Search Documents

Exploration of a coal deposit provides the data on which a range of mine plans can be developed during project feasibility. The stages of exploration use methods and procedures which initially outline the deposit with more detailed data gathering and analysis of the specific site complexities. The in situ coal resource and reserves are calculated. The mine plan is a function of the mining method chosen and can have significant impact on the recoverable reserves. Other factors which can impact on the recovery of the reserves and the ability to maintain planned production levels are those which were either undetected during exploration or were misinterpreted. Exploration programs should be detailed enough to minimise to an acceptable standard the recognised and potential risks. Past programs which explored to achieve a minimum exploration density required to satisfy measured reserve status have generally proven to be inadequate, placing reserves and production at risk.

Jan 1, 1997

By Dobias B

A new separation method based on a combination of coagulation and colum flotation was used to treat fine sphalerite in the range 90 per cent - 15 pm with a relative high superfical gas velocity and a thick froth layer. Minerals studied include sphalerite, calcite, kaolinite and baryte. A new developed sedimentometer was used for sedimentation analysis to characterise hetercoagulation of mixture and coagulation after addition of active ions or reagents. A comparison between use of selective frother and depressant (SHMP) was made to deactivate activated minerals. Selectivity of frother for sphalerite was found in flotation test. The depression function of Flotanol for activated minerals was confirmed in sedimentation alalysis. The use of small quantities of HPAM can improve the flotation of fine sized sphalerite particle and reduce recovery of activated gangue minerals in the neutral or alkaline pulp. A satisfactory separation of fine sphalerite from its gangue was achieved by using alkylpolyglycolether (Flotanol) and copolymer polyacrylamide (HPAM hydrolysed polyacrylamide) as frothing and flocculating agents Respectively.

Jan 1, 1993

The cement industry requires large quan- tities of limestone, its main raw material. It is the major consumer of this mineral. Limestone is widely distributed throughout Australia but location in relation to major markets, and transport considerations render most deposits of no economic value. Of those which are sufficiently close to the major me- tropolitan markets many are rejected as being unsuitable on grounds of quality, inadequate size for major development, or other reasons such as environmental considerations. Detailed geological investigations are necessary, not only to prove raw material sources prior to establishment of a cement works but also to permit planned extraction programmes and satisfactory grade control during subsequent development. Conventional field techniques have generally proved adequate for raw material exploration. Data assessment and reserves estimation also are by conventional methods although the specific requirements of the industry relating to raw material and cement quality, the type of manufacturing process and fuel used are relevant. A number of case studies from different geological environ- ments are examined and comparisons made bet- ween the predictions of the exploration stage and subsequent experience in quarrying prac- Tice.

Jan 1, 1979

Anglo Platinum recognised with its expanded operations the need to change its evaluation strategy due to increased sample volumes and the pressure it created at laboratories. The sender/receiver analytical scenarios had to change in order to curb costs and to prevent substantial investments in new sampling and analytical facilities. Given the high cost associated with correct sampling systems and sampling protocols and the shortage of technical resources a strategy of single point sampling and analysis was introduced. The analysis was then done at an ISO17025 accredited laboratory with ten per cent checks, subjected to careful statistical scrutiny. Logistical problems increased with respect to weighbridge congestion, maintaining sampling quality, throughput of samples in the sample preparation areas, manual quality control systems in place, audit trails and analytical capacity throughout all operations. This required the expedited improvement of existing sampling practices and the development of new sampling methods and equipment. Anglo Platinum is classifying and standardising sampling equipment, sample preparation and analytical procedures for all process streams with the view to minimise overall uncertainties. Major investments were made into a customised LIMS and automated equipment for data management, reduction of manual transcription errors and streamlining of sample processing. Anglo Platinum is committed in rolling out the enhancements to all sites as priority dictates.

