kinetics and crystallographic character of carbon sources. In order to accomplish this goal, a range of different materials representing a spectrum of carbon sources have been chosen for the investigation. These materials include brown coal char, two types of Auscarb (A and B), and commercial graphite. Auscarb is prepared by calcining Auscoal at 1000°C. Auscoal is made from chemically cleaned Australian coals (Bowling, Chandler and Waugh, 1990). Part 1 of this paper details the dissolution performance of the materials studied, while Part 11 describes the X-ray diffraction study. The relationship between the atomic structural dimension and dissolution rate constant is discussed in light of the results obtained.

Jan 1, 1996

By J E. Everett

A block model of the orebody is used to plan a mine. The first requirement is to identify ore to be extracted, discarding waste, so as to meet target grade, generally in multiple analytes. Commonly, cut-off values are set for each analyte, so as to distinguish ore from waste. It will be shown that, if more than one analyte is important, this procedure is wasteful of ore and a composite cut-off function is preferable.A second requirement is to sequence the ore extraction so that the variability in ore grade is controlled: failure to do so will result either in low-quality ore being marketed, or excessive re-handling being required to blend the ore to reduce the grade variability.A third requirement is that the extraction sequence should be such as to control the amount of equipment movement required, enhancing the equipment productivity.The overall objective, to optimise the Net Present Value (NPV) of the mined ore, is simply stated but complex in realisation, since so many factors, such as target grade, grade variability, equipment choice, equipment movement, and downstream blending all have alternatives which can be traded off against each other, and all of which contribute to the costs and benefits making up the total NPV.There exist commercial packages for ore selection and mine planning. However, they are often of a ‘black box’ nature, and users are sometimes not fully aware of the criteria being applied. In particular, the treatment of quality as a multidimensional vector may be problematic. The purpose of this paper is to discuss some of the issues involved and to suggest an alternative set of approaches, which should complement existing commercial treatments.The discussion will be illustrated specifically by reference to the mining of iron ore, but the issues are relevant to a wide variety of mining situations

Sep 5, 2011

A case is made for broader commercial education of executive and operational managers in Australian mining companies. The competitive advantages and disadvantages of Australian miners are examined. Areas of opportunity are identified which could be exploited by broader applications of proven techniques to commercial management of mining companies.

Jan 1, 1985

Jan 1, 2004

PAPERS : 1 COMPUTER AIDED DESIGN OF MINE WATER MANAGEMENT - Z KESSERU 2 THE HYDROGEOLOGICAL PROBLEMS OF GROUNDWATER PROTECTION IN MINING REGIONS - V A MIRONENKO 3 WATER MANAGEMENT OF THE MAE MOH PROJECT -òò SIRI CHITCHOB 4 WATER MANAGEMENT AND WATER TREATMENT AT GOLDPN CROSS - M P A WILLIAMS

Jan 1, 1988

Distal rhyolitic tephras from the Taupo Volcanic Zone are widespread in the Auckland urban region. Some are primary air fall or flow deposits but most are reworked. Their presence indicates potential hazard for the Auckland urban region from future eruptions of central North Island volcanoes and associated secondary effects. Geotechnical problems occur as a result of weathering of the tephras yielding sensitive materials.

Jan 1, 1990

Chairman Bob Dennis, Ministers Frank Walker and TonyMcGrady,ActingMayor Bob Moore, other distinguished guests, fellow delegates to this Carpentaria and Mount Isa Regional Development Forum.Firstly I would like to congratulate the North West Queensland Branch of the AusIMM, and particularly its Committee, on what has been a verysuccessful Forum by any measure and for their kind invitation to me to participate in this Forum.

Jan 1, 1993

This paper shows how small calculators can be used for ball mill simulations. Two calculations are examined, the first to calculate the mill parameters and the second to predict the mill product. In the case of small programmable calculators the programs for two common models are given.

Jan 1, 1976

A/method of introducing nitrogen into alloy steels using iron and ferromanganese nitrides is considered. Data are I ded on the nitrides produced. The kinetics of the formation of the'nitride product from the reaction between or ferromanganese powder and ammonia are presented, together with an indication of the efficiency of the Reactions.

