Search Documents

The ninth annual Mine Rescue Evaluation was held in conjunction with the RMCMI 2000 convention at the Sheraton Tamarron Resort, Durango, Colorado June 25 thru 27. The purpose of the mine rescue evaluation program is to provide an opportunity for mine rescue teams to learn new skills and improve their existing ones in a non-competitive environment. Several staged "disaster" scenarios were [ ] held where the teams are called upon to exhibit their life saving abilities. The evaluators meanwhile are offering suggestions, both verbal and written, to help the teams better understand the situations presented them. This non-competitive environment allows the teams to work together and share their knowledge with fellow mine rescue teams providing everyone with a positive learning experience. Mine Rescue Chairman Bill Balaz was in charge of coordinating the events. Seven teams consisting of seven to ten members each (totaling 63 members) participated in the two-day event. Each team was required to respond to three different real-life scenarios plus a written general knowledge test daily. This year's four professional evaluators included Art Saenz (Hazardous Materials) of Western Envi¬ronmental Associates; Guy Horton (Ropes), Guy Horton Rope Rescue; Mary Bailey (Medical), MBA Training and Ron Lauer (Confined Space) also lassos Western Environmental Associates. They cash prov- [ ] ided three different challenging mock situations per day per team. The teams had no prior knowledge of what the scenarios would be as details were provided only as they arrived. Ten volunteer victims added much drama and excitement to the event. Their realistic enactments, complete with false blood makeup and severed limbs, made for some very tense scenarios. The Mine Rescue Teams participating this year were BHP LaPlata, BHP Navajo, BHP San Juan, all from Farmington, New Mexico; Bridger Coal Co., Rock Springs, Wyoming; Sabine Mining, Longview, Texas; Solvay Minerals, Green River, Wyoming and Western Energy Co., Colstrip, Montana. Many new [ ] friendships were made and much knowledge shared. A swap meet was held Saturday afternoon for the teams to exchange miscellaneous equipment, hats, shirts, etc. The teams were asked to evaluate the program and the evaluators. Then responded with many positive suggestions that will help improve the upcoming events in the years to come. Culmination of the Mine Rescue program was a Tuesday morning awards breakfast where the teams were presented with plaques. The participating victims and evaluators were also commended for their outstanding efforts. Sponsors for the Mine Rescue program were Big Sky Coal Company, CMC Rescue, Magnum Metals, Inc., and Rocky Mountain Electric. Many hours of volunteer time and effort from various family members of participants helped make the 2000 event a huge success.

Jan 1, 2000

By Eugene McAuliffe

The subject of my few remarks addressed to the Rocky Mountain Coal Mining Institute, "Guessing or Knowing! Which," may perhaps suggest but little to you here today. However, I am sure you will all agree with me when I say that in the conduct of a coal mining operation there should be no choice between guessing and knowing. The value of, and the results to be obtained from this Institute, its meetings and printed transactions, as well as those of other similar educational organizations, depend very largely on the mental attitude of those who constitute, through their pronouncements, the more active portion of the membership. Perhaps the most apt criticism that is now being made of the coal industry is that, to an extent possibly exceeding any other industry of similar magnitude and importance, it depends for its conduct altogether too much on "rule of thumb" and "tradition," rather than on proven practice and actual fact. The records of our coal mining association meetings bear expression of many conflicting opinions, the majority of which are sincerely put forth by those expressing same as representing the facts; the extremes expressed, however, frequently fix the question raised as one yet located in "no man's land." There are yet too many chances taken we are still "weighing pounds on railroad track scales" and measuring yards with the proverbial "bit of string." The actual expense of conducting any one of the several operations incident to the production of coal is rarely determined, and in many instances the general cost figures, prepared some weeks after the work is complete, are of that sweeping character that very little can be abstracted therefrom. Many coal companies are now making a daily cost sheet, showing the cost of labor and material in detail, as used in the several related operations,, and such is decidedly helpful, particularly to the mine superintendent and his foreman, who, without such, sail an uncharted sea; the auditor's belated monthly summary rarely ever seen by these men who are held responsible for the labor and material used. I have made reference to this situation as an accentuation of the fact that the coal industry contains more "serious minded, conscientious guessers" than does any other similar industry, although the annual cost of our product runs up well beyond the billion dollar mark, and what is more important, our industry is one that still continues to exact a heavy toll of human life. Now this brings me to the question of safety, the one question that should be, and which is, I know, uppermost in your minds. The coal mining world, engineering and operating, is now well sold on at least two things the theory of using permissible explosives and the elimination of the open light. Furthermore, the industry, particularly that portion which is located in Great Britain and the United States and Canada, are now planning vast extensions of the use of "rock" or "shale dust," both in the form of "dust barriers" and in "direct application" to entries and cross-cuts. This is well; however,, my study of past mine explosions has convinced me that the great majority of such had their very beginning in gas accumulations; frequently originating in restricted areas at the working face, in abandoned worked-out areas, or in some other certain place where ventilation is not, maintained as it should be; and that again leads me to the point where it can again be well said, that there is too much "rule of thumb," too much guessing now being done in regard to the volume of air required, and continuously furnished, in a given entry,, panel, room or area. Just to emphasize this situation, is it not a fact that the majority of mine inspectors express the ventilation conditions as measured by them, in terms of cubic feet per man employed, in each certain split, and does not the mining laws of many states yet demand a minimum of "100 or 150 cubic feet

