Search Documents

By Robert G. Ditchburn

Msjflkcisokng During the past sixteen years, GNS Science has developed a number of radiometric methods for dating massive sulfide samples from submarine arc and back-arc volcanoes. This has improved our understanding of the formation of these hydrothermal systems, the frequency and duration of their activity, and assisted marine mineral exploration companies in assessing the economic potential of these deposits that can be rich in copper, zinc and gold (up to 90 ppm Au in some chimneys). The radiometric dating methods that we employ utilize radium isotopes that are extracted from the host rocks without their parent thorium isotopes, by ascending, hot, acidic hydrothermal fluids. When the hydrothermal fluid discharges into cold seawater, chemically similar barium and radium co-precipitate as barite, a common mineral contained within the black smoker chimneys that grow upwards from the seafloor. From the onset of mineralization, the isotopes 228Ra and 226Ra (with half-lives of 5.75 yrs and 1600 yrs, respectively) begin to decay, so that the 228Ra/226Ra and 226Ra/Ba values decrease with time. Thus, samples can be dated using these ratios once the initial values, i.e., the values at the onset of mineralization, have been established, ideally from active chimneys. 228Ra decays to 228Th (half-life 1.91 yrs) and from the 228Th/228Ra values, the growth-rate of individual chimneys can be estimated. The isotope 210Pb (half-life 22.3 yrs) is occasionally used for dating the mineralization, although several samples from a chimney are needed to determine an age from the 210Pb grown from 226Ra, using the isochron technique.

Sep 14, 2011

By J. C. Wiltshire

Both ferromanganese crusts and nodules present potential processors with enormous volumes of tailings of dubious environmental character: most processing scenarios fail to utilize the uneconomic manganese itself, leaving a total waste volume on the order of 96% of the incoming ore. Each current disposal proposal seems flawed: (1) backhauling to the initial mine site is costly and might run afoul of EPA or UN marine dumping*regulations, (2) subsea disposal near a coastal processing site means almost inevitable community opposition, (3) agricultural soil amendment for improving barren lava or coral rubble appears to require prohibitive amounts of supplementary phosphate, and (4) the slag resulting from an energy intensive pyrometallurgical processing may have potential as road ballast, but few processors will opt for smelting in all but those locales where energy is very cheap. This unfortunately rules out a smelting operation in almost any Pacific Island environment. We envision at least one other scenario which could result in both the removal of tailings from a processing plant and an increase in the supply of useful building materials at little or no cost to either the processing or construction industries--transforming a tenacious waste into a novel resource. Ongoing experiments have demonstrated considerable potential for turning acid leach tailings into dark composite facing stone, fancy black tile, novelty ceramics or concrete aggregate. The tailings are commonly very fine grained and may also serve as an additive in drilling mud. Applications as an additive to asphalt also need to be explored. The metal scavenging nature of ferromanganese minerals should be considered as a radioactive waste disposal matrix. There is no doubt that the greatest challenge will be

Jan 1, 1991

By Brian D. Bornhold

A comprehensive multi-disciplinary marine geological survey of northwestern Graham Island, Queen Charlotte Islands, British Columbia, Canada was conducted by Offshore Survey and Positioning Services Ltd. of Vancouver, B.C. on behalf of the Geological Survey of Canada; Energy, Mines & Resources Canada, Pacific Geoscience Centre, Sidney, B.C. Canada during October 1984 and July 1985. The aim of the survey was to map both the surficial geology and geomorphology in order to identify and evaluate the nature of the nearshore sedimentation and recent tectonics including stability (slumps and scarps) seafloor faults (frequency and displacements) and both the classification and consistency of soil type boundaries and properties. Data was acquired by utilizing conventional indirect applied marine geophysical techniques including side scan sonar, precision echo sounding and complimentary soil sampling. During October 1984 a total of 320 line kilometres of data including 180 soil samples were acquired. During July 1985 a total of 300 line kilometres of data were acquired including 150 soil samples.

