Search Documents

This paper describes some of the challenges and opportunities of contract mining overseas, based on the experiences of Byrnecut Mining Pty Ltd over recent years. It seeks to highlight the advantages Australian miners have compared to competitors around the world, and the opportunities that arise from that. A number of pitfalls and how to avoid them are also discussed.

Jan 1, 2002

The purpose of this paper is to review recent approaches by regulators, employers and employees and their associations to the introduction of flexible employment practices and the management of fatigue related risk. More importantly, it will focus on developments in our law either through legislative change and cases which have dictated trends. The paper particularly considers the limitations imposed by occupational health and safety legislation to resist or limit the move to flexible workplace practices on the basis that such practices are unsafe.

Jan 1, 2003

By D A. Aitzhanova, E Zh Omirzakova

The Republic of Kazakhstan has well developed mining and metallurgical complex. In modern conditions, when deposits of useful minerals are running thin, it is very important to find additional sources for obtaining necessary products. As our investigations showed different kinds of waste may be used for producing of different kinds of products, which are successfully applied in different branches of KazakhstanÆs economy. Analysis of ways for increasing of complex use of mineral raw materials of different deposits, widening raw mineral materials base and decreasing negative effects on the environment, are presented in this paper.

Jan 1, 2003

Expert systems have been employed in a number of areas for a considerable number of years. However, the traditional long development times associated with these systems have restricted their application. With the advent of powerful Expert System Development Tools such as COMDALE/X and the use of efficient development techniques, the time required can be drastically reduced. This results in the availability and applicability of this technology to a wide range of applications. This paper discusses some of the 'rules' which indicate amenability (or otherwise) of a particular problem to an expert system solution. Various problem types are examined and these are illustrated with reference to examples of their use at various operating sites.

Jan 1, 1991

By Thatcher R

In areas where undeveloped land represents a scarce resource, an upgraded post mining land use can result in economic benefits to both the mining company and to the community. A study undertaken at Allied Queensland Coalfields Ltd's Aberdare Colliery located between Brisbane and Ipswich during 1986/1987, assessed the costs and benefits of developing the site following mining for grazing, forestry and residential uses. The proposed final land use plan comprised a combination of these uses which can be upgraded to higher valued uses once subsidence monitoring of backfilled opencut areas and dumps indicates that total settlement has reached acceptable levels. The study involved the documentation of existing site environmental parameters and the delineation of site opportunities and constraints. The unpredictable nature of settlement over backfilled opencuts and overburden dumps represents the major constraint to urban development on mined areas.

Jan 1, 1987

Metal smelting is seeing a continual increase in intensity and throughput in recent years. This is done with increasing demand for cost/capital efficiency, higher recovery, and managed environmental impact, among other things. With the development of more intense smelting processes, the issues of refractory wear, mixing and separation of reacting phases and the nature of the reactions between them become more prominent. Understanding of interfacial phenomena is in growing need, in addition to knowledge of the bulk properties of equilibrium and transportation. The GKW CRC has a suite of projects aimed at developing various techniques and expertise to provide information of interfaces in metallurgical systems. This article illustrates some recent development in this area, particularly in studies of melt/refractory contacts, the determination of surface and interfacial tension of metal/slag/matte melts, modelling slag-metal mixing and studies of kinetics of the smelting reactions.

Jan 1, 2000

By Cole RT

The cultural ages of man have been defined in terms of smelting and hence as a prerequisite, mining for example the iron age and the bronze age. There could be no separation of the man from his role as the technologist (miner/ smelter) for his early metal working efforts were to enhance survival. In the millenniums since, the artisan specialist developed and the technologist emerged. The process is a sort of technical natural selection. From the generalist hunter, gatherer, miner, metalworker we advanced over the centuries with great 'steps for mankind' to the series of specialists each largely intent on securing his/her technical functions from the curious assaults of other tribal members. The relevance of all this to the theme, 'Past, present and future of the Victorian mining and metallurgical industries', is simply that people have always, and will always, be the moving force in our industries. It is the effectiveness of people now and in the future that this paper addresses.

