Search Documents

President Zakotnik opened the final session of the Institute at 9:30 a.m. Kenneth R. Herrmann of the Resolutions Committee presented the following resolutions to the group for their approval: RESOLVED: That the members of the Rocky Mountain Coal Mining Institute, in convention assembled, hereby ratify and confirm all official actions of the officers, the executive committee and other committees of the Institute between July 4, 1962, and the present time.

Jan 1, 1963

President Robert M. von Storch called the meeting to order at 9:00 A.M., and introduced the first speaker of the MANUFACTURERS' HOUR. D. M. Stromquist, Technical Representative, Coal Chemical Sales Division, United States Steel Corporation, Salt Lake City, Utah, presented a paper, "Ammonium Nitrate and Its Use as a Blasting Agent," which was illustrated with a number of slides. (See Index.) President von Storch introduced Kenneth J. MacLeod, Socony Mobil Oil Company, Denver, Colorado, who gave a short paper on "New Greases." Following are excerpts from Mr. MacLeod's talk: The recent advances in machinery, and their continuing development present a never ending challenge to the oil companies to develop new and better oils. Over the years, industry's machinery has been pressed to meet higher production rates, which has subjected the machinery to increased speeds, temperatures and pressures. Lubrications have had to be designed for a wider range of use. The entire industry has attempted to produce a good product for this extra-duty need. Most greases have contained lead in the past, and especially the food industry has had to be most careful in the use of this around food products.

Jan 1, 1958

By Christopher Blazek

Presentation Overview ?2005 Train Derailments ?BNSF Investigation and Remediation ?BNSF Test Program ?Test Results ?BNSF Dust Control Goals ?National Coal Transportation Study ?Comparison of Different Topper Agents ?What Constitutes a Topper Program

Jan 1, 2008

By Thos. A. Stroup

From time to time the question of shearing or vertical cutting of rooms and entries especially as an adjunct to the usual horizontal cuts, has cropped up in the literature of coal mining and in the discussions of mining men. Exact and definite data based an thorough tests have usually been lacking however and the present article is written to supply as far as possible this deficiency. The tests given below were made over a period of 90 days in the summer of 1921 and the object was to investigate the general .economics, if any, that might result from the introduction of vertical cutting as a standard practice into the Clear Creek mines. The machine used was the Oldroyd Universal coal cutter and comparative tests were made against the Goodman Straight- face machine and the 35 B Jeffrey Shortwall. The tests however should be held to apply only to the various methods of cutting and not as a study in the relative merits of the various machines. The first series of tests were made in the 2nd East district of No. 3 mine, where only entries were being driven at the time, the tests therefore cover only entry work. The presumption was that the entry width would be 12 feet but the oxerrun in some cases was marked enough to make the work comparable to rooms. The first test made was to determine the time necessary to shear as well as cut the places, and the results were reduced to the time necessary to cut a ton of coal. The time for shearing in the table includes the time necessary to revolve the cutter bar to the vertical position.

Jan 1, 1924

MR. LITTLEJOHN: Have you any maximum length that you make your dust barriers? What I mean by that is, your entries are 10 feet wide, and I believe if I remember right, in your single track entries you had only one dust barrier to cover the full width of the. entry in your double track entries, I believe you had two-I would like to know, have you any maximum length you make these barriers? MR. CHAS. LEGER, ROYAL FUEL CO., UTAH: It is stated that they shouldn't be over 8 feet long to obtain sensitiveness. If they make them over 8 feet they are not as sensitive as they should be. They should be made short for two reasons in order to keep the sagging out and to make them as sensitive as possible. MR. DAN HARRINGTON, U. S. BUREAU OF MINES: I didn't come here to enter into any extended discussion on rock dusting or to discuss in particular the situation at Dawson. At the February meeting at Denver, we made a complete study of this matter. Since that time a report was completed and reported to the Phelps-Dodge Corporation and Mr. Moorhead probably has a copy of it, which can give you more complete information as to what we found. We found that with the adobe dusting that they have done, they had six miles of entry pretty thoroughly dusted and of all the samples we took, at least 95 percent of them showed that not only the floor but the ribs and roof were in such a condition that an explosion could not originate in any part of this entry. In other words, this entry as it was dusted was absolutely protected from ignition and propagation. The adobe they used was of material that was non-combustible. In most instances there was not more than 3 per cent of moisture in it.