Jan 1, 1985

By Chan Min Yoo, Kiseong Hyeong, Inah Seo

INTRODUCTION One of the major concerns for deep seabed mining is its environmental impact, from the disturbance of benthic communities due to the mining activity to the disposal of mine tailings back to the ocean. Yet a significant amount of waste materials would be produced from the on-deck processing on the mining platform, all the materials that produced on the mining platform are to be shipped to the land unless the related regulation and guidelines are developed by IMO and ISA (ISA, 2018). Still, ecotoxicology data for the deep seabed minerals from case studies in deep-sea tailings disposal (DSTD) and submarine tailings disposal (STD) sites are lacking and all other related aspects are also largely unknown. This year, the Republic of Korea has started a research project for the more comprehensive understanding of chemical and physical properties of mine tailings from the on-deck processing and the possible environmental impacts on the marine organisms after its disposal. Based on the scientific data collected from this project, Korea would be able to make recommendations for the methods and technical standards for the deep seabed mining discharges. The subjects of this project are threefold: to understand the physical/chemical properties of the tailings, to model the dispersion of particulates after the disposal, and to assess its impact on the marine ecology. Laboratory Experiments Producing Mine Tailings First, the possible waste materials are produced by mimicking the collecting and dressing processes at sea. The polymetallic nodules (PN) would be mined by using a collector lifting the crushed nodules out of the bottom sediment, and the bottom water, accompanying sediment, and the fine nodule particles which are too small to be recovered would be discharged to the ocean and thus are considered as tailings (Schriever and Thiel, 2013). In the laboratory, PN is crushed into the fragments smaller than 2 cm, abraded in the water using the rock mill, and then sieved to obtain the fine particles to be disposed.

Jan 1, 2018

By Georgy Cherkashov

Shallow-water formation of marine ferromanganese nodules as well as their deep-water analogues is found throughout the global ocean. The Baltic Sea is a key province for the shallow-water type of marine minerals. The following main distribution areas of Fe-Mn nodules have so far been discovered in the Baltic Sea: the Gulf of Bothnia, the Gulf of Riga, Central Baltic area (Gdansk- Klaipeda) and the Gulf of Finland. The last area (Gulf of Finland/Finnish Bay) is the best studied from all aspects including geological prospecting and environmental assessment.

Sep 14, 2011

By Gary J. Massoth

Wherever hydrothermal fluids vent from the seafloor they will buoyantly rise (up to 100?s of meters) while mixing with seawater before attaining density equilibrium and dispersing laterally as neutrally buoyant plumes commonly 50 to several 100?s of meters in thickness and with order-of-magnitude or greater breadth. Although these plumes are typically >10,000-fold dilutions of vent fluids they can be reliably detected using sophisticated physical sensing and chemical techniques. Hence, hydrothermal plumes are spatially large targets compared to the actual sites of seafloor fluid discharge and resulting mineralization. For this reason plume prospecting techniques evolved over the past 20+ years have been widely used to systematically explore over 10% of the 60,000-km-long system of mid-ocean ridge (MOR) spreading centers for hydrothermal activity. While plume detection and gradient mapping can be used to home in on venting sites, plume chemical signatures provide additional insight regarding the nature of the fluids being discharged on the seafloor. We have applied the systematic plume prospecting techniques developed on MORs to the volcanic frontal arc setting as part of the NZAPLUME (New Zealand American PLUme Mapping Expedition) surveys. NZAPLUME I in March 1999 marked the first systematic reconnaissance of any intra-oceanic arc for submarine hydrothermal activity. Seven of thirteen previously mapped volcanoes that comprise a 260-km-long section of the southern Kermadec arc northeast of New Zealand were confirmed to be hydrothermally active. On average, one hydrothermally active volcano was found along each 35 km of arc front, a rate comparable to slow- and intermediate-rate spreading MORs. During NZAPLUME II in May 2002, thirteen previously unknown volcanoes and 8 satellite cones were first swath mapped for bathymetric detail and then surveyed using plume prospecting techniques. Three active venting sites were discovered along this 580 km-long arc section, bringing the total to 10, or 39% of 26 volcanoes surveyed overall, still an appreciable frequency rate for venting sites compared to MORs. While only chemical results for NZAPLUME I are available, the arc plumes characterized so far are chemically diverse and rich compared to MOR plumes. This diversity and enrichment was most evident as ultra-high concentrations of CO2, sulfur gases (St = SO2 + H2S), and Fe within plumes over several volcanoes. We suggest the fluids discharging from the seafloor at these sites are volcanic fluids, i.e., hybrid fluids comprised of MOR-like hydrothermal fluids evolved from seawater-rock reaction and fluids exsolved from magma as acid volatiles and liquid brines.

