Search Documents

By Brandon Buschmeier, Frederic Masse

"Inclusions are a type of ground improvement that provide an improvement of a soil mass by insertion of a material with better characteristics than the surrounding soils. There are primarily two types of inclusions: “Soft” inclusions which are constructed of granular material (Stone Columns, Rammed Aggregate Piers, VibroPiers...), and “rigid” inclusions which are constructed of grout inserted with or without pressure (VibroConcrete Columns, Controlled Modulus Columns, Soil Mixing Columns).While the central principle of the inclusions is similar (i.e., overall improvement of characteristics of the soil mass below the structure), the load transfer mechanism is radically different for each technique. Therefore, the applicable design methodology is specific to the type of inclusions and there exists no universal method of design which spans across all inclusions.This paper will present an in-depth comparison between the standard design methods used for “soft” granular-type inclusions (Priebe modified, Balaam & Booker, Goughnour & Bayuk...) and the methods used for “rigid” inclusions which mainly rely on finite element analysis. The paper will explain why the design for soft inclusion methods cannot be applied to rigid inclusions and vice-versa. Each design method will be reviewed in detail to better emphasize its limitations and advantages.Two case histories will also be presented; one for each type of inclusions in order to illustrate the concepts developed in the first part of the paper.1 INTRODUCTION1.1 GENERAL OVERVIEW OF GROUND IMPROVEMENT WITH INCLUSIONSThe use of ground improvement methods to provide the appropriate amount of foundation support is a growing and constantly evolving industry. Traditional structural foundation methods including ‘shallow’ and ‘deep’ foundations do not adequately address the wide range of settlement tolerances, soil conditions, and loading considerations inherent to each unique potential project. In some instances, ‘shallow’ foundation solutions are simply not feasible due to soil and loading constraints. Furthermore, ‘deep’ foundation solutions are used to ‘bridge’ the soft compressible soils, ensuring that the entirety of the load in the structure is transmitted through individual elements into competent layers below the ground surface (bedrock, dense residual soils). Highly concentrated structural loads are transferred into the individual elements by means of direct contact requiring the use of structurally rigid surficial components (structural slabs, grade beams, and pile caps).Ground improvement bridges the gap between these two traditional methods, offering adequate foundation support while using more costeffective techniques and design methodologies. Inclusions are a type of ground improvement used to provide a reinforcement of the soil mass through the vertical insertion of a material with better characteristics than the surrounding soils. Much like deep foundations, inclusions are installed through soil layers with high compressibility and/or low bearing capacity and terminated in a suitable bearing stratum. However, unlike deep foundations, ground improvement inclusions rely on a distribution of load between the soil and the inclusions. By doing so, some of the structural load is applied directly to the soil in a proportion equal to its bearing capacity and compressibility limits, while the rest of the load is shed into the vertical inclusions down to the bearing stratum. Load sharing is a critical aspect in the performance and design of the various ground improvement methods."

Jan 1, 2015

It was said that the coal operators are losing a great advantage in permitting the oil producers to take the domestic market away from them. Coal is so much less expensive and more economical than oil that even the oil producers themselves are burning coal under their stills. No longer is the housewife afraid of machinery. Not only does she operate an automobile, but in her home she is used to vacuum sweepers, washing machines, refrigerators, and multitudinous devices. She is no longer machine-shy. An electrically operated stoker, if properly introduced and guaranteed with only a fraction of the enthusiasm that the oil furnace salesman shows, would get a ready reception. Several devices now on the market are much less complicated, much less apt to get out of order, than the oil burners. In place of an increased cost for the sake of convenience, the stoker will give all this convenience at a decreased cost. So said Mr. Herres. He said, however, that it must be enclosed so that the working parts are not too much in evidence. MR. McAULIFFE: While it appears possible to adapt a continuous feed to the needs of the furnace in an apartment or a house burning thirty tons or more annually, it is not yet possible to get a furnace that would satisfy the home which burns only seven or eight tons in a season. A delegate described the Garrison stoker which is designed to care for this problem. Mr. Herres said that the Pacific Coal Company had a small stoker furnace more simple than the Harrington. Pulverized coal equipment is being adapted to use in apartment houses. The stoker designed by Lloyd Garrison, State Engineer of Utah, was described, and also one which Mr. G. W. Megeath of Omaha, Nebraska, had manufactured, which Mr. McAuliffe says, is recommended only for Rock Springs coal. It was brought out that there are over forty installations of the "Iran Fireman" in Salt Lake City. For apartment buildings, there is no question as to their satisfaction. Many of the down town office buildings are so heated.