Jan 1, 1970

In his introductory remarks Mr. MacKellar referred to three types of development which may be considered to compete with mining for land use. 1. Total Development - in which he cited urban development, and intensive agriculture. 2. Partial development - in which he cited pastoral, and in this category would come National Parks. 3. Non development - in which category would fall the primitive or wilderness areas.

Jan 1, 1971

Successful restoration of Ballarat region alluvial gold workings to Box-Ironbark forest requires realistic evaluation of techniques. A stocking level threshold of 68 percent is used to rate the success of 'broadcast' seeding of E. microcarpa, E. Melliodora and E. Leucoxylon.Failure necessitates follow-up enrichment planting with tubestock, which is considered undesirable, interalia, due to pathogen, spacing and economic problems.

Jan 1, 1992

Thank you for that introduction and especially thank you to the organisers for inviting me. I've had a considerable interest in this area and I've had the advantage of an education from Neil on the subject of offering documents as a result of our collaboration together on the Securities Information Review Committee.

Jan 1, 1989

Details are given of the excellent performance, outside Australia, of steel slag in road pavement surfacing. Laboratory tests and plant trials have shown Port Kembla BOF steel slag to be a material with properties suitable for producing asphaltic concrete which will maintain a high skid resistance in service under heavy traffic. The high density of steel slag is a factor which will result in a cartage cost penalty likely to restrict usage to close to its source.

Jan 1, 1979

By Lin C, Jiaxiang D

A series of experiments were carried out with Hallimond tube in order to test the effects of different reagents. A good result has been obtained when potassium-n-butyl xanthate is used as collector for molybdenite and graphite complex are depressed by the depressor mixed with nigrosine and iron (III) chloride. The separating mechanism has been studied with help of many modem instruments.

Jan 1, 1993

Minerals are of course important to our way of living and hence the search and exploitation of minerals has always had a high priority in Australia. Metal mining commenced in South Australian in the 1840s when silver-lead and copper were first mined. This was Australia's earliest mining era and led to the rush that never ended. This and subsequent mining periods have had significant, widespread impact on local and national economic development, settlement, and social conditions.

Jan 1, 1993

By Arbuthnot IM

It is the commonly held belief that, because the separation of liquids from solids takes place considerably faster in high rate thickeners than in conventional thickeners, high rate thickeners (HRT's) must use more flocculant than conventional thickeners. Data collected from a wide range of thickener users in Australasia and data presented in the literature is analysed. In addition, pilot plant data, with direct comparisons between HRT's and conventional thickeners, is presented. It is concluded that the flocculant consumption for both thickener types is in the same range.

Jan 1, 1991

By A Struminski

The principles of occupational risk evaluation resulting from the improper ventilation of the underground mines were presented. It was shown that the risk level implies the appropriate planning and usage of prevention methods. That approach is fundamental in the ventilation, fire and climate safety management in the copper ore mines. The paper uses the adequately modified Risk Score method.

Jan 1, 2003

Evaluation of tyre chains has been taking place at King Island Scheelite for several years. Results indicate that tyre life has been greatly improved in all cases. Good cost sav- ings are resulting on small loaders. The worth of chains is difficult to prove on larger loaders under the conditions at King Island Scheelite. However, the dramatic decrease in the number of punctures has convinced the Company that chains are worthwhile on some larger loaders.

Jan 1, 1977

By McElrae AJ, McTaggart SM

The recent rapid escalation in computer use by mining companies, particularly in technical applications, can in part be traced to a growth in the availability of specialist packaged software. Such software, often developed by independent software companies provides economies of scale, end user orien- tation and breadth of scope imposed by market forces. This paper reviews the emergence of these companies and current software econo- mics before extrapolating present trends to consider the effect of future fourth gen- eration languages upon productivity.

Jan 1, 1983

By Tilyard P. A

Pasminco has tested a Valmet ES1 ceramic disc vacuum filter at its Broken Hill concentrators. On lead and, particularly, zinc concentrates at the ZC Mine the filter performed well but on North Mine lead concentrate problems were experienced with deposition on the disc, which resisted both ultrasonic and acid cleaning. A preliminary financial analysis showed that the application of the filter at the ZC concentrator was worth pursuing. Accordingly an ES30 machine has been hired for plant evaluation.

Jan 1, 1989