Jan 1, 2002

By Raymond A. Binns

Drilling into an active hydrothermal system linked to convergent-margin felsic magmatism is a listed priority of the Ocean Drilling Program that addresses several fundamental geoscience issues. Solid and fluid products of felsic rock-water interaction, and the consequences for global chemical fluxes and for ore deposition, should differ from those in basaltic mid-ocean ridge environments already successfully tested by Legs 106, 139, 158 and 169. So, too, will fracturing controls on fluid pathways, and sources for metals and ligands. Researching the subsurface volcanic, structural/hydrologic, and mineralisation/alteration architecture of a drilled felsic-hosted system also has economic implications, especially for land¬based mineral exploration. A first-order hypothesis to be tested states that fluids derived from volatile-rich magmas are more important than recirculated seawater in convergent-margin hydrothermal systems - economic geologists increasingly appeal to this for creating "world-class" massive sulfide orebodies. Another hypothesis proposes "subhalative" massive sulfide deposition within hydraulically expanded volcanic products as a factor in generating large orebodies. Many second-order hypotheses such as leaching fractionated volcanics to cause gold enrichment in back¬arc systems also need testing. The thoroughly surveyed, active, PACMANUS hydrothermal field in the Eastern Manus back-arc basin of Papua New Guinea will be the site for ODP Leg 193 commencing in November 2000. It lies near the crest (1655-1750 m) of high-standing Pual Ridge, a 40 km-long edifice of dacite/rhyodacite with basal andesite all having geochemical and isotopic affinities with modern arc volcanoes of nearby New Britain. PACMANUS includes at least three focussed, high-temperature "smoker" sites with Cu+Au-rich massive sulfide deposits, and a field of diffuse, lower temperature venting through intensely altered dacite where modelling indicates significant subsurface mineralisation. Isotopic characteristics of deposits and vent fluids suggest magmatic contributions to the mineralising fluids.

Jan 1, 2000

By Georgy Cherkashov, Livia Ermakova

Active development of the exploration and further exploitation of deep-sea minerals requires special emphasis on the protection of the marine environment. The complexity of this subject lies in the fact that potential impact and effects of future mining activity are not completely known. One of the main sources of potential impact near the seafloor, as it expected, would be a generation of sediment plumes, their dispersion and redeposition of sediment. Meanwhile, their dimensions, rates of dispersion and redeposition are a big issue. Other plumes are expected in the surface layer as a result of discharges of processing waters and particles after sorting on board of mining vessel, and their features are also not clear. At the same time, understanding of these aspects would be crucial for definition of environment impact area, delineation and designation of different types of protected areas (Areas of Particular Environmental Interest, Impact and Preservation Reference Zones) and future assessment of environmental impacts. Attempts to address these issues demonstrated wide variations between the data of field experiments on the one hand and the results of analytical and numerical models on the other. According to in situ measurements, plumes were detected at a distance vary from one to less than 20 km [e.g., Burns et al., 1980; Sharma et al., 2001; Nautilus Minerals, 2008 etc.], whilst some models show results up to 100 km [Rolinski S. et al., 2001] and more. It seemed that results of in-situ experiments are preferable, but they were not many indeed. However, these data were used in different investigations rather widely, but their focus, as far as we know, was not on the matters related directly with plumes.

