Search Documents

By Kim M

Mukuk gold mine in South Korea produces a pyrite concentrate containing gold associated with arsenopyrite as a gangue mineral. The effects of Portland cement as a depressant on the flotability of arsenopyrite were studied to improve the separation of arsenopyrite from pyrite concentrate containing gold. A series of the fundamental flotation tests were performed using Portland cement as a function of pH and concentration of the collector. Flotation recovery of pyrite and arsenopyrite in the fundamental tests with amyl xanthate showed that arsenopyrite was depressed by the addition of a moderate amount of Portland cement, but pyrite was not depressed by it. In the flotation tests of the artificial mixture samples with arsenopyrite and pyrite, following pH were adjusted to be 10.5 by Portland cement, different amount of amyl xanthate was added. The results from these studies showed that flotation recovery of pyrite was 100 per cent under the condition of some addition of amyl xanthate, but arsenopyrite was not floating at all. Portland cement shows remarkable depression of galena, but its effect on the flotability of chalcopyrite is not as clear. In the pulp under Portland cement addition, chalcopyrite can be easily activated by the addition of sodium bisulphite, whereas galena is depressed more effectively. From the batch flotation tests with the pyrite concentrate, the galena concentrate and the Cu-Pb bulk concentrate from the mines, it was confirmed that the results of the batch flotation tests agree with the results of the fundamental flotation tests. The effects of depression by Portland cement on pyrrhotite, marmatite and stibnite are also discussed briefly.

Jan 1, 1993

The following is a discussion of a new approach to safety when developing or applying a new mining technology. In the form of an engineering process, the following approach had its inception in the military and aviation industries and is also very strongly evident in the chemical industry.The process has been developed and applied in the mining industry by the author. It is called 'Incremental Development and Management of New Technology'.The process is a composite of carefully selected System Safety Management, System Engineering and Financial techniques and methods. It consists of modules which can be modified to suit the requirements of a specific project. Modules provide an organised framework of activities to facilitate a gradual acquisition of pertinent knowledge and information and to enable progressive evaluation or verification of produced outcomes against specified requirements.

Jan 1, 1992

Most mining dredges are adapted from canal/harbour dredges. Their automation and control systems are generally not designed for integrated mining operations. Consequently they have a number of limitations. This paper describes a new dredge control concept which paves the way for improved efficiency and increased production.

Jan 1, 2001

The scale and seriousness of AustraliaÆs social and environmental problems are no longer in doubt. We are consuming the opportunities of future Australian generations by our lifestyle choices. And at the global level, human activities are altering the very systems on which our species depends. Doing nothing about such problems as climate change is not an option. It is possible to move to a sustainable future but it will require fundamental changes to our values and national social institutions. We must recognise that we share a common future with the entire human family and the other species with which we share the planet. It is not just our humanitarian duty to improve the lot of the poorest people of the world. It is also enlightened self-interest because a world of increasing inequality will be a world of increasingly destructive tension.

Jan 1, 2004

Results of blasting trials conducted at Gregory Mine, a large open cut coal mine situated in the Bowen Basin, show that fragmentation was improved or equalled whilst reducing the amount of explosives previously required. This was achieved by a system of deck loading whereby two or more explosive charges, separated by air gaps, were positioned in the blast hole, thereby extending the effective explosive column whilst minimizing the total explosives required. In the three trials to date, a saving of approximately 213 kg of ANFO per blast hole was achieved. This represented an approximate 20% reduc- tion in ANFO requirements.

Jan 1, 1989

By Price B. D, Staunton W. P

The Mineral Science Laboratory of the Government Chemical Laboratories has recently investigated various procedures for the analysis of the platinum group metals (PGMs). This investigation covered a number of methods for the extraction and preconcentration'of the PGMs from a wide range of geological materials. The nickel sulphide extraction technique proved to be overall the most applicable procedure. Flame atomic absorption spectroscopy (FAAS), electrothermal atomisation atomic absorption spectroscopy (ETA-AAS), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) were examined for their suitability in analysing platinum group metals in solution. ETA-AAS and ICP-MS proved to be the instruments of choice due to their low detection limits.