Jan 1, 1924

By Donald P. Brown

[Mr. Brown did not make his speech available for reprint.] Productivity is the Answer - Always Was; Always Will Be When Bill Balaz invited me to speak here this morning, he asked me to examine the three most important issues Consol will face over the coming decade. There are more than three. But the more I thought about that question, the more I realized all our issues come down to only one. As I reviewed the U.S. coal industry over the past ten years, and as I thought ahead into the year2000, one thing stood out. Not markets. Not government regulations. Not record tonnages. But productivity. The recent history of American coal is a tale of productivity improvement. It is a story that needs telling. And understanding. Not just for the good of the coal industry, but for the benefit of the American economy. Americans today do not appreciate the value of productivity growth. I don't say that lightly. As I review recent debate over American industrial competitiveness, as I look at certain legislative proposals, I see disturbing trends. It's not that anyone is against productivity per se. But many people seem to fear the very processes that enhance productivity. Twentieth century America enjoyed unprecedented growth in productivity. And in personal standards- of-living. Those two go together. This century has been one of change. Demographics. Education. And technology. Many new industries-cable television, computer services, telecommunications, for example-have grown from mere dreams to billion- dollar enterprises employing tens-of-thousands. And some older industries have declined. The nature of work has changed-from manual work to know- ledge work. From agriculture, to manufacturing, to services. In the mid-1960s. AT&T employed more than one million people. These were not high-paying jobs: telephone operators, linemen and equipment assemblers. Today, the successor Bell companies and their new competitors employ no more than a few hundred thousand. Because of automation. Because of enormous gains in employee productivity.

Jan 1, 1988

Oren F. Bridwell: We will close out the Institute. The President could not be here. So the Past President of the organization has been asked to take the chair. If there is no objection I will be glad to do so. We will proceed with the meeting. It seems to me we have a quorum. Minutes of last year's meetings are published in the Proceedings. If there is no objection we will dispense with the reading of the minutes. There being none we will dispense with the minutes. The Nominating Committee made its re- port last night. (See list of officers in front of Proceeding.) I move the nominations be closed. Mr. Bridwell: You have heard the motion and second. All in favor say "Aye." (Unanimous.) Motion carried. We will have a report of the Auditing Committee. Mr. Von Storch read the financial statement.

Jan 1, 1966

By Jim Freeman

After testing 30 fourth year mechanical trade school students with our final mechanical apprentice test, only one passed. ?Most western technical trade school students tested ?Test result average was 52% ?NMC graduating apprentice average is 78% (75% passing requirement) ?Our mechanical test has 200 questions; Electrical test 110 questions

Jan 1, 2010

GREETING Hail! Hail! the Coal Miner, Damn the operator, damn the operator, Hail! Hail to mining coal We'll tell 'em how to run the mines. Oh, we'll send out a questionnaire And we'll quiz 'em, we will razz 'em for fair, We'll ask about the profits and order them to stop it Tell the world we're going to stop right there. Hail! Hail! etc. NASH AND PRYDE Tune, "Gallagher and Shean" There are two mining men, the best I've ever spied, One is Mister Harry Nash, the other Mister Pryde. When these two fellows meet it surely is a treat, The things they do, and the things they say, And the funny way they greet. Say, Mister Harry Nash, Oh, Mister Harry Nash, Tell me what's on your mind this evening, Mr. Pryde; I have heard an awful lot of that steep coal mine you got, And I wondered if some one had up and lied. Oh, Mr. Pryde, Oh, Mister Pryde, It's so steep it seems to lie upon its side. If it were steeper than it is, it would put us out of biz, Absolutely, Mister Harry Nash, positively, Mr. Pryde. Oh, Mister Harry Nash, Oh, Mister Harry Nash, Somebody said that at this new mine you've begun 'Fore you mined a lump of coal, had to burrow like a mole, And of rock you dug out many a million ton. Oh, Mister Pryde, Oh, Mister Pryde, I hate to think of all the dough I supplied. I believe the Moffat Tunnel bore won't cost a single dollar more I don't think so Mister Harry Nash, I agree with Mister Pryde. PARTING Tune, "Leave Me With a Smile" Though a sea of strikes and low price squabbles, Follow us the while; Once a year we gather just to show them whether We still wear-a smile; Rocky music coal still packs a barrel full Of timely fun sans guile, Rocky Mountain Institute can follow such And smile its yearly smile.