Jan 1, 2018

By P. C. Hollick

Two marine diamond deposits on concession 2b off Namaqualand along the South African Coast, have been systematically mined over the past year by the mv Moonstar. The two deposits, Smith?s Ulcer and Wedge Point Basin, are comparable in morphology, straddled the same water depths and have similar geology yet have given very different recoveries when compared to their respective grade models. These differences are best ascribed to the different style of mineralisation observed within the two deposits which has been directly controlled by the bedrock morphology. The smith?s Ulcer deposit has been formed in a metagreywacke bedrock displaying a strong north-south trending foliation which dips steeply to the west. Consequently the mineralisation is confined to narrow north-south linear trends with limited lateral extent (less than 5m) making extraction extremely difficult and somewhat variable. RE factors (recovered grade versus estimated grade) for this deposit range from 0.5 to 1.1. The Wedge Point Basin deposit is formed in a micaceous metaquartzite with a conjugate southwest northwest joint set, the southwest lineation being the more prominent, and structural foliation dipping gently to the west. The resultant style of mineralisation is confined to basinal features defined by topographical lows and is fairly lateral in extent (in order of 50m). Extraction of the mineralisation from this deposit is less arduous with recoveries more uniform, RE factors are frequently in the range 2 - 3. This style of mineralisation is more in line with what is to be expected from marine alluvial deposits, the nugget effect of diamond concentration being responsible for the high RE factor. The long narrow linear trends observed in Smith?s Ulcer demonstrably require a specialised approach in successfully sampling, modeling and ultimately mining.

Jan 1, 1998

By Michael R. Gipp

Marine Mining Inc. is currently exploring for marine alluvial gold and diamonds on a prospecting licence over a concession that covers 10,000 km2 of the continental shelf of Ghana. The boundaries of the concession extend from 0 30'W to 2 40'W, and between the shoreline and approximately the continental shelf edge north of 4 30'N. This concession extends from Kikam Beach in the west, to Senya Beraku in the east, a distance of approximately 240 km, and seaward an average of about 40 km. The concession is entirely underwater, with the exception of the estuaries of the Ankobra and Pra Rivers. Ghana has been a large source of alluvial gold, with historical production exceeding 25 million ounces. Southwestern Ghana is characterized by Precambrian rocks, which have been folded into a number of NE-SW trending synclines and anticlines. The most significant feature of the Birimian rocks is the presence of evenly spaced gold-bearing greenstone belts. They are 10-15 km wide, separated by about 90 km, separate basins filled by folded metasediments and granitoids. The rivers that enter the concession drain most of the exposed gold-bearing belts of Ghana. Given that approximately 2 km of erosion has taken place since the Mesozoic, and that gold mines on these belts boast proven reserves of over 55 million ounces, it is likely that large amounts of gold have been eroded out and carried to the sea. Coastal fractures, related to Precambrian structures reactivated during Mesozoic rifting, are responsible for the physiography of the coastal area, which consists of high-relief horsts separated by grabens that have been occupied and infilled by rivers or by finer sediments during times of elevated sea level. These fractures were loci of gold mineralization during the Precambrian, and are the source of alluvial gold in rivers confined by them.

Jan 1, 1998

By Luana Karvel, Lars Kullerud, Morten Sørensen, Øystein Halvorsen, Øivind Lønne, Elaine Baker, Tina Schoolmeester, Joan Fabres, Yannick Beaudoin

The UNEP Shelf Programme (USP) is the access point for a collaboration of international organizations with expertise in marine geoscience and maritime law. It was established in response to a United Nations resolution, stating that the United Nations Environment Programme (UNEP), working through the Global Resource Information Database (GRID) system, should work in conjunction with Intergovernmental Oceanographic Commission of UNESCO (IOC) and the International Hydrographic Organization, to assist coastal States, and in particular developing States and small island developing States (SIDS) with submissions to establish the outer limits of their continental shelf under Article 76 of the United Nations Convention on the Law of the Sea (UNCLOS).

By Tony van der Steen

Subsea mining system are designed for the following, principally different, tasks: Dreding - The destruction and removal of seabed sediments overlaying the bedrock. Cleaning - The competence of the system to systematically remove the deposits from an undulating hard bedrock with irregular pulleys, channels and fissures. Factors that influence the choice of dredging equipment for a specific project are project requirements such as environmental conditions, location and water depth. However, the most important selection criteria are soil conditions. As a consequence, possible dredging systems, must be evaluated for the following, principally different, characteristics: Dredging proficiency - The destruction of the strata by the equipment. System stability - The capability of the soil to support the subsea equipment The above parameters are determined by the strength characteristics and the bearing capacitv_ of the soil. The author describes the processes involved in excavating the subsea deposits and (transporting the gathered soil as a water-soil mixture to the surface using different excavation and transport methods.

