Search Documents

By David S. Cronan

Submarine hydrothermal mineralization occurs in at least three locations along the Hellenic Volcanic Arc in the Eastern Mediterranean Sea. Weak hydrothermal discharges occur off Kos and Nisseros at the eastern end of the arc and off Milos at the western end. In both cases the hydrothermal solutions are rich in iron and manganese and are precipitating iron oxides variably enriched in minor elements. This points to the likely presence of sulphide minerals at shallow depth below the sea floor at these locations. By contrast, at Santorini, in the centre of the arc, the hydrothermal discharges are much stronger and rate of deposition of the hydrothermal minerals much greater. Indeed, in one of the two hydrothermally active embayments off Santorini (Nea Kameni) hydrothermal deposits are accumulating up to five times as fast as in the Atlantis II Deep of the Red Sea. Radiocarbon dating indicates that these deposits have been accumulating for about 100 years. In the other embayment off Santorini (Palaea Kameni), hydrothermal deposition has taken place over a longer period (more than 1,000 years) but the deposits are not so hydrothermally enriched due to the simultaneous deposition of biogenic silica and detrital mineral with the hydrothermal deposits. The observed pattern of increasing intensity of submarine hydrother¬mal activity from the extremities of the arc towards its centre argues for additional hydrothermal mineralization on poorly explored areas of the sea floor between Milos and Santorini and between Kos and Santorini.

Jan 1, 1994

By Cheong-Kee Park

Paleomagnetic properties of sediment cores were examined to reconstruct paleodepositional conditions in the Korea Deep Ocean Study (KODOS) manganese nodule area, located in the northeastern equatorial Pacific. The KODOS sediments studied have a stable remanent magnetization with both normal and reversed polarities, which are well correlated with the geomagnetic polarity timescale for the late Pliocene and Pleistocene. Average sedimentation rates were 1.56 and 0.88 mm/kiloyear for the Pleistocene and late Pliocene, respectively. Clay mineralogy and scanning electron microscope analyses of the sediments indicate that terrestrial material was transported to the deep-sea floor during these times. The variations of sedimentation rates with age may be explained by the onset of the northern hemisphere glaciation and subsequent climatic deterioration during the Pliocene and Pleistocene. For the Pleistocene, an increasing sedimentation rate implies that input of terrestrial materials was high, and also a high input of biogenic materials was detected as a result of increased primary production in the surface water. The down-core variations in paleomagnetic and rock-magnetic properties of the KODOS sediments were affected by dissolution processes in an oxic depositional regime. As shown by magnetic intensity and hysteresis parameters, the high natural remanent magnetization (NRM) stability in the upper, yellowish brown layers indicates that the magnetic carrier was in pseudo-single domain states. In the lower, dark brown sediments, only coarse magnetic grains survived dissolution and the NRM was carried by more abundant, multi-domain grains of low magnetic stability. The down-core variation of magnetic properties suggests that the KODOS sediments were subjected to dissolution processes resulting in a loss of the more stable components of the magnetic fraction with increasing core depth.

Jan 1, 2004

By Anthony Wakefield

Dredging tends to be either horizontal or vertical. In each case solids have to be disengaged from the deposit, mobilized, acquired and elevated or translated. One means of elevation is the airlift. Elevation and translation of essentially granular material nay be by jet pump or centrifugal pump. Any of the three types may be used on its own. The airlift and jet pump may he combined for vertical transport and the centrifugal and jet pumps for predominantly horizontal. Both suction point and pipework must have a means of deployment from the surface or from a submerged vehicle or merely a diver. An airlift is an energetic system, having a source of energy and a means of storing it. It therefore will be difficult to prevent oscillation -surging. A centrifugal pump has a characteristic that bends over at low flow rate and is therefore intrinsically unsuitable for pumping solids. The result is blockage, operation at high velocity and correspondingly high wear rates or operation at low concentration of solids and correspondingly low efficiency. The jet pump is intrinsically exceptionally stable but has a low hydraulic efficiency. The jet pump-airlift hybrid prevents or reduces surging and increases system efficiency away from the optimum depth for airlift operation. Delivered solids concentration is increased. The jet pump-centrifugal pump hybrid totally prevents pipeline blockages and increases the productivity from a given pipeline size. For a given energy input the average production is typically doubled. For example, the Indian River Delaware bypassing pipeline transmits an overall day-in-day-out average of 500t/h (tonnes) of sand down a 10.86" diameter line.