Jan 1, 1924

Business meeting was opened at 9:30 a.m., June 28, 1967. President James Westfield asked that the meeting come to order. "We have some business to be taken care of this morning. First, we will have a report from the Auditing Committee." Mr. W. S. Landers read the report and said that it had been audited and approved and the motion was made and seconded that it be accepted. It was accepted unanimously. (See Index for Treasurer's Report.) The Resolutions Committee Report was read by Mr. Cliff Artis as follows:

Jan 1, 1967

of our good friends and fellow members: William D. Brennan Charles Beuchat who left the world better for their having lived in it.

Jan 1, 1931

By John D. Janak

Thank you for inviting me to come here and be your keynote speaker. Texas also thanks you for being included as part of the Rocky Mountain Coal Mining Institute. We'll kind of think of Texas as Baja Rocky Mountains. I've always wondered why coal miners were the only people to go to the mountains in the summer time-and now I know why. The program committee should be given a big hand for selecting this RESORT. And the golf course is stimulating to say the least. This is a very beautiful location. I was asked to talk about CHALLENGES, OPPORTUNITIES and INNOVATIONS as they affect the coal industry. I am going to do that from a Texas perspective. But first, since Texas is the newest state to belong to the Institute, I would like to give you a little background on how our coal industry got started and where we are at today. The vast majority of our coal is called lignite-it has a little lower heating value than most other coals and ranks somewhere between buffalo chips and sub- bituminous. Lignite is found In three geological formations running Northeast to Southwest through South and East Texas. In-place reserves lying within 200 ft. of the surface total 14 billion tons. This slide shows the lignite formations with cur- rent mine operations colored in RED. Mines that are planned to be built in the next 10 years are shown in BLUE. Lignite was used mostly by settlers in Texas during the 1800s. It was used as a fuel to fire locomotives during the Civil War. Between 1900-1930, about 100 mines, mostly underground, were operating in Texas producing lignite for home heating and as a boiler fuel. Here are some slides showing underground access, [lie tipple used to process the lignite, and the underground workings. This is the "BIG LUMP COAL COMPANY" as shown here. The typical underground mine was 100-150 ft. deep and each miner produced 7-10 tons per day-all by hand. In 1926, the Texas Power & Light Company built the Trinidad Power Plant and began using lignite as a boiler fuel. The lignite was mined by the McAlester Fuel Company at the nearby Malakoff Mine. Here are some slides showing a stripping shovel at Malakoff uncovering lignite. The lignite was loaded into railcars in the pit for transport to the power plant. This is a picture of the Trinidad Plant which had two 20 MW units and one 32 MW unit. At the time, Trinidad was the largest power plant in the United States using lignite exclusively as a fuel. Trinidad operated until 1942 when it was converted to natural gas that was sold to the plant for 3 ½ ¢ per MMBT'U. The mine closed after having produced 7 million tons. Lignite was mostly forgotten about until 1953 when Alcoa started an aluminum smelter. Our Company formed a subsidiary called Industrial Generating Company to operate the power plant that furnished electricity to the smelter. We also operated the nearby Sandow Mine that supplied lignite as a fuel to the power plant

Jan 1, 1989

[Abbott, Jay Union Supply Co., 5460 Colo. Blvd., Denver, Colo. 80022 Achziger, Ronald H Midwest Rubber Co., 6404 E. 39th Ave., Denver, Colo. 80207 Adams, Bob Energy Fuels Corp., Box G, Steamboat Sprlngs, Colo. 80477 Adams, David Empire Energy Corp., Box 68, Craig, Colorado 81625 Adams, Dell H Consolidation Coal Co., 3300 One Oliver Plaza, Pittsburgh, Pa. 15222 Adams, Douglas K General Electric Co., P.O. Box 2331, Denver, Colorado 80201 Adams, Kenneth L Arch Mineral Corp., 33 Carnation, Belleville, Ill. 62221 Ahlborg, William Joy Mfg. Co., 1911 Denver Club Bldg., 518-17th St., Denver, Colo. 80202 Albert, Darrell Safety Appliances Co., 400 Penn Center Blvd., Pittsburgh, Pa. 15235 Albrechtsen, Ray H Mountain States Resources Corp., 1399 So. 700 East, Suite 11, Salt Lake City, Utah 84105]