Jan 1, 2008

Traditionally, the term ætotal systemÆ design applied to comminution conjures images of a design that addresses the usual business and operational drivers, including health, safety and environment (HSE), capital cost, operating cost, throughput and product size. In terms of the physical process, the mine to customer type studies also exemplifies an approach that satisfies a normal ætotal systemsÆ approach. As an industry there are drivers that are forcing a re-consideration of what we regard as our total system. This modification of drivers will require changes in approach and implementation to provide the best solutions. Some of the major changes that impact the drivers are shortage of skilled personnel, changing social attitudes to remote mine site work, greenhouse gas emissions (GHGE), quality of available orebodies and geographical location of new mine sites. One approach to the challenges presented by the changing business environment is to expand the system envelope around comminution to ensure that comminution, in its widest sense, helps to meet the new realities. Background to the new drivers and constraints is provided and some of the appropriate responses are examined in relation to the impact on the total system.

Jan 1, 2007

By Y L. Ma, Y Yang, M Chen, W Bruckard

To improve the understanding of the reactions and mechanisms occurring during the leaching of sulfide ores at high temperatures a range of advanced characterisation and sensing tools have been combined to provide a sophisticated and powerful methodology to examine sulfide leaching systems. These include advanced electrochemical methods, surface chemistry and materials characterisation techniques such as synchrotron X-Ray Absorption Spectroscopy (XAS), X-Ray Photoelectron Spectroscopy (XPS), Scanning Electrochemical Microscopy (SECM), and in situ X-ray diffraction (XRD), together with new robust solid state chemical sensors for in situ real time monitoring of key aqueous chemical parameters. The methodology was employed to investigate various sulfide mineral leaching processes. For example, oxidation of arsenopyrite at elevated temperature involves complicated multiple reactions and the process is strongly influenced by the solution conditions, component speciation and mineralogy. The methodology was used to study this system both ex situ and in situ to gain a detailed understanding of the complex chemical reaction mechanisms operating. These mechanisms are discussed in terms of the observed leaching efficiency. The application of this methodology enables complex sulfide leaching systems to be understood more fully such that process efficiency can be improved.

Aug 24, 2022

Attention is given to three possible alternative structures namely corporate joint venture, partnership joint venture and unincorporated joint venture. A corporate joint venture involves the formation of a separate and distinct legal entity with limited liability. The shareholders of the Company will be the members of the consortium. A partnership joint venture involves the members of the consortium joining a formal partnership. The partners will conduct the business in common with each other and will share the profits and losses of the project activities. The partners will be jointly and severally liable. An unincorporated joint venture is distinct from a partnership. The members of the venture will not be jointly and severally liable. Taxation and accounting aspects are examined and an outline provided of a typical joint venture agreement. The two main advantages of an unincorporated joint venture are considered to be a favourable treatment for income tax purposes and a greater degree of flexibility when compared with the corporate joint venture and the partnership joint venture.

Jan 1, 1983

Having successfully applied computer techniques to open pit mining applications, many software developers are now using their skills to tackle the much harder areas of underground mine design, planning and production.Dramatic improvements in the performance to price ratio of hardware (including high resolution graphics screens), a better understanding of the techniques of surface and solids modelling (and their subsequent display), moves towards standard user interfaces and advanced concepts of representing grade distribution in the ore body have all contributed to the recent increase in underground mining software activity.This paper details the general requirements of a workable underground mining software system, providing a minimum checklist of desirable features and emphasises the importance of ease of use, flexibility and intuitive feel. Some relevant trends in hardware, software and application techniques are highlighted and comments made on areas which require further development or are only available in a small number of packages.Finally, a comment is made on the role of computer models to provide a unifying medium for tying together all aspects of underground design, planning and production.