Jan 1, 1998

By Se-Won Chang

This is a part of the joint KIGAM-GNS-NIWA 3-year study of ferromanganese nodules on the Campbell Drift, east of Campbell Plateau to determine age distribution, growth rates and geochemical evolution in relation to geographic setting. During the research voyage SAA3 by R/V Tangaroa (TAN 9909) in July-August 1999, seafloor sampling and camera towing were conducted along the two transects across the known flow path of the Deep Western Boundary Current (DWBC) perpendicular to the lowermost margin of the Campbell Plateau and Bollons Seamount. The four major nodule facies, SHH (slope hydrogenetic nodules with high density), AHH (abyssal hydrogenetic nodules with high density), ADH (abyssal diagenetic nodules with high density), and ADL (abyssal diagenetic nodules with low density) were identified. Two additional minor nodule facies, SIB (slope irregular nodules with ice-rafted boulders) and SHB (slope hydrogenetic nodules with boulders and crust), of localized distributions are also identified.

Jan 1, 2003

By Elizabeth McIsaac, Wylie Spicer

"In July 2016 the International Seabed Authority (the “ISA”) released a first working draft of its mineral exploitation regulations as well as the standard contract terms for mineral resources in the Area, for which stakeholder input was sought in late 2016. In January of 2017 the ISA released a discussion paper on environmental matters related to these draft regulations. The ISA is now in the process of further developing its draft exploitation regulations and standard contract terms to ensure that seabed mining is carried out in an environmentally sound way for the common benefit of mankind.As the regulator of the “Area”, the ISA can draw lessons from onshore mining regulators and offshore petroleum regulators for their experiences in legislative drafting to smoothly and safely oversee project development, implementation, and closure. However, one of the unique challenges that the ISA faces in regulating private industry is its status as an international organization and not a sovereign nation, which results in a significantly different legal relationship between the regulator and the regulated. The result is that the exploitation contract is the sole legal connection between the mining proponent and the regulator for the exploitation phrase of the project.Accordingly, in the regulatory development process, the ISA must carefully consider which rights and obligations are set out in the exploitation contract versus the regulations. This decision will dictate the flexibility the ISA will have to modernize the conduct required of mining proponents in response to changing best practices in the industry, technological progress, and advances in the understanding of the marine ecosystem. As the first working draft of the exploitation regulations sets out an initial contract period of twenty years, it is crucial for the ISA to carefully consider the rights, obligations, and procedures it agrees to in the exploitation contract, as unilateral amendment will not be possible after contract execution."

Jan 1, 2017

By Nobuyuki Okamoto

The 21-year long-term Japan-SOPAC Cooperative Deep-sea Mineral Resources Study Programme was completed in March 2006. The Programme, which commenced in 1985, has seen numerous marine research surveys being conducted within the Exclusive Economic Zones (EEZs) of 12 SOPAC member countries (Figure 1). The various research and government institutions that have been closely involved in this longstanding Programme include: the Japan International Cooperation Agency (JICA); Japan Oil, Gas and Metals National Corporation (JOGMEC) (formerly, the Metal Mining Agency of Japan, MMAJ) and relevant ministries of the participating Pacific Island governments.