Jan 1, 1925

Remarks Of Mr. Robert W. Hunt, General Superintendent, Albany And Rensselaer Iron And Steel Company., Troy N. Y. - In discussing Dr. Dudley's two most interesting papers, I feel a natural hesitancy in disagreeing with conclusions formed after such careful and conscientious work. But I think he has made his deductions from too meagre premises. The analyses of but twenty-five samples are entirely too few to justify the establishment of so important a formula. When we consider that he indirectly proposes to regulate an interest amounting, even at the present low prices, to over $20,000,000 per annum, we may well hesitate before accepting a formula based upon the chemical and physical analyses of but twenty-five steel rails. Dr. Dudley touches the keynote in referring to the proposed labors of the Government Test Commission. They based their hopes of attaining success upon the chemical and physical analyses of a very large number of samples, and in the only branch of investigation which the short-sighted policy of Congress has allowed them to complete, i.e., chain cables, we find that a dozen, twenty-five or one hundred tests gave no satisfactory results. It was only after many hundreds that they were enabled to draw conclusions. There are so many circumstances bearing upon the life of a rail, that the task of extracting a correct result seems herculean. I presume I am right in stating that in our Northern latitudes early winter and spring months witness the breaking of the greatest number of rails, thus seeming to prove that an unstable road-bed has much to answer for. Then, again, broken and flattened wheels must be taken into account, but I am convinced that more rails have been broken by the treatment which they received before leaving the rolling-mill * The remarks of the participants in this debate have been written out by the speakers, and are here given without any attempt to retain the order of the dis¬cussion. While the report does not, therefore, preserve the vigor and spontaneity of the debate, it is believed that it gains in value by giving the matured views of the speakers. The continuation of this discussion at the Pittsburgh Meeting, May, 1879 (beginning with remarks of Mr. Cloud on page 401), is appended for convenience of reference.-T. M. D., Sec'y

Jan 1, 1879

William P. Blake, TUCSON, Ariz. (communication to the Secretary): As one who in youth, now nearly half a century ago, had the privilege of participating in the initial explorations which have alreacly resulted, within a single lifetime, in the establishment and Development of a vast continental empire, so well described by Dr. Douglas, I may be permitted to supplement with some additional details the comprehensive sketch given in his paper. Before the War Department, in 1853, sent out the Pacific railroad exploring parties, Fremont had already made his memorable expeditions, exploring the Great Basin and the passes into California; Sitgreaves had traversed, from east to west, the Zuni and Moqui country; and, still later, Emory had examined the region along the boundary-line between the United States and Mexico. The services of these pioneers deserve to be mentioned in even an outline of the history of continental development. Concerning the five practicable railroad-routes, suggested in the Reports of Explorations aid Surveys," etc., as published

Jan 1, 1900

Edward Keller, Baltimore, Md. (communication to the Secretary): When, at the New Pork meeting, February, 1899, Mr. Douglas gave an abstract of his highly interesting paper on the Copper Queen mine, he invited the members of the Institute, in his usual progressive spirit, to make a full scientific investigation of the region of that mine during the prospective excursion to Bisbee, Arizona. I volunteered to examine some of the metallurgical processes and products of the works, and obtained from Mr. Douglas a valuable series of samples. Upon the issue of his paper, however, I found that he had already a considerable volume of analyses of those products, and that little was left for me to do in that respect, except to duplicate his results, the importance of which work would not have been commensurate to the time and labor involved. I selected, therefore, only some points which he had not made entirely clear, or concerning which I was skeptical. The details of most of my work will appear in a future paper. From Mr. Douglas's figures I have calculated the values for the elimination of impurities in the so-called Leghorn converter, introduced by him at the Copper Queen works, and have found them to be as follows: Percentage of Elimination of Impurities in Pour Blows of a Converter. No of ' Selenium Sulph'r Iron. Zinc. I Nickel. Lead. Antimony Arsenic. and Blow- ! Tellurium .. 1.......... 99.4 99.6 88.0 92.6 94.4 81.6 83.8 40.3 2.......... 99.0 99.6 98.1 92.5 96.8 71.9 76.6 38.1 3.......... 98.8 99.5 93.5 91.4 96.3 63.8 80.6 25.3 4.......... 99.8 99.5 95.8 95.8 97.5 65.3 76.9 36.3 Average 99.2 99.6 93.8 93.1 . 96.2 70.6 ! 79.5 35.0

Jan 1, 1900

By Hickling G.

Discussion at the Manchester Geological and Mining Society' general meeting held in Manchester, March 14th , 1916, with Leonard R. Fletcher, President, in the Chair, of a paper published in Trans. Inst. M. E., 1915, vol. L., p.328 and 1916, vol. LI., p.91 comprised a written contribution by Faulds A.

Dec 1, 1916

By Hickling G.