Jan 1, 1987

Gentlemen, you heard the good Doctor has commissioned me to make a'summary of the proceedings to date and also to close the said proceedings. It seems that over the years the business of making a summary alternates between'Mr. Pearce and myself, also I,think that w~oever is around onthe day in question 'obtains the task and apparently I drew it this, year. It is hoped you will be patient as previous experience in this capacity'indicates that the best way to proceed is to have a brief summary on each paper and then do a summary of summa~ies. This makes the approacha little cumbersome but it is felt to be fair to each author and it brings'back to the audience some recollections of what transpired at the time and they can make their own decisions, which may not necessarily agree with those of the 'sum'marisor.

Jan 1, 1983

Those involved in managing risk today are asking various questions: why is it so frustrating to discuss æriskÆ with communities? why do consultative processes around æriskÆ get more and more complex? where is all this going to end? These questions will be addressed by examining how our understanding of risk has changed from one based on biophysical hazard to a broader view that includes social and cultural factors. There is evidence to suggest that we are living in a ærisk societyÆ, where the goal of æsafetyÆ has replaced that of equality in a class based society. The global mining industry operates within this complex and politicised environment. The very meaning of ædevelopmentÆ has broadened from the narrow economic vision to include the social and environmental factors which make up æSustainable DevelopmentÆ. Corporate accountability now extends beyond traditional shareholders to wide groups of stakeholders. The mining industry is developing responses which look beyond traditional technocratic methods. At the industry level these responses have included the recent Mining Minerals and Sustainable Development global and regional reports It has proven challenging and difficult to operationalise these new understandings at the company level and it is time to look at the bigger picture.

Jan 1, 2003

Mining Automation By Professor Hugh Durrant-Whyte, Australian Centre for Field Robotics and Centre for Mining Technology and Equipment, Department of Mechanical and Mechatronic Engineering, The University of Sydney Professor Hugh Durrant-Whyte summarised why the mining industry needs to automate and reviewed the current automation technology - its risks, costs and benefits. Why automate? The drivers for automation include: safety, productivity, quality control and reduced manning, equipment utilisation, maintenance, and organisation and planning. Durrant-Whyte recommended starting out with a picture of a fully automated mine and working backwards through a systematic analysis of benefit and risk. This also involves looking at the impact of the total automation on current mine design, and identifying the key technologies.

Jan 1, 1997

By X B. Sun

Mining work is a high-risk operatation under a special environment. It is affected by space, lighting, noise, vibration, dust, air pollution, etc as well as coal seam conditions, complicated geology construction, combustion of coal, gas, coal dust, etc. Factors which affects safety production are numerous, eg natural conditions, technical equipment level, producersÆ and managersÆ qualities. It is a complex system engineering to ensure mining safety and high efficiency. Among the ideology, methods and measures of safety management are the most important factors besides safety technology. Mine productive environment is a main problem that affects minerÆs work as far as safety and health are concerned. Combining ChinaÆs mine productive environment situation and using human ergonomics theory, this paper explores a series of measures and suggestions as to how to reinforce safety management, how to build up the safety management ideology, how to improve the mine production environment, how to decrease coal mine accidents, and how to ensure mining safety and high efficiency.