Sep 24, 2006

By Valery M. Yubko

"The conceptual basis of the developed model is based on the ideas that evolution of geological-geomorphological structure of the CCZ is controlled by four types of geologic factors: geodynamic, sedimentary, volcano-tectonic and erosion-lithodynamic. In terms of time span two factors (geodynamic and sedimentary) can be considered as permanent and the other two as sporadic.The geodynamic factor is responsible for two interrelated geological processes. One is going under conditions of the axial zones of spreading centers and results in formation of the CCZ basement. Historically this process is considered as a starting point for each of the heterochronous fragments of the CCZ. The second one controls gradual shifting towards the Pacific Plate (Hawaiian direction) and subsidence to greater depths of the neogenic fragments (basement). Thus, those processes control basic topography, geomorphology and the seabed depth within the CCZ.Volcanogenic-hydrothermal activity of the EPR is one of the main sources of the ore components, which finally compose manganese nodules as a result of complicated processes of their dissemination and transportation to the bottom in dissolved and organically bound forms.The role of the other constant factor (sedimentary) is displayed in two ways. Firstly, initial relief is smoothed under the influence of this factor, which, subsequently, makes favorable conditions for manganese nodules formation. Secondly, it favors transportation of the majority of the ore components, participating in manganese nodules formation into zones of active nodules formation."

Jan 1, 2017

By Luc Rombouts

The resources and reserves calculation of marine diamond deposits should be based on a systematic sampling grid. The distribution of the sample grade results tends to be very skew and has a large variance. A bias is easily introduced due to the fact that the grade distribution of the samples is very different from the grades of the area of influence. The temptation is always there to extrapolate the highest grade samples simply to their area of influence. If this is done, the higher grade areas will be systematically overestimated, while the lower grade areas will be underestimated. Such a bias should surely be avoided by weighing the sample grades in such a way with their neighbours, so that the estimated grades have a similar distribution as the grades of the blocks. The grade distribution of small mining blocks tend to be lognormal-like. If the coefficient of variation is known, i.e. the standard deviation divided by the mean, then the grade distribution of the small mining blocks is relatively well-defined. The distribution of the diamonds within the deposits can be simulated, based on the histogram of the sample results and on the semivariogram. The diamonds tend to cluster in trapsites. From the semivariogram and the histogram, the average size and spacing between trapsites, and the grade distribution within the trapsites, can be calculated using the model of the General Family of Discrete Distributions. Using such a simulated deposit, the grade distribution for different block sizes can be obtained. The grade distributions become more lognormal-like with increasing block sizes, as the trapsite effect is reduced.

Jan 1, 1998

By Kira Mizell, James Hein

"INTRODUCTIONThe majority of studies on the genesis of ferromanganese crusts focus on the adsorption and accumulation of metals, and therefore cations, especially those of economic interest. From these studies, a first-order electrochemical model has been proposed based on the zero point of charge of the manganese and iron oxides at typical seawater pH, which assumes that positively charged ions will bind to the negatively charged manganese oxide phase and neutral and negatively charged ions will bind to the slightly positively charged iron oxide phase (e.g. Koschinsky and Halbach,1995; Hein et al., 2013). While the theory behind this model is sound, and it has been consistent for many elements, other elements may not follow the model (Koschinsky and Hein, 2003), and thus requires additional investigation and validation. As a new approach to understanding element accumulation in ferromanganese crusts and to test the proposed electrochemical model, this study investigates the surface chemistry of the halogens, which occur as negatively charged ions in seawater and have high and consistent concentrations in seawater.ResultsBulk Halogen ConcentrationsTo determine the distribution of halogens in ferromanganese crusts, an initial dataset of 24 FeMn crusts (24 bulk and 19 layer samples) from throughout the global ocean, including the Arctic and the Southern Oceans, has been analyzed for chlorine and fluorine content using ion-selective electrode. Although both Cl and F are conservative in seawater, their content in crusts shows striking variability (Cl: 326 - 13310 ppm; F: 146 – 1048 ppm for non-phosphatized crusts) and has no obvious geographic relationship to ocean basin and no correlation with water depth, latitude, or longitude. We plan to have bromine concentration data to present at the time of this conference."