Discussion at the Manchester Geological and Mining Society's general meeting held in Manchester, February 8th 1916, with Mr. Leonard R. Fletcher, President, in the chair, of papers previously published in Trans. Inst. Min. Engrs.,1915, vol. L, p.322 and p.328. Included are a written contribution by Ollerenshaw W. and oral discussion by the author, Gerrard J., Paton J.D., Smith S.A., Stephenson H., Dixon H.O., Pickup W., Fletcher L.R. and Atherton H.S.

Dec 1, 1916

CONCLUSIONS: Our experience, where we attempt to remove a continuous face with a seam more than six and one-half feet in thickness, has been rather disastrous. We have been able to open up faces and retreat for a distance of 75 to 100 feet in this particular character of coal, but after the supporting timbers have been removed for the second or third time we have found that the roof has a tendency to ride over the props and break off at the face of the coal support. However, where our coal is below six and one-half feet in thickness we have had very good success in handling the roof and breaking it off systematically with our break line of props, which are usually from 12 to 15 feet from the face of the coal. Our practice in to set props at about two-foot intervals in each direction and remove two sets of props, at the same time two additional sets are placed along the coal face. At all times we are very insistent that all props be removed from the gob and that entire coal be taken out so that it is possible for the roof to break freely and all come down, not having any supporting pillars in the gob. The conclusion of our experiments to date is that if all the supports beyond the breaking line of props are taken out as the long face retreats and the closer the breaking line of props is kept to the face the better the results will be. We have never felt it safe to have less than four rows of props to protect the machinery and men working along the coal face. We feel that the time element as to the rapidity with which these faces are advanced or retreated, is of vast importance, but to date have not had an opportunity or experience enough to reach any conclusion as to what time element is proper here with us. We feel that the crushing strength of the overlying strata will govern this to a large extent, and as ours varies considerably, it is going to he very difficult for us to reach a definite conclusion. My opinion is, that conditions may be such that rather than have a short face and retreat rapidly, it will be found that a longer facewith a slower retreat will work out better. Such a condition might give the overlying strata time to settle. The caving of roof or of control of this caving, with us, is quite closely associated with the ventilation. We find that the places where the strata overlying the coal are composed of shale, that the effect of the air on this is of very great importance. It is our endeavor, at all times, not only to remove obnoxious gases, but to keep a current of fresh air moving along the face and, of course, a portion of this travels over the gob and comes in contact with the roof and overlying strata. This, we find, helps materially in keeping the roof on the move. As it is our practice to keep water for sprinkling purposes at all places, we also use this water to keep the roof wet back in the gob. The effect of water on the shale is to cause it to disintegrate quite rapidly. MR. HOLMAN (Concluding): If there are any questions about this, I will be glad to answer them. I have some prints and also some pictures of the scraper loader and the shaking conveyors (distributes.) PRESIDENT MOSES: We wish to thank you, Mr. Holman, and also wish that you would thank Mr. Dupont for his paper. Are there any discussions? Do you wish to ask Mr. Holman any questions? (No response.) PRESIDENT MOSES: Mr. Holman, I would like to ask you how you take the photographs; were they taken by flashlight, or were globes used, or how were they taken, in a gaseous mine? MR. HOLMAN: Our mines being gaseous, we do not use the ordinary flashlight for taking underground photographs, but we have had considerable success, I think, with underground pictures by means of electric lights. We use 250 watt globes. We have six of these rigged up with tin reflectors, 18 inches in diameter, on standards, and we carry two or three hundred feet of wire connected with these six lights, and they can be turned on in the room where we take the photograph, by means of this extra wire. We set the kodak up and arrange the picture and take a long time-exposure. We usually take an