Jan 1, 1992

By F A. Roddick, C Swaminathan

As remaining gold deposits tend to become more refractory, some form of oxidative pre-treatment involving hydro or pyrometallurgy is necessary to maintain high metal recoveries. These pre-treatments include pressure oxidation, bio-leaching or roasting. In the past, the primary criterion for selection of oxidative pre-treatment relied mainly on the extent of gold recovery and relative economics. In this study, a different approach has been adopted, ie the quantitative determination of environmental performance of the oxidative pre-treatment processes bio-leaching, roasting and pressure oxidation to assess which had the least impact on the environment. By establishing the environmental performance of processes, waste minimisation can be addressed early in process selection. Using mass balances, the environmental theme method was applied to determine the performance, on the basis of gold treated, of the oxidative pre-treatment processes of selected plants. No clear trend was observed in the overall impacts of each of seven plants, with all but one of the environmental evaluation indices being of the same order of magnitude; this was probably due to masking effects arising from the large variations in feed composition, tonnage, and gold levels. Within each type of pre-oxidation plant however, certain trends were detectable. For instance, irrespective of plant size, ore composition or mineralogy, for the bio-leaching and pressure oxidation units, the general order of environmental impact from greatest to least was sequentially toxicity, acidification potential, depletion of resources, solid waste generation and greenhouse enhancement. For the roasters the acidification potential was the most significant. Determination of the environmental performance of the oxidative pre-treatment of a hypothetical ore in a plant of fixed tonnage was undertaken to remove the possible masking effects of variables associated with feeds of different mineralogy, gold tenor and tonnage. The bio-leaching process gave a marginally better performance than pressure oxidation, the roasting process the worst, although there was not a great difference between them. The decreasing order of contribution to the environmental index was acidification potential, toxicity, resource depletion, solid waste generation and greenhouse enhancement for bio-leaching and pressure oxidation; whereas it was acidification potential, solid waste generation, toxicity, resource depletion and greenhouse enhancement for roasting. Since the major contributor to the environmental index was the acidification potential, the environmental performance of treatment processes for the acidic effluents was calculated. After neutralisation of the net acid resulting from bio-oxidation and pressure oxidation, and the application of various scrubbing and product formation processes for the sulphur dioxide from the roasting process, it was shown that pressure oxidation gave a marginally better performance than bio-leaching, ahead of roasting. This study demonstrated the potential for the development of a predictive tool which could be used in determining the environmental performance, and thus the selection, optimisation, and improvement of pre-oxidation processes for least impact on the environment. These would allow operation of these processes within defined environmental performance limits and decisions regarding the desirability of processing various parts of a heterogeneous orebody to be made on environmental grounds.

Jan 1, 2000

By N J. Beukes, J Gutzmer, C Reinke, M Bau

In this study the light sparse phase search (SPL_Lt) mode on the Mineral Liberation Analyser (MLA) was successfully used to identify and quantify the abundance of rare earth element (REE) phosphates in Precambrian iron formations. Monazite (light REE phosphate) and xenotime (Y and heavy REE phosphate) are identified and data from the MLA combined with the mineral chemistry of the two minerals are used to calculate and model the expected REE concentration and distribution in these two REE phosphates. The REE phosphates account for up to 31 per cent of the REEs in the banded iron formations (BIFs) and excellent correspondence is observed between the modelled REE patterns and the whole rock geochemical data available for the same samples. Except for quantifying the mineral weights, the sparse phase search also allows for the localisation of REE phosphate grains and the observation of their association with other minerals using backscatter electron (BSE) imaging. These observations are used to conclude that the REE phosphates were most likely of diagenetic origin, with REEs and phosphate remobilised from primary chemical precipitates. It is demonstrated that automated mineralogical techniques can be used to qualitatively and quantitatively describe the influence of a rockÆs trace mineralogy on its geochemistry.

Jan 1, 2008

By Campain RA, Horner NJ, Limerick JM

The review covers the different concepts of automation which are appropriate to non-ferrous smelting and the degree to which the smelter, and the furnace in particular, is amenable to total automation. Due to the problems peculiar to a smelter, it is unlikely that a fully closed loop system could ever be achieved and that the smelter will continue to depend upon extended manual control supported by computer based information sorting and optimisation.Generally, loop control is performed using Taylor's Mod III process control system. For distinct plant systems involving a combination of process loops, sequencing, and data acquisition, the company has developed its own microprocessor based systems. Process optimisation using computer based analysis of operating data is well established. Utilising this data, computer modelling provides manual set point supervision for the furnace process control system.The impact of automation on the workforce and on operating costs is also examined. Predictions on future developments in the field of automation, optimisation and sequencing are propounded and related to the non-ferrous industry at large.

