Search Documents

By Greg Joachims

Composition of salt in the Permian Flowerpot Shale in northwest Oklahoma suggests that the salt in this formation was deposited in the early phase of solar evaporation. Brine produced through natural dissolution of the subsurface salt has netted very pure brines, with relatively low concentrations of magnesium salts that should result from late-stage precipitation of salt deposits from sea water. Over the last 100 years, extensive studies of sea- water evaporites, in relation to brine density, have been a topic of discussion. The development of evaporation models has facilitated the increased production and purity of solar salt (salt produced through evaporation of brine by the sun's energy). Conversely, this information can be utilized to gain an understanding of how rock-salt formations were precipitated from sea water by analyzing the elemental constituents of the rock salt and of the resulting brine. By evaluation of well-documented, phase-curve tables of sea-water evaporation, a basic theory can be formulated on how the Flowerpot salt unit was formed.

Jan 1, 1999

By Richard M. Crowell, John W. Shield

GeoBiotics has developed a biooxidation technology (patents pending) which involves coating refractory precious metal sulfide concentrates onto a support material and biooxidizing the sulfides in a heap configuration. The concentrates are produced from low or high grade sulfidic refractory ores or existing mine tailings. The process has been found to achieve high gold recoveries asso­ciated with stirred tank biooxidation, but at the low operating and capital costs associated with whole ore heap biooxidation. Improved gold recoveries of up to 98% after biooxidation are reported for 4 representative mines or deposits. The sulfide flotation concentrates were studied using 3 and 6 in. diameter columns or 3 in. drained vats. The refractory sulfide concen­trates biooxidize rapidly in 3 to 12 weeks with substantial increases in subsequent gold recovery.

Jan 1, 1996

By W. P. Staunton, K. Jones

INTRODUCTION The increased activity in the Aus­tralian gold industry over the last decade has resulted in a concomitant increase in the use of sodium cyanide, with a projected consumption of 80,000 tonnes in 1991. Growing environmental awareness by government, industry and the public has generated increased interest in the fate of cyanide near gold mine tailings dams and has highlighted the lack of basic knowledge in the area, particularly for Australian conditions. In 1989 the Chemistry Centre (W.A,) commenced a' project, under the auspices of the Australian Mineral Industries Research Association entitled "Fate of cyanide in the Enviroment Near Mine Tailings" to investigate some of the issues arising from the management of tailings containing cyanide, The project, which has been supported by thirteen companies has three broad aims:

Jan 1, 1991

By Simon Hille, Rein Raudsepp

Since 1991, the Porgera Joint Venture has processed refractory sulphide flotation concentrate by pressure oxidation with subse­quent gold recovery from the washed residue, by a conventional leach/carbon-in-pulp (CIP) circuit. The capacity of the plant has been progressively increased in five stages of development. In December 1995, a third oxygen plant was commissioned, raising the total oxygen production to 750 t/d and thus allowing for an increase in the oxidation capacity of the four autoclaves. The daily sulphur oxidation rate in 1995 was 192 t/d with 99.5% oxidation, as compared to 293 t/d in 1996 with 99.0% oxidation. This paper details the performance of the pressure oxidation circuit through 1995 and 1996, and compares measured plant parameters with the original Sherritt (now Dynatec) process design criteria.

Jan 1, 1998

By J. J. Carlson

Studies were carried out to determine whether filtration rate changes observed in an iron ore concentrator were due to variations in particle shape. It was confirmed that ores mined from different locations differed in filtration rates by as much as 60%. However, when image analysis was used to quantify the shapes of the individual particles in the filtration feed, it was found that the particle shapes showed almost no variation, and the shapes did not correlate with the filtration rate. It was also determined that the filtration rate variations were not caused by changes in particle size distribution. These results suggest that the differences in filtration rate are due to factors other than size and shape, such as surface chemistry.

Jan 1, 2008

By William A. Kneller

A considerable range of composition exists in rocks that have been described as chert, jasper, or flint. Their composition may be opaline, chalcedonic, quartzose, or mixed. Certain cherts, when incorporated in concrete, are known to possess nondesirable thermal and chemical properties. The inability of chert to withstand thermal shock above the freezing temperature of water is an example of such a property. Cryothermal reactions may cause disintegration of concrete, due to repeated cycles of freeze and thaw. Thermal properties are significant because small temperature changes may cause inordinate expansion and resultant fissuring of concrete. Freezing of entrained water in chert may cause excessive physical failure in concrete. Some cherts react chemically with alkalies liberated during the hydration of the cement, with resultant cracking and deterioration. Sources of concrete aggregate in Ohio have been viewed with suspicion because they contain considerable chert derived from Middle Devonian and Pennsylvanian carbonate rocks. Light-colored porous cherts from the Middle-Devonian Colum- bus Limestone exhibit the least freeze-thaw durability of the samples studied. Denser cherts may also yield to freeze-thaw stresses, but tend to be more susceptible to thermal shock. Cherts rich in opaline and chalcedonic silica usually exhibit alkali-aggregate reactivity.