Jan 1, 2003

Until 1937, the mining of ore was carried out by conventional methods, using pneumatic drills and standard drill steel. The adoption of the diamond drill, formerly used for exploration work, for blast hole drilling in stopes, was first developed by Noranda Mines Limited, Noranda, Quebec, although it had been used previously in Northern Ontario and Western United States, to remove weak pillars and ore remnants left by conventional methods. Previous to the adoption of the diamond drill method at Noranda, a sub-level benching system of stoping was used. Sub-levels were driven at 35 ft. intervals and the benches drilled off by pneumatic drills using sectional steel. Results were very satisfactory, in sulphide ore, where the drilling was comparatively easy, but in the harder rhyolitestopes the footage drilled per machine-shift was only half of that obtained in the sulphide stopes, and owing to the high gauge loss, there was often difficulty in drilling holes to the required depth. This led to trials with the diamond drill for this type of work. While the cost per foot was more than with sectional steel, an appreciable saving in development work could be made by increasing the sublevel interval from 35 ft. to 60 ft., and stope widths from 60 to 100 ft. This saving, together with the increase in blasting efficiency, resulted in a substantial reduction in overall costs.CONDITIONS FOR SUCCESSFUL APPLICATIONWhile long diamond drill blast-hole mining has widespread application, there are certain conditions which appear to be desirable, if not absolutely necessary, for its successful use.

Jan 1, 1946

Newmont Waihi Gold operates the Martha Mine open pit at Waihi, New Zealand and is developing the Favona Underground Project two kilometres to the east. The Company is exploring the Waihi district under eight exploration permits totalling 6300 hectares.   Martha Mine is scheduled to close in late-2006. The Company has instigated and funded a significant programme of community consultation to mitigate the effects of mine closure on the community and enhance effective participation in the selection and provision of appropriate community facilities post mining.   This paper provides an overview of current issues and future developments.

Jan 1, 2004

By K Paki, K Parker, J F. Dupont

The Mount Charlotte grinding circuit at KCGMÆs Fimiston mill was recently equipped with three 650 mm CAVEX cyclones in order to improve the overflow P80, reduce the fines bypass to the underflow and improve the underflow density/recovery of water to the overflow. After the first two sets of surveys were conducted air core boosters (ACBs) were installed on the 650 mm CAVEX cyclones in an attempt to further increase their performance. JKTech was approached to assist with the examination of the data obtained from the surveys; this data was intensively modelled to determine, to a high degree of confidence, the impact the changes to the cyclones had on the classification and the benefits to the plant. This paper outlines the outcomes of the trial and the methods used to determine those outcomes.

Jan 1, 2007

A vigorous seismic and drilling programme has been conducted over.ar area of .59000 square miles in the Roma district during the last three years. The work is Mill' in progress and although many new geological concepts have been discovered, he subsurface geology is not yet finalised. D.atailed examination has shown many variations of .section, has established the general basement trends and sedimentary thicknesses, has shown that much more of the section is marine than previously thought ~nd has indicated that any reservoirs throughout the section could be potential oil ind/or gas producers if suitable traps are located.

Jan 1, 1962

Hydrometallurgy has a history of over 300 years with copper leaching and cementation having been exploited in Spain as far back as 1670. Since then, hydrometallurgy has become an integral, expanding branch of extractive metallurgy. This paper reviews major developments in hydrometallurgy over the past century with emphasis on recent commercial developments and their impact on the mining and metals industries. The environment in which these developments has taken place has changed significantly in the past two decades and many factors, often non-technical, have emerged as constraints on the operation of existing plants and the expansion and development of new hydrometallurgical operations. Finally, a number of possible new developments that will shape the future of hydrometallurgy in the new millennium are discussed, particularly as they relate to the assimilation of technical advances in other areas of science and engineering. The impact of current trends in the education of hydrometallurgists and the provision of research in support of these future developments is also addressed.

Jan 1, 2000

This short paper outlines the authorÆs views regarding the progress we have made as an industry in managing mining assets over the past 500 years. It represents a personal view û but one founded in fact-based observations of mining companies and of the mining industry in general. There is no doubt that AgricolaÆs views as expressed in De Re Metallica (1556) were visionary. There is also little doubt regarding another issue û that whilst a great deal has been learnt about the management of mines since AgricolaÆs time, observations suggest that best practice management is the exception rather than the rule across our industry. Although insights regarding the successful management of mines have become apparent, we still witness unnecessary errors in our industry that lead to the loss of shareholdersÆ funds. By highlighting some aspects of current best practice, particularly in the arena of operations management, it is hoped that this short paper contributes a small step along the next 500-year-long learning curve. The paper concludes with a brief description of the progress and impact of continuous improvement initiatives at Kalgoorlie Consolidated Gold Mines (KCGM). Located in the Kalgoorlie Goldfields, KCGM is currently AustraliaÆs largest gold mine producing over 800 000 ounces of gold per annum. Improvement initiatives at KCGM look set to deliver some $100 million in value over life-of-mine.