Jan 1, 2017

By S. Rajendran

Gas Hydrates (Methane Hydrates) are solid, ice ? like substances composed of water and natural gas. They occur naturally in areas of the world where methane and water can combine at appropriate conditions of temperature and pressure and are found in the ocean bottom sediments and in some permafrost areas. Besides temperature and pressure, factors like bathymetry, sediment thickness, sedimentation rates, and total organic carbon content (TOC) also control gas hydrate formation in the sea. The stability of gas hydrates depends on the critical high pressure ? low temperature combination (0-17 bars, 0-25ºC), which in turn dependent on the mix of gases from which the mineral is formed. As the critical parameters can be altered by deposition, erosion or slumping of sediments, formation or melting of ice cover, rise and fall of sea level and sudden temperature changes induced by tectonic activities, current flows or volcanisms, the gas hydrates tend to be very unstable. It is becoming increasingly evident that naturally occurring gas hydrates are significant component of the shallow geosphere and are of societal concern in at least three major ways: as an energy resource, a geologic hazard and a major contributor for climatic changes.

Jan 1, 2010

By A. Ivanova

The continental shelves occupy a vast area of Russia and contain complexes of commercial placer minerals. Of prime importance are Cenozoic placers of valuable minerals including gold, cassiterite, diamonds, chromite, platinoids, and minerals of titanium, zirconium and rare earth elements, biogenic amber and fossil ivory (1). Commercial placer minerals are associated with shelf placer formation zones (SPFZ). These zones are located at junctions of marginal orogens and shelf troughs in morphostructures where upwarping, subsidence, and sign-variable neotectonic movements are not significant. The SPFZs are characterized by ancient buried leveling planes with mantles of waste, series of wave-cut aggradation terraces on land and beneath the sea, and drowned and buried stream valleys. The occurrence of mineral placers in the SPFZs was caused by endogenic mineralization and exogenic placer hosted formation. Concentrations of commercial biogenic minerals are associated with areas of burial of biogenic material (release of resins by plants and theriofauna thanatocoenoses) and with their transition zones. Since the Oligocene, alternations in marine transgression-regression have dominated the shelf areas. This has resulted in the formation of polygenic placers. Climatic conditions are of great importance: warm and humid climate in the Paleogene-Neogene changed to colder climates in the late Pliocene (polar type sedimentation; formation of permafrost strata and sea glaciation). These events are responsible for the regularity in placer formation during the Cenozoic in which the early Cenozoic (Eocene-Oligocene-Miocene) and late Cenozoic (late Pliocene-early Pleistocene and late Pleistocene-Holocene) epochs are prominent.

Jan 1, 2004

By Wilhelm Schwarz

Manganese nodules lay in vast areas of the deep sea floor. Ideal harvesting conditions for a manganese nodule field are dense nodule abundances of nodules between 20 and 60 mm diameter and a metal content as high as possible. With regard to the development of collector technology, the properties of the deep sea soil, in which the nodules are embedded and to which the nodules stick, are of major interest. The forces for loosening the nodules have to be provided by the collector. For this purpose water jets and/or mechanical devices can be employed. For the choice of the best collecting procedure, various criteria, such as collecting rate, energy consumption and the environmental impact on the eco system of the deep sea floor, have to be considered and weighted as to their importance. Nowadays, the concept of a mining system with a flexible transport hose and a self propelled collecting machine is increasingly accepted among the expert community. With regard to the trafficability of the deep sea soil with a self propelled mining machine, the mechanic properties of the soil and the morphology of the deep sea floor are of special importance. The manganese nodule fields, which are interesting with regard to their recoverability, are mostly in the areas of tectonic fracture zones, at which the morphology of the sea floor is formed by vulcanic activities. In these areas, deep sea mountains, pits and other obstacles exist that have to be driven around if not trafficable.