Jan 1, 1966

By David G. Rasmussen

With low commodity prices and continuing high operating costs, the mining industry must revise planning and operating to take advantage of every tool available. Conveyors operated within open pits are such a tool. Dravo engineers have designed conveyor systems into pits as prime movers in unique situations. Three cases are presented with economic comparisons made to conventional truck haulage. Increasing energy and labor costs tend to make conversion of prime haulage from trucks to conveyors. Long term pit planning and scheduling reduce the effects of conveyor inflexibility.

Jan 1, 1983

By Dennis K. Mortensen

Improvements in flotation technology are continually being made in the attempt to achieve the mineral processor's goal of maximum mineral concentrate grade and recovery at zero cost. Technology that cannot be totally proven in the laboratory must be tested under plant conditions either in a pilot plant or in the existing circuit. Problems associated with new technology can be solved effectively by the mineral processor who approaches each of the problems objectively.

Jan 1, 1989

By William M. Hartzler

The Powder River Basin (PRB) refers to the coal deposits located in southeastern Montana and the northeastern Wyoming counties of Campbell, Converse, Hot Springs and Sheridian (Wyoming PRB). In 1993, there were 20 active surface mines with 3109 employees in the Wyoming PRB (Annual Report, The State Inspector Of Mines Of Wyoming, 1993). Early PRB production growth was primarily in response to the passage of the Clean Air Act of 1970. The disproportionate growth in Wyoming as compared to Montana can be attributed to the differing coal taxation policies of the two states. The state severance and production taxes were significantly lower in Wyoming. However, Montana passed legislation in 1987 reducing the severance tax rate, substantially narrowing the severance tax gap. Campbell and Converse counties in Wyoming have benefited the most from the production growth in the region. Cyprus Amax's Belle Ayr Mine, south of Gillette, in Campbell County, was the first modern commercial coal mine to be developed.

Jan 1, 1994

By P. M. May, J. S. Solis, G. T. Hefter

Chemical speciation plays a critical role in many areas of gold processing. These include the formation of HCN in plant liquors, interference by copper in the extraction efficiency of gold, the recovery of adsorbed gold, and the behaviour of plant effluents in the environment. Thermodynamic modelling provides a cost-efficient method of rationalizing and even predicting of chemical behaviour. Unfortunately, because thermodynamic data for cyanide complexes are of poor quality and few are known under hydrometallurgical conditions. Such models are currently of limited use. This paper describes recent work on the thermodynamics of cyanide complexes of a range of metal ions. Data will be presented on the stabilities and enthal­pies (heats) and entropies of formation of a variety of metal ion species determined by potentiometry and calorimetry. Particular emphasis will be placed on the Cu(I)/CN- system.

Jan 1, 1995

By Muammer Kaya, Derya Oz

The main objective of this study was to remove printing ink from waste newspaper and improve the de-inked paper brightness as close as the unprinted paper by bleaching agents. This paper summarizes results of laboratory investigation into the de-inkability of newsprint printed with offset printing. Different chemicals and process parameters were varied to assess the effect on the brightness and cleanliness. The operations involved in de-inking process are briefly described and some of the problems being encountered are discussed.

Jan 1, 1995

By Ibrahim S. Balbaa, J. Terry Strack, James G. Hopkins

A microwave system for continuously reactivating carbon, used in gold processing, has been demonstrated at a gold mine in Ontario, Canada. The pilot unit produced reactivated carbon at a rate of 12 kg/h. Comparisons with the mine's existing reacti­vation kiln indicate that microwave reactivation technology has several clear advantages over conventional regeneration kilns. Upon completion of the original study, the microwave reacti­vation technology was further developed. An advanced rotary type microwave system that can be scaled up to reactivate car­bon at a rate of 120 kg/hr was designed and smaller pilot-scale equipment was commissioned and tested. Under an agreement with OHT, Harper International Corporation will manufacture, supply, and market the new technology. In addition to carbon reactivation, the rotary microwave system can be used in many other heating applications such as ore treatment, ceramic pro­cessing, and cleaning of minerals.