Jan 1, 1982

By Belcher C. B

A simple gravimetric procedure was developed for the rapid determination of carbon dioxide in coal mine roadway dust samples and the result is used for the subsequent calculation of incombustible matter contentaccording to the requirements of the Queensland Coal Mining Act. The carbon dioxide is determined through loss of mass by a semi-enclosed apparatus, following room-temper.ature hydrochloric acid attack on the sample.With a sample containing 36 per cent carbon dioxide, the achieved standard deviation (ls) of 0·3 per cent CO. is adequate for coal mine roadway dust analysis.This simple procedure enables relatively unskilled labour in mine laboratories, to analyze coal mine roadway dust samples in accordance with the Act. Some 50 analyses can be achieved per day compared with 8 by the Australian Standard Method for coal.

Jan 1, 1976

The report by Baker (1958, p. 27) of krennerite in contact with gold in a specimen from the 2500 ft level, Phantom South lode, Great Boulder mine, Kalgoorlie, led the writer to look into this further, since Cabri (1965) reported that the assemblage krennerite-gold was unstable between 238° and 356° C, and possibly down to room temperature.Dr. G. Baker very generously provided the writer with two chips from the same rock specimen (No. 14 as labelled from the mine) in which the krennerite gold assemblage was reported to occur. These were examined by polished section and x-ray diffraction techniques and returned to the classified collection of the Mineragraphic Investigations Section of CSIRO.One specimen, showing visible gold, was examined optically with a binocular microscope and telluride material was twice removed from contact with the gold for x-ray diffraction. This material proved to be petzite and so amends a statement by Baker (1958, p. 39) that no petzite was found in the Phantom lodes.The second chip was polished, and microscopic...

Jan 1, 1967

By J F. Penrose

To obtain cost-efficient financing by way of securing an optimal credit rating, the operating and market risks of a single-asset mining project should be accommodated in the financial structure. Weak financing structures can cause projects to fail, as evidenced by the Murrin Murrin and Bulong examples; these can be compared to the investment-grade structure of Straits (Nifty), which managed operational, market, and financing risks well. Most mining projects are capital-intensive, and have heavy dependency on debt financing. A weak financial structure may result in the early failure of an otherwise sound and economically viable project. Appropriate management of technology, construction, and management risks generally will get a project built; of the project failures that occur, most are caused by a liquidity crisis as the project goes through ramp-up (the transition period between completion of construction and full operation). A projectÆs viability can be enhanced through sound hedging practices, while poor hedging can increase the likelihood of financial default.

Jan 1, 2003

By P Alspach, R Buxton, C Morgan, C Ross

Mining companies worldwide have an increasing interest in restoring indigenous ecosystems following mining. Low levels of plant nutrients and organic matter, pH extremes, heavy metals, physically challenging media, and difficult climatic conditions all hinder revegetation of steep rockdump slopes. Our techniques use colonising pioneer plants to accelerate natural soil development and plant succession processes on minesites that are difficult to revegetate with locally sourced plants by traditional techniques. Suitable treatments and pioneer species must first be identified for each rocktype. Field trials at the Stockton Coal Mine in Buller have shown that successful acceleration of moss and pioneer plant establishment is possible. Best plots showed a mean of 15 per cent moss cover and 3.3 per cent vascular cover after 12 months compared with 0.1 per cent and nil respectively for controls. Techniques have been extended to field-scale trials, using hydroseeders and dryblowers. These techniques show potential for practical land rehabilitation, whilst conserving local biodiversity.

Jan 1, 2003

The Bowen Basin of Central Queensland covers a total area of 3 200 000 ha. The Basin has proven reserves of about 24 000 000 tonnes of coking coal and steaming coal which constitutes about 70 percent of the known coal reserves in Queensland. Large scale open cut coal mining in the Bowen Basin commenced at Moura in 1959. There are now 16 open cut mines operating in the Basin and they collectively mine through about 3000 ha of land each year. Most of the land which has been mined has previously been used for extensive grazing. No mining has yet taken place on cropping land although coal reserves underlie land which has been cropped or has potential for cropping. The primary objectives of almost all of the mining companies operating in the Bowen Basin are to rehabilitate mined land to a stable and productive form which is compatible with surrounding land use which is dominantly grazing. The acceptability of these objectives is considered against the prospect of mining of cropping land and the qualified success of the return of rehabilitated land to grazing uses.