Jan 1, 1998

By Chuanshun Li, Haitao Zhang, Xuefa Shi, Quanshu Yan, Zhiwei Zhu

In Expeditions 22 and 26 of China Ocean Survey (COS), Chinese and Russian scientists have Carried out a lot of work to search for hydrothermal sulfide in Southern Mid-Atlantic ridge (SMAR) 19°S, but come back empty-handed at last. The sulfide formation is closely related with the water-rock reactions which are controlled by the heat source. Melt inclusions are considered to have a unique compositions in melt to reflect the deep magma processes. Fortunately, we have found a large number of plagioclase hosted melt inclusions in SMAR19°S MORB. We have done experiments by re-homogenization and re-crystallization of these melt inclusions. During the re-homogenization experiments, the forming and melting processes of the olivine crystal inside the melt inclusions indicate that the homogeneous temperature of melt inclusions is 1190-1200??. During the recrystallization experiments, the different mineral phase assemblages show H2O inside the melt inclusions has hardly ever been loss, in addition Cr element and H2O molecule in SMAR19°S magma are heterogeneity at the time of melt inclusions trapping, and then the re-crystallization experiments provide a method to prove the microheterogeneity of basaltic magma system. Combining with the bulk rock data, this study shows that the melt inclusions are formed at a low-temperature and high-pressure condition. Eventually, this paper speculates that a low temperature heat source generated by a lower mantle potential temperature or/and a thick lithosphere indicated by the melt inclusions that not experienced the H2O loss process are beneath the SMAR19°S. The low temperature heat source transmits its heat to lithosphere through the cooling thermal boundary layer (CTBL), and the thick lithosphere can sufficiently absorb and consume the heat. Under the interaction between the heat source and lithosphere, the residue heat at the infiltration depth of sea water might have been no ability to satisfy the water-rock reactions temperature, therefore, the water-rock reaction should hardly ever appear, so the theoretical reaction zone would not exist beneath the SMAR19°S. Eventually, the interaction between thick lithosphere and the low-temperature heat source should be the dominant factor that makes SMAR19°S area have no condition to form the seafloor sulfide. However, this paper is based on melt inclusions only, in fact, melt inclusions are potential to have melt compositions produced by mineral dissolution, reaction and assimilation, and the volumes of melt inclusions are exceedingly small compared to the overall size of the magmatic systems, therefore, the extrapolation across many orders of magnitude is implicit when applying petrologic information obtained from inclusions to entire magmatic systems. Therefore, there should have other more research to verify the reliability of this conclusion.

Jan 1, 2017

By T. Kuhn

The Logatchev hydrothermal field is situated on the east inner flank of the rift valley of the MAR at 14°45?N and is hosted by serpentinized peridotites and minor gabbronorites while basalts are subordinate. Hydrothermal precipitates recovered from the Logatchev field during a recent R/V Meteor cruise include massive chalcopyrite chimneys, massive pyrite crusts, silicified breccias, abundant secondary Cu-sulfides, red jaspers, abundant Fe-Mn-oxyhydroxides as well as atacamite and Mn-oxides (Kuhn et al., 2004). Previous results of hydrothermal fluid studies in the Logatchev field are somewhat at odds with theoretical models of ultramafic-seawater reaction. Butterfield et al. (2003) suggested that the Fe component of orthopyroxene plays the more important role compared to olivine in ultramafic-hosted hydrothermal systems. This consideration is supported by the recovery of large amounts of Opx-rich gabbronorites and orthopyroxenites in the Logatchev field (Kuhn et al., 2004). A possible tool to constrain the contribution of the different rock types (ultramafics, mafics, MORB) to a seafloor hydrothermal system is the systematic analysis of 187/188Os ratios of the host rocks as educts and the sulfides as products. For instance, abyssal peridotites mainly display low 187/188Os ratios (<0.127); in contrast MORB and gabbronorites have radiogenic ratios of >0.13 (Snow and Reisberg, 1995), orthopyroxenite has ratios of about 0.174 (Büchl et al., 2002) and seawater has an ever higher 187/188Os of about 1 (Sharma et al., 1997). Therefore, massive sulfides predominantly leached from ultramafic rocks should have Os isotopic ratios plotting on a mixing line between the ultramafic rocks and seawater (in a 187/188Os vs. 1/Os diagram), whereas those derived from MORB, gabbronorites and/or orthopyroxenites will be plotting on different mixing lines.