Jan 1, 2003

By Valery M. Yubko

During the last ten years seven applications for nodule-bearing areas of the World Ocean Floor International Region (IR) have been made by national companies of Russia (Yuzhmorgeologiya), France (IFREMER/AFERNOD), Japan (DORD), India (The State Department of Sea Resources Development), China (COMRA), Korea (KORDI) and the Interokeanmetal Joint Organization (IOM) of some East European countries and have been registered by the Preparatory Commission of the United Nations International Seabed Authority (ISA). Besides these groups registered within Resolution 11 of the Final Act of the III United Nations Conference on the Law of the Sea there are four international consortia registered in the USA [Kennecott (KCON), Ocean Mining Associates (DMA), Ocean Management Incorporated (OMI), and Ocean Minerals Company (OMCO)], which have interest in areas in the IR and can be considered as potential applicants. All registered areas (with the exception of the Indian Ocean) including the areas of potential applicants and also 6 areas, reserved for the ISA are located in the Clarion-Clipperton Zone of the Pacific Ocean. If within each area not less than one deposit of polymetallic nodule-bearing ores can be discovered, then, the total number of such deposits, for the present moment, is 20.

Jan 1, 1994

By S. Jeffress Williams

The topic area for this paper covers the United States portion of the northern Gulf of Mexico, extending from the Rio Grande delta east to the Florida peninsula. Declaration of an Exclusive Economic Zone in 1983 expanded Federal economic jurisdiction on the continental margins from 12 to 200 nautical miles seaward from the coast. The nation-wide area of the EEZ totals 3 million square nautical miles, with approximately 186 thousand square nautical miles in the Gulf of Mexico. In the Gulf, the continental shelf has an area of 81 thousand square nautical miles, extending to a depth of 600 ft. and having widths of 6 to 120 nautical miles. Specific areas on the shelf offer the greatest potential for containing aggregate and other hard mineral resources. The primary geomorphic features along the Gulf coast include: barrier islands, chenier plains, tidal inlets, bays and lagoons, estuaries, and deltaic headlands. These features are composed of terrigenous siliclastic sediments, except for the west Florida coast, south of 29°N latitude, which is dominated by carbonate sediments. On the shelf, the primary features are linear sand shoals and associated sand sheets, relict delta lobes and channels, and banks related to salt diapirs and coral reefs. The composition and distribution of sediments in these coastal and shelf features are determined by numerous geologic factors including: seabed topography; riverine sediment discharge; sediment dispersal patterns due to currents, waves, storms and tides; tectonics and subsidence; and repeated fluctuations in sea level.

Jan 1, 1986

By Tae-kyeong Yeu

KIOST has developed the pilot mining robot, named MineRo ?? from early-2011 to mid- 2012. The robot consists of two unit-modules having an identical mechanical structure and hydraulic system. One unit-module has two track systems, two pick-up devices, two crushers, one lifting pump and one thruster. The pick-up device is fitted on the frame of the track device. All actuators are driven hydraulically, which are manipulated by valves and the controllers. Each unit-module is equipped with one dual HPU of 250kW / 4,000V. PWM-16 (INNOVA AS) as hydraulic valve controller is adopted, which outputs PWM signals of 16 channels and can be used under pressure in oil-filled box. To measure angular velocity or displacement of hydraulic actuator, turbine-type flow-meters are adopted. The flow-meter has RF (Radio Frequency) type pulse detector, which extends the flow range by eliminating drag on the rotor. Two track motors, two crusher motors, lifting pump, one thruster can be controlled their velocities through feedback of the measured flow-rates. As well as the flow-rates, the states of the hydraulic system such as hydraulic pressures, temperatures, leakages are measured through a self-developed flow-pressure canister. In that canister, multi-channel amplifier boards are installed, through which the vast amount of data is acquired and transmitted to the main controller using serial communication.

Sep 14, 2011

By Andrew G. Hudson

The long-term economics of each of the four principal metals in marine manganese nodules (copper, nickel, cobalt and manganese) was evaluated to determine the anticipated viability of a nodule mining venture based on existing studies of the potential profitability of a nodule project. This included assessments of the lifetimes of land-based reserves, and examination and econometric modelling of the economic variables thought to affect nodule metal prices and demand. These analyses demonstrated that a) land-based reserves of the nodule metals were likely to last well into the future (100 400 years); b) average nodule metal paces were likely to stay a low levels for the foreseeable future; and c) the expected revenue stream from a twenty- ear nodule mining venture was substantially (42%) below that required to attract the necessary investment capital for such a high risk venture.