Jan 1, 1975

At 10 a. m., Tuesday, November 12, 1912, the following members of the committee appointed by "Coal Age" to organize a Coal-Mining Institute for the Rocky Mountain region, met in the State Capitol, at Denver, Colo. : E. H. Weitzel W. J. Murray T. H. O'Brien W. B. Williams James Dalrvmple F. W. Whitksiie A. C. Watts David Griffiths The following members of the committee were not present: Frank Manley Allan French H. C. Williams Frank Cameron J. E. Pettit D. W. Brown C. H. Gibbs E. H. Weitzel acted as chairman of the meeting. This committee drew up a form of Constitution and By-Laws, to be recommended to the general meeting to be held on the following day; and, with the exception of two alterations, this Constitution and By-Laws, formulated by the Organization Committee, were accepted as a whole by the general meeting. With the exception of a general discussion of affairs that might be brought out by means of such an institute, no further business was done at this meeting of the Organization Committee, and it was adjourned.

Jan 1, 1913

CHAIRMAN LITTLEJOHN: We have with us this afternoon, Mr. D. W. Rockey, of the Industrial Educational Organization, who would like to occupy a few minutes of our time. There is still an hour left, and there is a lot more talking to be done, and when the time is up you can go. D. W. ROC'KEY (U. S. Vocational Training Bureau, N. M.) : Mr. Chairman and Gentlemen: I am sorry to say I am not more closely connected with the coal mining game. I am interested in it because I am interested in a great deal of educational work being done in New Mexico. Two years ago, this Institute appointed an Educational Committee to investigate the opportunity for education in coal mining, and you have the report of that committee; it was issued in May 1924. Mr. Littlejohn, Mr. Moorhead of the Phelps-Dodge Corporation, Mr. Dickinson, and Mr. Miller, I think, of the C. F. C I., and Mr. Pryde, were members of that committee. They investigated the work being done in Safety, Training, First- Aid, and other topics, and made a general survey of the educational problems that might be said to be of benefit to the coal operators and to the coal miners. I believe, if I understood Mr. Moorhead correctly, while this report was accepted the committee was not discharged; but everyone seemed to be a little in doubt as to whether this activity should continue. My plea here directly is, of course, to ask that they be made a permanent committee, and asked to report to you at the next meeting in February on what has been accomplished in carrying out the program that was advised by the various companies, and what success, from a standpoint of improved work and financial return to the company, has been had. I believe that the whole trend of your discussion here has shown the need or the opportunity for improved production through education. For instance your mechanical loader the need of men who are experienced along mechanical lines, rather than the old pick and shovel methods, and the need of better understanding of your problems, just as in your safety lamp discussion that came up in the report of your Safety Committee. We have also developed a new phase, a new may of getting at some of your problems at Dawson this year, that has not been covered previously. I want to ask Mr. Holman here to tell you what is being done as a starter. Remember, we have not worked this out. He will tell yon how we are making a preliminary start in training inexperienced miners with the idea of cutting the accident record and keeping the production of inexperienced men at a higher level. If you are interested in that, I would like to suggest that this committee be requested to investigate some of these things very carefully. The State of New Mexico was willing to put five hundred or a thousand dollars into this training program as an experiment. We are willing that the Institute should have the credit for it, but we want it carefully surveyed so at your next meeting or some subsequent meeting, they can say this has been a feasible project and worthy of consideration. Mr. Holman, will yon tell us a little about this? (Applause.) MR. HOLMAN: We had an idea that by putting a green man in the mine with an experienced miner, the green man would probably learn something, and not get into trouble, etc. We decided to take a certain portion of one of our best mines, cross entry room work, and establish an underground school. We picked one of the assistant foremen who was well trained in our particular mining methods, and any green man who was employed was put into this school. He was paid a salary and he trained each and every man. Each man or two men world be working in a room and we paid them the regular contract price; they were trained how to shovel coal, pick waste and various other things. Some would stay in there a month and be transferred to other portions of the mine or other

