Search Documents

Crystalline glass defects (usually referred to as stones) come in a wide range of compositions and from a variety of sources. Complete identification requires a determination of the mineral phases present and their textural arrangement. Until the source has been determined, no remedial action can be taken to eliminate the problem.

Jan 1, 1989

The paper examines the current status of risk and accepted practice in mining geomechanics. It explores some deficiencies in human capital, risk analysis and our future technical needs, and suggests ways of improving our estimates of slope reliability through knowledge sharing and research.

Jan 1, 2003

Fluid bed sulphation roasting followed by leaching at low pH was developed as a means of separating copper and bismuth from a mix- ture of flotation concentrates and flash fur- nace flue dust. A 65 tonne/day plant was established and typically achieves 89 percent copper extraction with negligible bismuth and iron extraction. Acid-chloride leaching of bismuth from copper leach residue was then established, with bismuth oxychloride being precipitated from solution by dilution with water. A small scale batch plant presently in operation typic- ally achieves 80 percent recovery of bismuth to bismuth oxychloride.

Jan 1, 1986

The paper describes the $US240 million expansion at Hudson Bay Mining and Smelting Co LimitedÆs operations in Canada. The company has been continuously producing copper and zinc from local area mines at its Flin Flon metallurgical plant since 1930. The paper details the companyÆs operational turnaround since 1995 and æThe 777 ProjectÆ which includes: two new mines, expansion and modification of the concentrators, expansion of the zinc pressure leach plant, a new zinc electrolytic cellhouse and the modifications to the copper smelter gas handling system to reduce ground level gas emissions.

Jan 1, 2000

Although few people know of it, Woodlark Island produced a relatively large quantity of gold in a short period at the turn of the century. Deaths of miners, enticement to richer fields elsewhere, and world wars have contributed to the abandonment of these gold fields to their present obscurity. In the mining boom, companies were formed, amalgamated and bought-out in a flurry of activity but present records are incomplete. The main sources of information are annual reports of the Department of Land Surveys and Mines in Papua, a few geologists' publications (notably Pinder,1901; Stanley, 1912, 1923; Trail,1967) and a variety of unpublished data. The first traces of gold in New Guinea were'found by Saavedra in 1528. The first gold in Papua was found near Port Moresby in 1878. The next discovery was at Sudest Island in 1888 followed by Misima Island in 1889 and Woodlark Island in 1894. By 1910 the "Murua Goldfield" (Woodlark Island) had contributed over 43% of the total gold yield of the Territory of Papua.

Jan 1, 1987

The Effect of Grinding Aids on Laboratory Grinding of a Cassiterite-Polymetallic Sulfide Ore

Sep 13, 2010

The paper looks at those factors which led the Latrobe Valley Community Forum to .focus on shortcomings of the consultative process. that existed around the 1980 period, and the limitations on the ability of the community of the Latrobe Valley to have input to the factors affecting their quality of life. Through a review of the Yallourn East Field Extension project it seeks to demonstrate the changes that have occurred and some of the shortcomings still existant in the consultation process.

Jan 1, 1992

By Warrillow C

Petroleum and mineral exploration share a common objective; to find and exploit commercial reserves of the desired commodity. Some exploration techniques are similar, others widely different.In peripheral matters such as permits, regulation procedures, land and compensation, there are many similarities. Despite this, the percep-tions and expectations of landowners and other interested parties reflect to a large extent the methodological differences between mineral and petrol-eum exploration. This can cause compensation demands and regimes to be vastly different in the two sectors.

Jan 1, 1994

Back at the turn of the century, the Eastern Goldfields region of Western Australia was entering its moment of glory. Development was going ahead at a cracking pace and miles of shaft and drives were being opened up. On the Great Boulder Gold mine alone, records show that there were two kilometres of shaft and 30 kilometres of -driving completed in the first five years of operation.Similar statistics were being achieved by hundreds of other mines on the Golden Mile and in other districts in WA.

Jan 1, 1993

Aspects of sampling are becoming more complex, involving a correct statistical approach to collection as well as geological and possibly pedological control. Advanced chemical techniques and techniques of rapid analysis need to be understood. Results may require statistical analysis. The elementary aspects of sampling still need constant attention by those controlling a programme of sampling. No one person will have sufficient knowledge of statistics, geology, pedology and chemistry to be fully conversant with all the aspects of sampling but, by developing a correct approach, problems can be identified and solved.

Jan 1, 1976

In China the hydrogeological type of solid mineral deposits can be divided into A. Mineral deposits with fissure water; B. Mineral deposits with pore water; and C. Mineral deposits with karst water. The hydrogeological conditions of mineral deposits with fissure water are relatively simple with the exception of a few cases. Mineral deposits with pore water are few but great amounts of ground water can be encountered in the mine accompanied by floating sand or slope failure during the exploitation. Mineral deposits with karst water are complex in their hydrogeological conditions. Enormous inrushes occur frequently in the mines of north China; Karst collapses are a serious matter in the mines of the south; Subterranean river and conduit systems are often encountered in the southwest. This paper will give full discussion on these features and put forward a way of combating and controlling the groundwater problem in accordance with type and feature.

Jan 1, 1988

By J L. Bos, D J. Readett

As mining progressed through the Girilambone oxide orebodies, down to the primary sulphide zones, each successive stratiform layer yielded copper bearing ores of changing mineralogy and grade. Constant changes, innovations and optimisation were required to be applied to the heap leach, solvent extraction and electrowinning operations, to efficiently produce LME Grade A quality copper cathodes from this ore. The changing ore types required various crushing, stacking and heap leach irrigation methods to ensure that optimum recovery from the predominantly low-grade copper ores was efficiently achieved. Subsequently, innovations such as heap aeration and heap rejuvenation techniques were implemented. The constant selective removal of copper from the maturing heap leach liquors, coupled with an increase in iron(III) concentration, required solvent extraction optimisation. Changes to the original solvent extraction circuit configuration, combined with changes in operating parameters and procedures, allowed effective processing with changing heap liquor compositions. The electrowinning tankhouse was also upgraded and optimised through continued testwork and monitoring, to maximise cathode production and quality

Jan 1, 2000