Jan 1, 2004

The three main types of iron ore deposits in Australia are bedded, massive and residual. Some character- istics of iron ore, important in its process behaviour, are related to its mineralogy which is a result of its geological history. World iron ore resources are extremely large but there are problems in quantifying re- serves, defined as that part of re- sources from which a useable commodity can be extracted economically. The relationship between the discovery and exploitation of iron ore resources and the process of industrialization is examined in historical and present day contexts.

Jan 1, 1976

Cyanide is a significant contributor to the cost of producing gold. Any reduction in cyanide consumption that is achieved through more reliable measurement, and/or more efficient management of cyanide dosing rates, can produce a significant financial saving to the mine operation.

Jan 1, 1997

By P Church

What is the best method of splitting a sample from a reverse circulation drill rig? How important is it to obtain a correctly split sample? What is the impact of an incorrectly split sample? These are just a few of many questions asked daily in the mining industry with regard to sampling. Modern sampling theory is well described in the literature in texts and is taught in short courses throughout the world, however little has been published on the relative performance of sample splitting devices used in the field. This paper compares the performance of the Jones tiered riffle splitter with a cone splitter manufactured by SGS Metal Craft in Western Australia. The testwork was carried out at AnglogoldÆs Sunrise Dam Gold Mine, 55 km south of Laverton in Western Australia. Mineralisation at Sunrise Dam is hosted in a structurally complex framework of shear zones with dips that range from steep (70¦) to shallow (25¦). The deposit is characterised by significant amounts of coarse gold, which presents a challenge in sampling, analysis and grade estimation. The three major areas where sampling errors can occur are in drilling, sampling, sample preparation and analysis. Sampling errors attributable to drilling and sample preparation often far outweigh the errors made at other stages in the process, however historically most effort to identify sampling errors has concentrated on the laboratory and analytical procedures. Splitter design and cleanliness can have a large impact on sample collection and preparation. Splitter performance was tested with respect to sample weights, particle size distribution, and gold grade consistency. The aim was to determine if each particle has an equal probability of being sampled, the resulting sample has integrity, and if any segregation problems occurred. The cone splitter was found to provide the best split in terms of particle size distribution, with no apparent size bias. Duplicate samples had more comparable masses than those provided by the riffle splitter. Most importantly, the cone splitter gave less grade variability between duplicate samples than the riffle splitter. Testwork also confirmed that, like the riffle splitter, the cone splitter must be oriented vertically and the design of the rig or cone splitter trailer should accommodate this requirement.

Jan 1, 2003

By van Eck M, Orr T, Eggleton R. A, Taylor G

The Charters Towers locality has been a historically renowned gold producing region and discovery of new ore deposits during the past decade have renewed exploration interests in the area. Further mineral exploration with conventional techniques is hindered by the presence of Cainozoic sedimentary deposits and volcanic flows overlying a major portion of the basement geology. Mineral exploration thus warrants new, innovative and cost-effective methods to probe beneath the Cainozoic cover in an attempt to discover new orebodies. There is growing awareness of the role of weathering as an agent of chemical dispersion into the cover sediments as well as a producer of supergene deposits in tectonically stable cratons (Butt and Zeegers, 1992). Consequently, landscape evolution coupled with regolith geochemistry is one of the methods increasingly being used to identify relevant sampling media to explore beneath weathered cover sediments and deeply weathered bedrock terrain (Anand, 1993). The aim of this paper is to describe and elucidate the regolith - landscape features of the region and combine geochemistry to assess the pertinence of the same on mineral exploration strategies in the Charters Towers area.

Jan 1, 1997