Jan 1, 2004

By Peter A. Rona

Hydrothermal mineralization along slow-spreading oceanic ridges and rift -zones that comprise more than half the global length of the seafloor spreading center system is related to anomalous physical and chemical conditions acting within the geologic settings that characterize early and advanced stages of opening of an ocean basin. Mineralization in the early stage of opening is represented by the Atlantis II Deep of the Red Sea. There, hypersaline hydrothermal solutions discharging as density stratified brines into an axial basin, have formed the largest massive sulfide deposit (70 x 106 metric tons) known at a spreading center. Mineralization at the advanced stage of opening is represented by two types of sites: (1) oceanic crust on the wall of a rift valley; and (2) oceanic crust exposed on the wall of a transform fault zone. The first type of site is the TAG Hydrothermal Field, located on a wall of the rift valley of the Mid-Atlantic Ridge at the top of the basaltic layer of oceanic crust. Evidence is presented for multi-stage, high- and low-temperature hydrothermal activity that produces Cu, Fe, and Zn enrichments within the thin sediment column and stratiform interlayered deposits of manganese oxides, iron oxides, hydroxides and silicates, on the seafloor. The second type of site occurs along walls of transform fault zones of the equatorial Mid-Atlantic Ridge and Carlsberg Ridge, which exhibit stockwork-type Cu-Fe sulfide mineralization

Jan 1, 1985

By D. S. Cronan

Mineral exploration problems in the S.W. Pacific are not unique to that region, but a combination of favourable circumstances render it an ideal area to attempt to solve such problems. The land area of the S.W. Pacific island nations is only a fraction of the total sea area they can claim under current International Law. Hence, they have a great need to explore and evaluate their offshore areas. For the past ten years the focus of this work has been CCOP/SOPAC which has individually and jointly with other groups initiated and maintained far reaching marine mineral exploration programmes. In association with CCOP/SOPAC the writer has obtained and analysed approximately 650 sediment samples from the S.W. Pacific region for seventeen elements. Multivariate statistical techniques have been applied to the data set. The aim has been to identify chemically anomalous sediments reflecting either sea floor mineralisation and/or mineralisation on adjacent land areas.

Jan 1, 1985

By John Halkyard

Deep ocean mining is experiencing a rebirth following many years of low levels of activity. Large scale mining is being projected as just over the horizon. A lot has been made of the advances in deep water oil and gas developments over the last thirty years, and how this technology is directly applicable to ocean mining. The authors present their views on this from a perspective of a legacy of participating in the development of manganese nodule mining systems in the 1970s, followed by thirty years in the deepwater oil & gas arena. While it is true that great advances have been made in subsea technology, the differences between mining and oil and gas recovery should not be diminished. Fundamentally, oil and gas are stored in compact reservoirs under pressure. Any intervention leads to flow of the material up a pipe to the surface. The seabed hard minerals are stuck in place, either adhering to sticky pelagic sediment (nodules) or bonded together as hard rock (massive sulfides). The minerals require complex machinery in order to be extracted, sized, concentrated and lifted to the surface. Once at the surface the ore must be dewatered, de-fined and transferred to shore for processing. The overflow from this dewatered product must return to the sea in an environmentally satisfactory manner. These steps involve technology unique to mining that has to be addressed in a methodical fashion before commercial mining systems can be designed. The presentation will discuss the critical technical challenges of deepsea mining and thoughts on different routes to commercialization. The program will address the critical technical challenges, as perceived by the authors, and steps required to address them. Alternate development programs will be discussed focusing on nodules and sulfide. Keywords: manganese nodules, polymetallic sulfides, ocean mining