Jan 1, 1924

By F. A. Young

A description of the dry process coal cleaning plant which has been built and operated by St. Louis, Rocky Mountain & Pacific Company at their mine at Brilliant, New Mexico, should at first be a description of the special machinery which is used in this process. This equipment consists primarily of screens for sizing the coal into six different sizes all smaller than 1 ½ inch and the pneumatic machines for cleaning each size. These machines are patented and were manufactured by Sutton, Steele & Steele of Dallas, Texas, until a few months ago when all rights of sale were acquired by the American Coal Cleaning Corporation. These screens, a plan of which is now before you, are called anti-gravity screens because the coal travels up hill. The screens which we have at Brilliant are 3 feet wide and 7 feet 4 inches long. They consist of one upper deck which slopes upward in the direction of the flow of the coal, at an angle of 12 degrees. This deck is a wire mesh screen the size of which determines the size of oversize from that screen. Under this is a lower deck with a slope of 7 degrees. This is a solid bottom and is for advancing the undersize to the next screen. On account of the difference in pitch of these decks they are about 11 inches apart at the discharge end, which allows the oversize to be taken off at one or both sides and the undersize to fall only a few inches on to the following screen. This is perhaps the most valuable point in this patent as it allows any number of screens to be placed on a-level floor, tandem in a battery without elevating or rehandling the coal in any way. The length of the screens corresponds to the proper spacing of the cleaning tables which naturally operate on the floor below. I know of no other screen which can be operated in this way. The coal is caused to travel by a reciprocating motion. A shaft as shown near the center of the screen box and under it has an eccentric at each side of the screen with connecting rods attached near the rear of the screen box. The screen box is attached to the stationary under frame by means of cast iron plates extending full width across the screen box. These are placed at an angle as shown so that the forward motion of the eccentrics causes the screen box to rise as it moves forward and the backward motion drops the screen from under the coal thereby causing it to advance. The coal advancing over the screen cloth in this rolling or jumping motion causes very perfect sizing. It should be stated here that very accurate sizing is necessary for the success of the cleaning tables. The stroke is 1 inch and the speed 350 revolutions per minute. In describing the pneumatic cleaning table, I place before you a plan furnished by the makers. The basic principle is that if a film of coal one to two inches thick and all of nearly the same size pieces is placed on a flat perforated surface and a large volume of air passed through it, the lighter particles which are the clean coal will soon find their way to the top of the film, while the heavier particles, or waste, will remain on the bottom. The machine is built with a perforated deck about 4 feet square under which is an air chamber and air duct connecting with a fan which is part of the machine. The deck of the table has a reciprocating motion the same as the screens already described, which tends to advance the product up a slight slope which is adjustable. The coal is fed at one corner of the table as shown and the deck slopes also away from the feed and at right angles to the reciprocating motion. On top of the perforated deck are riffles about 2 inches apart and running parallel to the line of reciprocating motion. These riffles are about 1/2 inch high at the fan and feed side of the table and taper to nothing at the far side. When the coal is fed on to the table, the air through the perforations tends to raise it 'and roll it over these riffles down the slope toward the clean coal discharge. The heavier particles do not get over the riffles so rapidly and the reciprocating motion is constantly pushing them

Jan 1, 1923

Jan 1, 1986

Robert M. Magraw John W. Roshold Thomas H. O'Brien Joe Mann Walter M. Dake E. P. Lucas "How well they fell asleep Like some proud river, widening toward the sea; Calmly and grandly, silently and deep. Life joined Eternity."