Jan 1, 1985

An attempt has been made in tftis paper to review the general situation regarding the needs of the Mining and Minerals Industry for skilled and qualified personnel. Having defined the behavioural objectives of the courses of study, reference is thereafter made to the factors influencing the effective design of courses for apprentices, technicians and Technologists.

Jan 1, 1981

An algorithm is described which leads directly to a unique set of coal washing parameters which, in two or more parallel streams, will give maximum yield of product at a given ash. This occurs when all parallel streams are washed to the same incremental ash. This strategy is shown to offer a considerable increase in yield compared to the simpler strategy of washing each stream to the same sumulative ash.

Jan 1, 1987

Safety bulletins and stickers issued for the paste backfill plant at Cannington read as follows: æCannington Paste Fill Plant, First of ItÆs Kind in AustraliaÆ. We could even dare to state that the Cannington plant is different than any other paste backfill plant in the world because of the overall design, plant equipment and underground delivery. However, one thing to be certain of is, the paste backfill plant works as designed and a pump is not required to deliver paste underground given the general plant arrangement at Cannington. The past two years have been a process of evolution to design and construct the plant and make it work. This paper will describe the paste process using full mill tails along with placement of cemented paste underground. Discussions will include rationale of fixed plant selection along with various control requirements. BHP World Minerals recently commissioned its paste backfill plant in December 1997. Cannington is placing full mill tails underground via two surface boreholes that deliver either to primary or secondary stopes.

Jan 1, 1998

What is the best circuit to comminute primary crusher product to make beneficiation feed? Finding the best circuit to crush and grind minerals to beneficiation sizes is a complex problem that can lead to interminable discussion. Conclusions reached can be questioned. This will continue as long as the technology of comminution continues to expand, and is a mixture of many technical and economic factors in what is not a precise science. Laboratory and pilot plant procedures now exist that can help process engineers make sound decisions on which circuits are the best for crushing and grinding the specific ore being studied. It is the aim of this paper to discuss such procedures so a better under- standing of key decision parameters is avail- able, and to update comminution testing which has seen a. period of change in which new procedures have been introduced.

Jan 1, 1978

The Electricity Commission of New South Wales operates three power stations located on Lake Macquarie and Lake Munmorah. Coal for these power stations is supplied by three collieries operated by the Electricity Commission, three operated by the State Mines Control Authorityrand one privately owned. Most of the coal used in these power stations is won from the Great Northern seam which lies at depths of up to 220 ft at Awaba and at depths of the order of 600 ft at the remaining mines on the southern end of the field.

Jan 1, 1972

By Briggs D

Comparing the results of a plant trial by averaging performance measures collected during the trial with measures collected before and after the trial is often quite subjective because of the impact of natural variation on the process. This is

Jan 1, 1997

In recent times there has been a marked increase in public awareness of air pollution. Some of this has been induced by the Press but our own senses tell us that there is a visible haze over our cities on many mornings. The people are now demanding a clean environment and will no longer tolerate smoke and dust fall or gaseous and odorous emission which either soil building and furnishings or interfere with comfort and well being.

Jan 1, 1971

The paper presents an algorithm for calculating the natural air distribution in a ventilation network (sub-network) on the basis of following data: - for each network branch: labels of starting and ending nodes, label of the branch, resistance and natural depression; - for each fan: the characteristic in the form of a second order equation and initial flow.

Jan 1, 1977

Utah Development Company began prospecting for coking coal in 1961 and Blackwater Mine became a reality in June 1967. Exploratory and develop- ment drilling has been a continuing effort and reserves have been assessed at several stages. Some of the history of exploration and reserves assessment is given and practices in drilling, sampling and testing are described, particularly in regard to objectives of drilling and reserves estimation. The current methods for calculation of reserves are described and some comment is made regarding use of the data in mine blending control and plant operation including correla- tion of results.

Jan 1, 1979