Jan 1, 2011

By D. S. Limpenny

Marine benthic habitats are vulnerable to the influence of a wide range of anthropogenic activities (e.g. sand and gravel extraction, dredged material disposal and trawling). Traditionally, benthic ecologists have relied on point sampling techniques such as grabs, corers and dredges to provide information on the physical nature of the substrates and their associated benthic fauna. However, information of this nature only relates to the specific point on the seabed from which the sample was collected and the interpolation of such data to predict the wider distribution of substrata and associated fauna may be unreliable. Our approach uses a range of acoustic, photographic and physical sampling methodologies to produce continuous acoustic coverage maps which can be used to assist with the interpretation of faunal distributions. This approach has been used to assess the impacts of marine sand and gravel extraction at the seabed at two sites off the east coast of England in the southern North Sea. The first study site (designated ?Area 222?) is located 20km off the southeast coast of England and was surveyed in 2001 using sidescan sonar, single beam bathymetry, seabed photography and also a 0.1m2 Hamon grab for the collection of benthos and sediment samples. The main objectives of this investigation were to provide an indication of the spatial distribution of the sediments and macrofauna in the wider area encompassing the dredged site, to evaluate the scope for the effects of marine sand and gravel extraction to extend beyond the boundaries of the site and to provide a wider geographical context for time series investigations. At this site, an acoustic basemap was utilised in conjunction with faunal sampling and photographic groundtruthing, to determine the nature and distribution of the seabed sediments and their associated features. Disturbances at the seabed arising from historic sand and gravel extraction activities were mapped, and this information was helpful in establishing biological cause and effect relationships. The acoustic basemap was also used to target biological reference sites against which the effects of adjacent man-made disturbances could be evaluated.

Jan 1, 2004

By Fredrik Søreide

The Norwegian EEZ contains large areas of interest for SMS exploration along the Mid- Atlantic Ridge, from Jan Mayen to Svalbard. At the same time Norwegian companies engaged in oil and gas activities are in the forefront of subsea development. This makes Norway ideally positioned to take a leading role within marine minerals research and commercialization. In the recent minerals strategy from the Norwegian Government marine minerals was pointed out as one of the strategic areas for the future. The Norwegian University of Science and Technology has established a research program in cooperation with Norwegian industry partners to determine the commercial potential of marine minerals in Norwegian EEZ. This presentation will give an overview of the status of marine minerals research and potential in Norway.

Sep 14, 2011

By Alexander Malahoff

Six active Kermadec Arc submarine volcanoes located between 34°S and 36°30?S were mapped and sampled by an interdisciplinary inter-institutional research team between April and July 2005 using submersibles Pisces V and Pisces IV aboard the mother ship the RV Kai?mikai-O-Kanaloa. The purpose of the expedition was to study the relationship between hydrothermal activity, formation of hydrothermal mineral deposits and the biodiversity of life associated with the hydrothermal vents. Of the volcanoes examined, all showed evidence of hydrothermal activity, plume production and helium anomalies. Only two of the volcanoes, namely Brothers and Clark, showed chimneys and surficial poly-metallic sulphide deposition. Hydrothermal venting at a water depth of 1700 meters within the base of the northern wall of the summit caldera of Brothers Volcano has produced a field of chimneys, some of them 5 metres high with black smokers venting. Temperatures of 300°C were measured within the active vents. Clark Volcano has a double cone summit at a water depth of 875 metres. The shallowest cone has a near-summit hydrothermal vent field with 5-meter high venting chimneys and smaller structures around the periphery. Water temperatures of 200°C. Geochemical and petrological analysis of the massive poly-metallic sulphide samples taken from Brothers and Clark show a diversity of mineralogy. This diversity is clearly a function of hydrothermal water temperature. Chimneys sampled from Brothers are pyrite and sphalerite dominant with lesser chalcopyrite. Sulphides from Clark Volcano tend to be barite rich with lesser sphalerite and pyrite. Sulphides from Brothers Volcano have a range in gold composition of 4 to 58 ppb with silver composition of up to 38 ppb. A mineral formation model for the volcanoes suggests hydrothermal fluid boiling within the volcanic edifice for those volcanoes with shallow summits and massive sulphide deposition with the edifice as well. Surficial deposits include native sulphur and lower temperature oxides. Only the deeper water Brothers Volcano shows massive sulphide deposition along the marginal faults of the caldera floor.

Jan 1, 2005