Jan 1, 1948

Jan 1, 1925

Jan 1, 1987

[ ] RMCMI PRESIDENT 1985 - 1986 ARTHUR K. NEILL on behalf of The RMCMI Board of Directors and Officers invites you and your family to attend The 82nd Regular Meeting and Convention of The Rocky Mountain Coal Mining Institute to be held JUNE 29, 30 AND JULY 1, 1986 Kalispell, Montana

Jan 1, 1985

Jan 1, 1923

[Participating Scholarship Colleges and Universities 148 Andalex Resources, Inc 99 Big Sky Coal Company 118 Canyon Fuel Company, LLC 100 Coal Age 141 Commercial Testing & Engineering Company 103 Continental Conveyor & Equipment Co 104 Copper Mountain Resort 139 Cove Shoe Co., Inc 116, 117 Dakota Coal Company 105]

Jan 1, 2000

Jan 1, 1926

?Go for the Coal? Simulator Training Outline ?Training Adult Learners ?Benefits of Simulator Training ?Simulator Training at Kennecott Energy -Training Priorities -Data Utilization ?Questions

Jan 1, 2004

PRESIDENT LITTLEJOHN: Until Mr. Wood comes back, we have a gentleman with us who has been sitting in one of the back seats. He has never gotten up and showed himself, and I think we ought to call on Mr. Ryan to stand up and say two words, or a half dozen words. Mr. Ryan! (Applause.)

Jan 1, 1925

The Institute thanks the following for their invaluable assistance, not only in assisting of the planning and organizing for the Vail meeting, but also for their tireless effort in transcribing, editing and processing the various speeches for these proceedings: Elizabeth Sturges-Murray Executive Assistant to the President Western Mining Operations W. R. Grace & Co. Jacklyn Grove Office Supervisor Mining Division W. R. Grace & Co Donna Hollister Further, the Institute announces the appointment of Doris G. Finnie as Secretary-Treasurer. Formerly Office Manager of K&P SALES ENGINEERS, INC., Doris has assisted for the past 15 years in registration for RMCMI. The Institute has opened an office at 777 Nile Street - Suite C Golden, CO 8040 1. Phone her at 3031278-1912 with any changes, corrections or suggestions.

Jan 1, 1982

Jan 1, 1992

MR. MARGOLF: Our final speaker this afternoon before we have an opportunity for some questions for the members of the panel, is a gentleman who has spent more than 40 years in the newspaper industry. He started out as an office boy while he was still in high school. He worked his way through college working for a newspaper in Lexington, Kentucky where he graduated from the University. He has a long association with the Albuquerque Tribune but what brings him here today is in his position as editor of The Rocky Mountain News which is certainly one of our largest circulations. I think it is the largest circulation newspaper in the Rocky Mountain states. Ralph Looney, in that

Jan 1, 1982

ACM Equipment Sales Co. ACM/ICM Andalex Resources, Inc. ARCO Coal Company Behre Dolbear & Company, Inc. Coastal State Energy Company Colowyo Coal Co. L.P. Commercial Testing & Engineering Company Continental Conveyor & Equipment Company Crane & Hoist Cyprus Amax Coal Company Dakota Coal Company Driltech Inc. Empire Machinery Energy West Mining Company Fleischli Oil Company Inc. Halbach & Braun Industries Hemscheidt Corporation GH Hensley Industries Ingersoll-Rand Company Jennmar Corporation Joy Technologies, Inc. K & P Sales Engineers, Inc. Kennametal, Inc. Kerr-McGee Coal Corporation LeTourneau,Inc. Long-Airdox Company Magnum Metals, Inc. McLanahan Corporation Morgantown Machine & Hydraulics Morrison Knudsen Corporation National Mining Association The North American Coal Corporation Peabody Coal Company Phillips Machine Services, Inc. Pincock Allen & Holt Powder River Coal Co. Ramsey Technology, Inc. Rust Tractor Company Salt River Project Savage Industries Inc. Stamler Corporation Tamarron Resort TerraMatrix Inc. Texaco Lubricants Company TIC (The Industrial Company Wyoming, Inc.) Trapper Mining Inc. Wagner Equipment Comp any Western Energy Company Wheeler Machinery Company

Jan 1, 1995

Jan 1, 1929

By Kirk Nobis

Develop a Risk Management Plan for Your Mine ? Why? ? Measuring ? Managing ? Conclusion

Jan 1, 2006

Jan 1, 1935