Jan 1, 1987

By C M. Côte, P Bolz, L Pagliero, M Edraki, M Shaygan, P Erskine

Mines in Queensland must now prepare a Progressive Rehabilitation and Closure (PRC) plan, with the requirement to justify the selection of the post-mining land use (PMLU) for each rehabilitation domain. Given that there are nearly 200 mines who must undertake a comprehensive PMLU assessment, there is a need to develop methods that will minimise the duplication of effort. As part of a broader initiative on innovative post-mining land use planning, this project undertook a regional analysis of the technical suitability of several PMLUs.

Aug 2, 2023

A good blending system is one that ensures that a plant can cope with the amount of grade variation that it will encounter. Prediction of amounts of variation that will be encountered on time or tonnage scales that are important should be regarded as an essential part of the planning of mines and plants. In some cases, the natural amount of grade variation when ore is mined and handled in the cheapest way will be acceptable. In other cases, it is necessary to understand the effects that various ore-handling processes have on amounts of grade variation at various scales and to design a blending system with considerable care. Blending tends to matter more when plants are sensitive to many aspects of grade. It can be very difficult to find the best compromise between capital cost and the amount of grade variation. In these cases it is important that ore blending options be considered carefully as part of the planning of mines and plants. Failure to make plans that consider likely amounts of variation can be very expensive.

Mar 1, 2010

This paper provides an expanded definition of industrial minerals that challenges the way we look at exploration, development and the understanding of mineral industry structure and profitability. Included in industrial minerals are bulk commodities such as iron ore and coal alongside the more traditional industrial minerals such as salt, soda ash, silica sand and clay. The profitability of industrial minerals is reviewed from a producerÆs perspective and shown in many instances to be significantly higher than for precious and base metal industries. The key drivers of profitability are examined along with some highly profitable industrial mineral industries such as borate, potash, chromite and natural soda ash. Demand for industrial minerals in Australia and Asia is reviewed, with a focus on supply bottlenecks and the opportunity this represents for investment by Australian companies. The establishment of new price benchmarks is considered and the possibility of new export grades for industrial mineral products. Investment opportunities in industrial mineral projects are outlined, including some exploration concepts in Australia and Asia. Industrial mineral project evaluation methods are discussed and the challenge issued to companies (exploration, production and finance) to become a part of the profitable action in the world of industrial minerals.

Jan 1, 2004

Those involved in managing risk today are asking various questions: why is it so frustrating to discuss æriskÆ with communities? why do consultative processes around æriskÆ get more and more complex? where is all this going to end? These questions will be addressed by examining how our understanding of risk has changed from one based on biophysical hazard to a broader view that includes social and cultural factors. There is evidence to suggest that we are living in a ærisk societyÆ, where the goal of æsafetyÆ has replaced that of equality in a class based society. The global mining industry operates within this complex and politicised environment. The very meaning of ædevelopmentÆ has broadened from the narrow economic vision to include the social and environmental factors which make up æSustainable DevelopmentÆ. Corporate accountability now extends beyond traditional shareholders to wide groups of stakeholders. The mining industry is developing responses which look beyond traditional technocratic methods. At the industry level these responses have included the recent Mining Minerals and Sustainable Development global and regional reports It has proven challenging and difficult to operationalise these new understandings at the company level and it is time to look at the bigger picture.

Jan 1, 2003

By E J. Gardiner, C M. Hogan

Acidic drainage has long been recognised as the largest environmental liability facing the mining industry, and to a lesser extent, the public, through abandoned mines. The Canadian Mine Environment Neutral Drainage (MEND) initiative was the first international multi-stakeholder program to develop scientifically based technologies to reduce the effect of acidic drainage. The original MEND Program extended over a nine-year time frame ending in 1997, with technology transfer activities continuing to the end of year 2000 under the MEND 2000 program. Both programs have contributed enormously to the understanding of acidic drainage and how to prevent it. MEND3, launched in 2001, intends to further this effort with a strong, research-driven program. The successes of the MEND initiative have come through the collaborative efforts of the partners, the sharing of experiences, the thorough evaluation of technologies and their incremental improvements. As a result, the knowledge base on acidic drainage has grown considerably. An international model of alliance between the various worldwide initiative involved in acidic drainage is being formalised at this conference. This global alliance will enhance technology transfer capabilities and will lead to improved environmental performance for the industry. It is through collaboration that we have achieved the most progress in environmental performance, and this formal relationship will further expand these benefits.