Jan 1, 1926

MR. SHUBART: Mr. Miller's paper mentioned the two processes that seemed to be a success, the Smith process and the Piron process. I suppose the main difference is this, that Smith's process is to furnish domestic fuel and the by-products while the Piron process that Ford is installing is for fuel for power plants. I would like to ask Mr. Miller something about the commercial cost of the process. With the briquette you must make it cheap enough to sell. What are the commercial possibilities of Smith's briquette? MR. MILLER: It is pretty hard to say what the cost would be at this time, owing to the fact that slack has advanced double, or even more at the time I was in New York with the plant, but at that time it was costing $1.10 for the operation. You can add to that, of course, the cost of the coke. One dollar and ten cents was the entire cost of plant operation. It takes about one and one-half tons of coal to make a ton of briquettes. One dollar and ten cents takes care of all the material, cost, labor, handling, etc. Labor was much cheaper then. I would say it would cost about $2.20 now. The cost of coal is what you can buy it for on the market. I don't think, however, that the carbocoal process will ever meet with any great favor for the simple reason that it is really a prepared fancy fuel. It is going to be nice for people in offices where they want a grate or for families where they want a nice clean fuel. It leaves no stain on the fingers, no odor to it. It seems in carbonizing coal we change the carbon molecule. For instance, we are all familiar with the diamond. It is carbon, yet it requires a tremendous heat to burn a common little diamond. But you can set a piece of charcoal afire, which is also carbon, with a match. The molecular form has been changed in carbonizing coal, i. e., it is larger. Carbocoal will fire very readily, it can be started with a piece' of paper. I think the Piron process will be the process, i. e., to simply take out the tars and light oils, then fire direct-have the distillate plants right on the job. CHAIR: Can Mr. Shubart tell us something of the mechanical part of the Piron process? MR. SHUBART: The Piron process is of interest because Mr. Ford is taking it up. He has made so few mechanical mistakes it makes us feel that it is a success. Piron is a chemist of high accomplishment and reputation. The thing about the proces is its simplicity. Mr. Smith's is a very elaborate process, but Piron has gotten around all that. Piron feeds the raw coal in at about one-half inch mesh or smaller. He feeds it into a retort about 55 feet long, 16 feet wide over all. He has a hearth about 6 feet wide and the length of the retort. The base of the hearth that carries the coal is a conveyor, a flat cast iron conveyor, a very massive affair, very accurately made, so that there is no loss of coal. Between the upper and lower strands of the ' conveyor is a bath of molten lead which gives an accurate control of temperature. For best results he must have temperature of not under 800 F., not over 1,300 degrees F., about 1,100 or 1,200 F. seems to be ideal for getting greatest yield of oils and the best tars and other by-products. This lead bath has a system of flues running through it that

Jan 1, 1923

Mr. Shepard's paper was unfortunately delivered extemperaneously so no record is at hand. He spoke most interestingly and at length on the oil shales of Colorado, giving his opinion as to the ultimate outcome of the oil shale industry. He explained his idea that it would be built up of comparatively small plants, each of which would make the crudes, or more exactly would roughly divide the crude into its fractions, piping or shipping the fractions to a Central Refinery, using the residue for fertilizer, as it runs very high in fertilizer salts. He recommended that this plan be taken up by Coal Producers, that they consider the possibility of breaking up coal and selling its more refined products in place of selling raw coal. He spoke at length of the various outlets for products of distillation. Mr. McDermott gave a very interesting talk later on work that is being done in the Northern Colorado field along these lines. Mr. McDermott mentioned the strange fact that coaly materials such as mother of coal appeared to give just as good or better results under distillation than did lignite coal. Messrs. Randall, Howe, Goddard, Danford, and Nash added interesting data covering the use of pulverized fuel, and this data will be collected and offered to the Institute later in the form of a paper. Mr. Young spoke of the use of powdered coal in small units for small plants, mentioning the system now being offered by an Eastern Iron Works for small heating plants.

Jan 1, 1922

A great many questions were asked Mr. Bright, and Mr. Bright's opinion was given on a number of subjects. He spoke at length on spring suspension of locomotives, bringing out the necessity for better spring suspension due to heavier weights and higher speeds now developed. The subject of dynamic braking was brought up, and the opinion of the engineers present was that dynamic braking was not a desirable feature except where heavy, long, adverse grade is encountered. Mr. Goddard and Mr. Bright had a spirited discussion regarding ball bearings, bringing out the opinion of the meeting that ball bearings in motors are preferable to sleeve bearings, and the few failures so far encountered are due to improper application or insufficient size of bearing. Mr. Shubart brought up the question of locomotive speed, mentioning some high speed work on main haulage, also an interesting experiment in a large Eastern mine where very slow speed, 3 1/2 miles per hour, gathering locomotives were substituted for the high speed gathering locomotives with an increase in cars gathered and a material decrease in derailment and accident. Mr. Bright mentioned the improvement in gathering reels, and Mr. Shubart mentioned the safety in the use of the concentric cable in direct current, using the outer wire as the ground wire, so that in case of accident to the cable, the ground wire acted as a protector to the live wire, materially decreasing the danger of sparking. Mr. H. I. Smith of the Bureau of Mines brought up the question of explosion proof construction, and Mr.. Bright and. Mr. Shubart explained the construction adopted by two of the larger manufacturers. Experiment has shown that the force of explosion in motors due to gas does not exceed 150 pounds per square inch. All forms of screen or baffles have proven an actual source of danger, due to the collection of dust, usually soaked in oil, forming an active means of propagating flame, together with the fact that all these appendages are frequently left off when the motors are repaired. Modern construction eliminates all openings, screens, devices for stopping or extinguishing flame. The motor is made entirely enclosed, practically air tight, all joints are ground and all openings necessary for access and attention are closed by bolted plates. The case is made stout enough to withstand any interior explosions, and ample ribbing is provided for heat dissipation. Mr. Bright was asked regarding the use of contactor control. He replied that his company is now recommending contactor controls for series and parallel starting on all locomotives of 13 tons and over, and particularly on the tandem units that are now becoming popular in coal mining work. The question of dynamic braking and reversing was brought up and Mr. Bright explained that this made a very complicated contactor installation but they had