Jan 1, 1996

By Paul C. Rusanowski

Mining is a waste intensive industry, oftentimes producing hundreds of kilograms of waste rock and tailings for every gram of metal recovered. Disposal of mine tailings is a major concern in most mining operations. In Southeast Alaska the steep terrain and high seismic hazard province limits cost effective opportunities for land disposal of tailings. The lack of infrastructure and long travel distances generally limits secondary utilization of tailings, as well. Since the mines are located close to tidewater, submarine tailings disposal is an attractive option for tailings management. At the present time the EPA will not issue a permit that authorized marine tailings disposal from any mining process that includes flotation technology. Upland disposal is the "Best available technology" and must be used. Consideration of submarine disposal is generally precluded because the tailings are contaminated with fluids from the flotation process. However, when developing technological solutions to minimize environmental disturbance, destruction, pollution, and risk, submarine tailings disposal deserves another evaluation. In Southeast Alaska it may be the "Best available technology" based on an assessment of all issues and concerns in these mining projects.

Jan 1, 1991

By N. R. Ayupova

Several metallogenic zones including Sakmara, Magnitogorsk, and East-Ural zones were revealed in the Ural fold belt (Fig. 1). These zones are considered to be the paleogeodinamic sectors corresponding to marginal sea, island arc system, and uplift respectively. Ferruginous-manganiferous sediments in the Southern Urals are hosted by the basalt-rich volcano-sedimentary series of the Magnitogorsk paleoisland arc system with West- and East Magnitogorsk island arcs and Sibai inter-arc basin. The manganiferous mineralization occurs in association with the Middle Devonian stratabound hematite-quartz rocks and bedded red jaspers localized on the foot or handing walls of massive sulfide deposits. Fe-Mn nodules are widespread in jasper horizons on the flanks of manganese deposits. We have studied Fe-Mn nodules from the Faizulino and Yanzigitovo Mn-deposits formed in the Sibai inter-arc basin and compared them with well known Fe-Mn nodules from modern oceans.

Jan 1, 2010

By Andrea Koschinsky

Recent technological breakthroughs in the fields of ceramics, medicine, aerospace engineering and electronics (semi- and superconductors) are constantly creating new uses and an ongoing increasing demand for a variety of rare valuable trace metals. These so-called high-tech elements such as hafnium (Hf), titanium (Ti,) niobium (Nb), tantalum (Ta), zirconium (Zr), molybdenum (Mo), vanadium (V) and the rare earth elements (REE), many of them of strategic importance, occur inter alia at elevated and potentially economic concentrations in marine ferromanganese nodules and ferromanganese crusts, making those deep sea deposits potential future resources of these metals. As these metals are mostly present in the lattice of the manganese and iron phases, which are strongly intergrown, rather than in separate mineral phases within the nodules and crusts (Koschinsky and Hein, 2003), reductive dissolution of the host phases is a prerequisite to release and dissolve the valuable metals. To evaluate the association of these rare valuable metals with their mineral carrier phases, sequential leaching experiments were carried out on selected samples in a first step in our project.

Jan 1, 2011

By Porter Hoagland

It is well known that significant quantities of mineral deposits exist in the oceans. Most of these resources cannot yet be classified as economic "reserves" in the strict sense of the term, but they serve as backstops to deposits of identical minerals produced onshore. The prospects for the commercialization of ocean mineral resources will depend upon factors affecting both supply and demand, including, among other things, changes in consumption patterns, technological developments, new discoveries, developments in markets for complements and substitutes, and environmental regulation. In this presentation, we examine broad trends in mineral prices, as one of the most summary measures of the prospects for the commercialization of ocean minerals. Further, we report on any recent developments in the relevant product markets that may affect the potential for commercialization.

Jan 1, 1996