Jan 1, 2003

Project evaluation is completed through individual studies covering technical and financial aspects of the mine to market. These studies are completed at various levels of detail depending on where the project evaluation is in the projectÆs life cycle. The competency of the studies varies in relation to the quality of data, level of the skills employed, control, management and reporting structure. The focus of this paper is managing elements of the study, looking at the cost of opportunity to influence the project, against the value added. Selection of the study manager and study teams is central to getting an integrated project evaluation addressing the correct issues completed on time. Retention of key personnel can reduce rework which, in turn, can reduce time and cost impacts. It is important to have a work breakdown structure at the outset so that the study teams have a common numbering and naming system that will integrate areas, equipment, budgets estimates and accounts. Having set up the evaluation groups and provided training in the study procedures, understanding the scope and schedule are vital elements in producing a project evaluation that addresses the opportunities and the risks of the final project. Arriving at an accurate capital budget requires integration of the research controlled through common systems. Project evaluation process must also address how the project is to be delivered.

Jan 1, 2007

By Allen RL, Clifford BA, Wright JV, Bull S

The Bunga Beds of the Late Devonian - Boyd Volcanic' Complex is a well exposed succession of rhyolite, sedimentary rocks and minor basalt outcropping along the south coast of New South Wales. The sedimentary rocks vary from shallow water basin margin facies, to deep-water basin centre facies, and the majority of .the volcanics are associated with the deep water facies association. The volcanics are dominated by rhyolite domes, lavas and cryptodomes, whose margins are extensively autobrecciated and quench fragmented. In situ pyroclastics represent a very minor volcanic component and are restricted to the remnants of two small doors- top tuff cone successions. Pyroclastic debris is common in the sedimentary succession enclosing the volcanics and was clearly derived from shallow to emergent basin margin areas through mass-flow redeposition. The succession has bearing on the origin of the fragmental component of, the volcanics that host Kuroko- type massive sulphide deposits. The characteristics of these fragmental volcanics are not well documented. We suggest that based on the Bunga Beds,'Kuroko-type volcanic successions are dominated by coherent rhyolite/ felsic lavas and intrusive domes, autobreccias and hyaloclastites, that in situ pyroclastics are rare or lacking, and that redeposited volcanic debris is abundant. Pyroclastic debris is most likely to have been derived from shallow areas marginal to the deep-water volcanic centre that produce the Kuroko-type volcanics and sulphides.

Jan 1, 1987

The efficient development and exploitation of an orebody relies on an understanding of the mineral characteristics of the deposit. This information is valuable throughout the mining cycle - during exploration, assessment, testing, design, operation and rehabilitation. Problems can arise at each stage if there is an inadequate appreciation of the mineralogy involved and its effects on the treatment process. Modern image analysis systems now permit a more quantitative understanding of the mineralogy of an ore to be gathered. Where previously the metallurgist had to rely on qualitative information to guide technical decisions, it is now possible to give numerical estimates to the compositional and textural properties which govern the mineral concentration processes. Ore samples can be characterised according to modal abundances, mineral grain size parameters and mineral associations, all of which affect the liberation and concentration of the values. The paper will discuss the application of quantitative process mineralogy by considering a number of case studies. These include: ore characterisation to assist in exploration, assessment and mine planning; modal analysis of complex mineral suites to assist in the evaluation of ores, the deportment of values between products and the recovery or loss of these values; liberation analysis for ore testing, plant optimisation and performance monitoring; and characterisation of tailing to guide estimates of leachability, stability and rehabilitation options.

Jan 1, 1998