Jan 1, 1922

(Referring to map) If there are any methods to improve on this I would like to have some suggestions on it. The maps there are on a scale of one inch to two hundred feet. At the time of each extension a letter is used and a line drawn across the entry and the room. The date of the extension is given up in the margin of the map. Here is an extension made April 6th. Extension L is shown in each one of the rooms, November 29th. N-you see the two rooms have been finished down into here. 0-the last extension, has just been stopped, and the three working rooms. Now, one of the features of this plan, when the rooms have been stopped, the line is drawn straight across. When the room or entry is still going, there is a small projection beyond the line, indicating that the next cut is changed. When the distance cannot be ascertained by the engineer, he gets the distance from the mine boss or some other source which is reliable, and that is put on in a dotted line. That gives you a complete story. Anyone looking over the map can see immediately every place that was working at the time of this extension, every place that is inaccessible, and get a complete picture. The extension of the coal is put on the extension at each extension. The survey stations are put in, showing each survey point. The pillars when they are pulled-only the pillars that are pulled are cross-hatched. The whole map is in cross-hatch without any regard as to what pillars are pulled. If a little stump is left in, that is shown on the map. The engineer only shows what pillars are pulled that he has actual knowledge of, or has been given to him in detail by the mine foreman. I believe that concludes the work on the mine map, and there is certainly room for a lot of improvement on most of the mine maps which we have been getting into the office. PRESIDENT PRYDE: Does anyone want to ask any questions? Any questions about the leasing regulations? I want to say there are several leases in the Rock Springs field, and when Mr. Smith comes on one of his visits the Rock Springs Institute have asked him to address them on the leasing proposition.

Jan 1, 1924

D. HARRINGTON: Owing to lack of funds, the United States Bureau of Mines have made no experiments in the Bruceton mines in the use of mudite. MR. McAULIFFE: I doubt that mudite cam be delivered at fifty cents a ton and that a mile of heading can be treated with mudite for ten dollars. You could not dig a ton of sand out of a sand hank for that money. L. C. CLARE: The tram road leading to Wattis mine crosses a shale bed and it is easy to screen the shale through a %-inch sieve and load it into a mine car. W. J. REID: A slow trip passing through a mudited entry will dislodge practically no dust, a rapid trip will make air disturbance enough to coat the cars with fine dust. MR. PRYDE: We have used mudite on stoppings around a fire in Reliance and for two months thought they were getting good results, but the fire was found to be drawing air and to be spreading. This mudite was smeared over the stoppings with a trowel. After this apparently failed we used dry adobe.

Jan 1, 1925

McCulloch, Leon.-Experiments with Sherardizing. Discussed by Fred. L. Wolf, Willis M. Peirce, Jesse L. Jones, O. W. Storey, David R. Kellogg, William H. Finkeldey, L. H. Marshall 2 Bassett, W. H. and Davis, C. H.-Spectrum Analysis in an Industrial Laboratory. Discussed by C. S. Brainin, C. H. Davis, W. H. Bassett, George K. Burgess, George K. Elliott, Leonard Waldo, Keivin Burns 8 Roast, Harold J. and Pascoe, Charles F.-Arsenical Bearing Metals. Discussed by Jesse L. Jones, William A. Cowan,. William K. Frank, William M. Corse, Harold J. Roast 10 Bain, Edgar C.-Crystal Structure of Solid Solutions. Discussed by Ancel St. John, Edgar C. Bain, Paul D. Merica 14 Peirce, Willis M.-Studies on the Constitution of Binary Zinc-base Alloys. Discussed by George K. Burgess, Willis M. Peirce, D. H. Ingall, J. L. Haughton, K. E. Bingham 16 Webster, William R.-Application in Rolling of Effects of Carbon, Phosphorus and Manganese on Mechanical Properties of Steel. Discussed by George B. Waterhouse, J. O. Liebig, Ralph H. Sweetser, H. T. Morris, F. D. Carney, W. P. Barba, John H. Nelson, George K. Burgess 19 Barba, W. P. and Howe, Henry M.-Acid Open-hearth Process for Manufacture of Gun Steels and Fine Steels. Discussed by W. J. Priestley, Haakon Styri, C. T. Patterson, Harry Brearley, W. P. Barba, George F. Comstock, Alexander L. Feild 24 Kellogg, David R.-Electrolytic Deposition of Iron for Building up Worn or Undersized Parts. Discussed by Jesse L. Jones, William Blum, C. R. Hayward, George K. Burgess, C. P. Perin, David R. Kellogg 33 McQuaid, H. W. and Elm, E. W.-Effect of Quality of Steel on Case-carburizing Results. Discussed by H. J. French and L. Jordan, W. J. Priestley, M. H. Schmid, A. E. White, H. J. Stagg and S. C. Spalding, Henry S. Rawdon, J. S. Vanick 35 Phillips, Arthur and Davenport, E. S.-Malleableizing of White Cast Iron. Discussed by Samuel Epstein, H. A. Schwartz, A. E. White, R. S. Archer.... 58 Priestley, William J.-Effect of Sulfur and Oxides in Ordnance Steel. Discussed by Harry T. Morris, William J. Priestley, C. P. Perin, James H. Gray, W. P. Barba, Haakon Styri, Frank D. Carney, W. L. Harbrecht, George F. Comstock, E. J. Janitzky 67