Jan 1, 1926

By R. R. Knill

With the advent of mechanical loading the need of definite information has become more apparent. The co-ordination of all the individual units of operation has become very necessary From these two essential features in running a mechanized coal mine has come the demand for the "time study." The time study is nothing more or less than the recording of each operation together with the time of clay or the total time expended during a period of work. Using the latter, it is impossible to have information showing just when each piece of work was clone and to what extent they overlap. The studies used here are of the former type, being based on the recording of the operation together with the time of day so that the details of performance of the machine or crew may be followed from starting to quitting time by' referring to the graph upon which the study is taken.

Jan 1, 1928

[ACC, Inc. Bucyrus-Erie Company CINCO (Coal Industry Consultants, Inc.) Coal Magazine Colowyo Coal Company Coors Ceramic Company Crane & Hoist Sales, Inc. Cummins Power. Inc. Cummins Southwest, Inc. Cyprus Coral Company Denver & Rio Grande Western Railroad Company Energy Fuels Corporation FMC Corp.- MHE Division Ford. Bacon & Davis Inc. T.J. Gundlach Machine Company Hemscheidt American Corp. GH Hensley Industries Honnen Equipment Company Jennmar Corporation Soy Technologies, Inc. K&P Sales Engineers, Inc. Kennametal, Inc. Kerr McGee Coal Corp. McLanahan Corporation National Mine Service Company Peabody coal Company Pitrsburg & Midway Coal Mining Co. Pyramid Parts, Div. American Alloy Ramsey Technology. Inc. Roberts & Schaefer Company Santa Fe Pacific Coal Corporation Scandura. Inc. Tamarron Resort TIC (The Industrial Company) Tribol Utah Power & Light Western Energy Company]

Jan 1, 1988

PETER A. NIELSEN RMCMI PRESIDENT 1991-1992 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 88th Regular Meeting and Convention to be held June 28-30, 1992 Tamarron, Durango, Colorado

Jan 1, 1991

resident Schloss called the meeting to order at 9:30 a.m. Bob Dean, manager of the Hotel Colorado, gave a brief explanation of hotel policies governing the swimming pool, and also extended an invitation to the Institute to return in 1963, and stated that the dates June 30 through July 3 were available for next year. He also stated that June 28 through July 1 were available for 1964. He felt that holding the convention during the 4th was not good policy, and that dates prior to or following the 4th would make for better attendance. John A. Reeves, chairman of the Resolutions Committee presented the following resolutions: RESOLVED: That the members of the Rocky Mountain Coal Mining Institute in convention assembled, hereby ratify and confirm all official actions of the officers, the Executive Committee and other committees of the Institute between June 28, 1961, and the present time.

Jan 1, 1962

[ACZ, Inc. Boliden-Allis CINCO (Coal Industry Consultants, Inc.) Coal Colowyo Coal Company Commercial Testing & Engineering Co. Crane & Hoist Sales, Inc. Cummins Power, Inc. Cummins Southwest, Inc. Cyprus Coal Company Energy Fuels Corporation Ford, Bacon & Davis Utah, Inc. T.J. Gundlach Machine Company Harnischfeger Corporation Hemscheidt Corp. GH Hensley Industries Honnen Equipment Company Jennmar Corporation Joy Technologies, Inc. K&P Sales Engineers, Inc. Kennametal, Inc. Kerr McGee Coal Corporation Neil F. Lampson, Inc. McLanahan Corporation National Mine Service Company NERCO Coal Corporation North American Coal Corporation Peabody Coal Company Pittsburg & Midway Coal Mining Co. Ramsey Technology, Inc. Roberts & Schaefer Company Rocky Mountain Machinery Company Santa Fe Pacific Coal Corporation Scandura, Inc. Sheraton Steamboat Southern Pacific Utah Power & Light Company Western Energy Company]

Jan 1, 1989