Jan 5, 1922

PRESIDENT PRYDE: I am sure we have all listened with interest to the presentation of this subject. Anything that promises economy in coal mining today is welcomed by all of us. We will now have a discussion on this paper. If any of you gentlemen want to ask any questions, you may do so. I think we will develop something of interest and along the lines of economy. That is the first consideration of a coal mining man. MR. H. D. RANDALL: It is an interesting fact that in manufacturing we find the greatest economy results from giving a man the simplest possible act to perform, while there is nothing too complicated for a machine. If we want to put up a set screw we find it cheaper to let one man set it up and the other screw it in. The maximum economy is what we are after. Similarly, one of the points of greatest interest which Mr. Ickis has emphasized, is that this automatic equipment not merely dispenses with a manual operator, but also performs certain functions which the operator cannot do. It provides an inherent protection to the apparatus and service not possible under manual operation. We very rarely have cases of failure with these automatic equipments, .and consequently have the advantage not only of having eliminated the operator's salary, but also his mistakes. We have had a large number of these equipments in use for several years, so that their practicality is now thoroughly proven, and the trend of practice now indicates that the automatic idea will be further extended and will become universal for such classes of service. MR. D. C. McKEEHAN (Union Pacific Coal Company) : My notion of an automatic sub-station is one that does not necessarily require new equipment beyond the control equipment; so that any of you that are interested in it can take up with the manufacturers and find out how much it would cost to change any equipment. The greatest point I think is the fact it eliminates the several nationalities from operating the set, either on day shift or night shift. They can so lock the control as to make it impossible for anyone to start or stop it, except the one who has the authority. Another point I do not believe was brought out very clearly: It would be particularly advantageous to people who buy power, and if you could have several sets in parallel, it would allow you to start the shift with one set and cut in the additional sets as the shift progresses. There are various operations that stop at the end of each shift, and-one or two or three sets can be cut out, leaving the load on one set, providing the size of the copper is sufficient to supply all the points of the mine. Another point I want to bring out: In case you have quite a number of sets distributed along transmission line, the switch trips, the operation restores the service, and you may have several hundred-or in case with us, we would have several thousand-K. V. A. of Motor Generator Sets and Rotaries, that would be starting at once, and the switch would automatically trip out again. MR. RANDALL: Another form of control was described as the so-called supervisory control. This control could be started up so the starting would not be synchronous, but could be spread out over a sequence. MR. McKEEHAN: I think that is rather a theoretical consideration for coal miners. They are standing at the controller ready to shut it off unless there is some selective method of starting various sets- MR. RANDALL: I had in mind this supervisory control, one man, a central operator who would determine which station should start and he would take time enough to have his load come on gradually. He would not permit all the installations to come on simultaneously, but come on in succession: MR. McKEEHAN: You misunderstand me. Suppose we had the main switch at Rock Springs, which supplies several camps, and there are several

Jan 1, 1924

Secretary's Apology: Although every effort was made to secure efficient stenographers, the railroad conditions at the time made it impossible to get stenographers from Salt Lake City. Practically all of the discussion was therefore lost, and the Secretary's apologies are offered to those whose names and remarks we are unable to record. 'We are indebted to R. Dawson Hall of Coal Age for what we have been able to print. The question was asked why belt conveyors are not more generally used. BENEDICT SHUBART: Belt conveyors lack the ruggedness of metal conveyors and require more accurate alignment. They are much used in England though comparatively scarce here. The H. C. Frick Company's belt installation at Colonial mine is an unusual installation for unusual purposes. It is hardly main haulage, but is more comparable to railroad transportation. The belts are in long sections,, nine hundred to twenty-three hundred feet, there are no particular grades, only two turns, and the immense tonnage handled justifies a quality of installation that at this day would not prove economical in most mines. EUGENE McAULIFFE, Union Pacific Coal Co., Omaha: Was much impressed on learning at the American Mining Congress that the Hudson Coal Company had mined last year 1,500.000 tons of coal from a 36-inch bed and had transported this coal to the mine cars by scrapers and conveyors. He did not believe that because one or two percent of the men around the mines were opposed to loading machines, that it should be said that the mine workers were inimical to such labor saving means. He believes that when duly explained to them they could see the advantages of the equipment offered and would be friendly to its introduction. The Sheridan-Wyoming Coal Company at Sheridan have eight Goodman Hydraulic loaders in operation in rooms .with Joy loaders driving the headings. It is not possible for the mines which had to pay high wages to compete with those whose wage scales were lower unless by the introduction of loading machines. He received a letter from Dr. L. E. Young of St. Louis, general manager of the Union Collieries Company, that his two Goodman Hydraulic machines were loading an average of three hundred tons each daily. THE SECRETARY: H. N. Taylor, president, Sheridan-Wyoming Coal Company, said Mr. Green of the American Federation of Labor told him he would have no trouble with Union Labor, and, if any local disturbances were created, they would be stopped. The Union nationally is with the introduction of labor saving equipment. J. B. FORRESTER, General Superintendent. United States Fuel Company, Hiawatha. In his opinion metal conveyors are preferred because they can be lengthened and shortened at pleasure, and so can be operated with greater flexibility than belt conveyors. W. C. HOLMAN, Chief Engineer. Phelps Dodge Corp: The Phelps Dodge Corporation have two Jeffrey belt conveyors in tandem which obviates brushing where the coal is low. MR. E. O. WIEDERANDERS, Jeffrey Mfg. Co.: Says he has seen belt conveyors in use in England and is much taken with the idea. MR. WM. MOORHEAD, Phelps Dodge Corp.: Our conveyors are in twenty-foot sections, each with a motor. Three of them tandem make a sixty-foot face. GENERAL: There was discussion regarding the size of the coal produced by conveyors. It was said that when the Gunn-Quealy Company started their operations, the coal was very large, but now there is not so much care taken to produce large coal as the market is now demanding smaller coal. The Secretary said that the use of conveyors at the Kemmerer Coal Company's mine had almost doubled the percentage of lump coal. Mr. McAuliffe questioned

Jan 1, 1925

CHAIRMAN LITTLEJOHN: Some of the members will want to question Mr. Farnham on some of the things he has brought tip, so we will throw the meeting open for discussion. I am quite sure Mr. Farnham will be willing and glad to answer any questions that may be put to him. MR. HOLMAN: I would like to ask Mr. Farnham a question in regard to the Duckbill: How wide a face will it operate without moving the bill? MR. FARNHAM: The Duckbill is a device that was developed in the Union Pacific Mine at Rock Springs, within the last few months, and it is shaped something like, a dustpan, with discharge throat in the rear. They made one seven feet wide and found it was too wide, and the one they are using now is between three and four feet in width. The front section of the conveyor, which attaches to the duckbill, meshes into it to form a sliding section, and the front end of the Duckbill is pushed by the upper segments. I saw one used in a room twenty-four feet wide, and they drew it back after they cleaned out one room and pushed it forward again. MR. HOLMAN: You have no arrangement other than ratchet work? MR. FARNHAM: The ratchet is for forward working and back; the sections are made 12 or 13 feet long, and the stroke of the conveyor automatically works the ratchet; they can ratchet it back; it is a hand device. MR. HOLMAN: They just swing the end of the conveyor across the face to pick up the loose coal? MR. FARNHAM: Yes; they are also planning to use it endwise along the panel face, that and the room work both are quite new in their application, and I do not think the Union Pacific is giving out any results as yet, because the system has not been in use long. MR. HOLMAN: We are planning on putting one in very shortly. MR. HALL: I understand they can swing it over 30 degrees one way or the other, and it goes the same way easily because of the continual jar of the back and forward motion on a 60-degree swing. SECRETARY SHUBART: Take on a comparatively long conveyor, you can get quite a sweep, a large part of the circle. The Duckbill could command quite a large range. For a 12-foot entry, take a four-foot wide advance through the middle of the shot coal, with a 12-foot advance, ratchet back, swing the Duckbill to the rib and repeat; but I do not think they could get as much as 60 degree. on the end of the Duckbill without curving further back. The conveyor is light and not normally set on any permanent foundation. I saw one of Mr. McCarty's first machines, a rather rudimentary one, clean tip a 12-trot entry, 21 tons of coal, in 16 minutes, three men at the face and one at the loading end. MR. FARNHAM: The average time to clean the entries is about an hour-to clean up good-it wouldn't take but a short time; that is why they get this record of several cuts a shift. CHAIRMAN LITTLEJOHN: Are there any other questions you would like to ask Mr. Farnham? MR. HOLMAN: We were discussing this entry driving in regard to the entry loader; an entry loader in advance work, just what you have to do to place the jackbars with the sheave-blocks? Do you dig along the ribs after the coal is shot or do you have any other scheme that could be worked out to a good advantage? MR. FARNHAM: This record is a report I have just received from our Chicago office, without the full details, which I have written for. I am sorry I cannot give you the details. This was an Indiana or Pennsylvania mine, near Pocahontas, not the one where they had an accident. I assume they set the jacks ahead and swung and dumped the coal partly out with a scoop and partly by hand, but the application for that for entry driving is entirely new. The reports stated that they anticipated using that as a standard method of entry driving in the future. I will be glad to see that you get a copy of it when I get the report completed. MR. MONAY: Mr. Shubart, did you say they loaded 12 tons in 16 minutes? SECRETARY SHUBART: Twenty-one tons. MR. MONAY: How long did it take to change the machinery out of there

Jan 1, 1926

CONTENTS PAGE Rae, Colin C.-A Possible Origin of Oil. Discussed by S. Linker, Colin C. Rae... 2 Cottingham, Kenneth.-Subsurface Conditions on Portion of Arches Fork Anticline. Discussed by David B. Reger 6 Moyer, W. Irwin.-Time to Pay Out as a Basis for Valuation of Oil Properties. Discussed by H. J. Smith 9 Pogue, Joseph E.-Future Demands on Oil Industry of United States. Discussed by James O. Lewis 11 J. J. Walsh.-Coa-lmine Ventilation. Discussed by W. B. Daly, J. J. Walsh, R. R. Sayers, H. H. Stock, George S. Rice, James W. Paul, D. Harrington, T. D. Thomas 15 Longyear, Robert Davis.-Diamond-drill Sampling Methods. Discussed by Ira B. Joralemon, J. J. Rutledge, E. C. Harder 19 Joralemon, Ira B.-Sampling and Estimating Disseminated Copper Deposits. Discussed by J. Parke Channing, John E. Hodge, E.E. Hunner, B. B. Gottsberger, W. Y. Westervelt, W. O. Hotchkiss 20 Boericke, W. F.-Sampling and Estimating Zinc and Lead Orebodies in Mississippi Valley. Discussed by J. Parke Channing, Arthur Thacher 24 Daly, W. B. and Linforth, F. A.-Organization of Mine Sampling at Anaconda. Discussed by George A. Packard, W. B. Daly, B. B. Gottsberger 25 Norris, E. M. and Rahilly, H. J.-Mine Fires. Discussed by R. Dawson Hall, W. B. Daly, Frank Haas, D. Harrington, Robert E. Tally 26 Raymond, R. M.-Safety Practice for Hoisting Ropes. Discussed by B. F. Tillson, Graham Bright, Rudolph Kudlich, J. F. Howe, Robert Peele, H. G. Davis. 30 Howe, J. F.-Use of Wire Rope in Mining Operations. Discussed by Horace F. Lunt, J. F. Howe, B. F. Tillson 36 Tanner, W. N., and Jaccard, F. C.-Wire Rope and Safety in Hoisting at Butte Mines. Discussed by Horace F. Lunt, W. B. Daly, C. L. Colburn, William Kelly, Robert Peele, B. F. Tillson, Graham Bright, Charles E. Locke 38 Richardson, A. S.-Ventilation of Butte Mines of Anaconda Copper Mining Co. Discussed by D. Harrington, Chas. A. Mitke 42 Stuart, Charles E.-Storage-battery Locomotive as Applied to Mine Haulage. Discussed by Howard N. Eavenson, Charles E. Stuart, William Kelly, Arthur Thacher, W. H. Patton, Graham Bright 45 Woodward, C. D.-Electric Haulage Systems in Butte Mines. Discussed by William Kelly, Graham Bright, Howard N. Eavenson, C. E. Arnold, Gerard B. Rosenblatt, K. A. Pauly 47 Harrington, D.-Efficient Ventilation of Metal Mines. Discussed by R. E. Simpson 52 Otagawa, Masayuki.-Mining Methods at the Ashio Copper Mine. Discussed by Horace V. Winchell, D. W. Brunton 52 Stoek, H. H. and Clagett, Thomas H.-Coal Mining Methods. Discussed by P. D. Browning, G. L. Cox, Erskine Ramsay, Frank Haas, George S. Rice.

Jan 6, 1922

By Blatchford A. S.

Discussion at the North of England Institute of Mining and Mechanical Engineers' general meeting held in Newcastle-upon-Tyne, 3rd June 1916, on the paper published in Trans. I.Min.E., vol.LI, 1916, p.361-377, comprised written comments by Ashworth J. on the practicality of applying quenching materials to a dust cloud ahead of the explosion flame

Dec 1, 1916

By Dickinson C.

Discussion at the The Midland Counties Institution of Engineers' general meeting held in Nottingham on 6th May 1916, on the paper published in Trans. I.Min.E., vol.XLVIII, 1914, p.400, included brief oral contributions by Bragge G.S. and Hepplewhite W.H. with the author's responses regarding leakage and boring of cement into the coal

Dec 1, 1916