Jan 1, 1998

By Isobel Clark

The four papers in this session illustrate two different directions in which computer graphics seem to be developing. The first of these is in the handling and storage of geological information. The increasing use of micro-computers with limited storage facilities has seen a concomitant increase in the need to store geological data in as efficient a form as possible. It has also seen a recognition of the particular types of data which are used in a geological or mining analysis. Unlike many other fields, observations of drill cores, geological interpretations, structure and many other variables require storage in a readily accessible form. The authors of two papers in this session deal directly with Geological Information Systems. They discuss the setup, the specification of such systems, and the practical uses of the systems once in operation.

Jan 1, 1989

By A. Goulsbral, D. Harrison, R. Dunne

A programme to reduce cyanide consumption at the New Celebration Gold Mine, situated 32kms South of Kalgoorlie, Western Australia, commenced in the latter part of 1990. Cyanide speciation studies at the time identified that the major loss and consequently consumption was due to the hydrolysis of cyanide, The use of artesian hypersaline waters of high magne­sium content on gold plants in Western Australian Goldfields has meant that economically viable operating pH values during cyanide leaching are around 8.9 to 9.5. The high ionic strength in these waters does to some degree retard the hydrolysis reac­tion. Notwithstanding this, the formation of hydrogen cyanide and its loss due to volatilisation is the cause of the major loss of cyanide on most gold plants in the Kalgoorlie Goldfields. This paper discusses the aspect of oxygen addition during cyanide leaching to decrease cyanide consumption and increase gold recovery.

Jan 1, 1996

By R. L. Guerguerian

Critical fasteners are described as they apply to the specification, manufacture and assembly on large grinding mill bolted joints. The importance of adequate design methods, related joint diagrams and pivot analyses, with special emphasis on the quality of manufacturing and the tightening of procedures in the field, are discussed in an effort to ensure high availability plant operation.

Jan 1, 2003

Mining employment, gross output, local economic contributions and productivity are typical economic indicators. However, these economic indicators play a much bigger role in the overall capacity of the industry to be heard in decision-making on a national scale. Total mining employment in the USA has decreased significantly in the last 20 years. Gross output from most of the mining sectors has also declined, except in the case of construction aggregate. However, significant gains have been made in productivity. This paper explores these statistics and comments on their overall impact on academic institutions and political decision-making.

Jan 1, 2003

By B. Lin, C. Tang, Z. Chen

Earthquakes, underground impact pressures and rock bursts all produce acoustic emissions. The rate of these emissions can be used to describe rock instability. In this study, it was found that acoustic-emission rates obtained by simulating a twin sample (rock-rock) model could be used to indicate the acoustic-emission-rate characteristics during rock instability. A computer simulation and two case studies support this conclusion.

Jan 1, 1997

By G. G. O. O. Uwadiale

Starting from a crude ore assaying 45.6% Fe, a fine-grained oolitic iron ore was concentrated by the oil agglomeration technique to 90% Fe recovery and 65% Fe assay. The ore required grinding to minus 5 µm to effect adequate liberation, and the technique yielded optimum results at pH 9. The roles of pH, collector, and bridging liquid concentrations on selectivity and yield of iron minerals in the concentrates are discussed.

Jan 1, 1991

By Luis Tondo, Gary Johnson, Steve Morell

High pressure grinding rolls have been demonstrated by numerous researchers, and at a number of commercial installa­tions to be power efficient comminution devices. They have become almost "standard equipment" in the grinding of cement clinker. However, the technology has been relatively slow to catch on in the mineral processing industry. Part of this may be due to the fact that this relatively expensive machine has not been incorporated into the plant flowsheet so as to fully exploit its power efficiency, and therefore realise the maximum economic benefit. This paper describes the results of a pilot scale test program designed to evaluate the performance of the device with the aim of developing a circuit configuration that better exploits the inherent power efficiency of the machine. The results of the test program clearly show that power savings of about 50% over conventional technology are achievable when the machine is made to produce the final product grind size.

Jan 1, 1995

By T. G. Bobick

Task analyses were conducted by the Bureau of Mines at four underground low-seam coal mines to evaluate their supply-handling systems and for use in subsequent design of laboratory simulation experiments. Items were tracked (by videotaping) from delivery to the surface storage areas to their final destinations underground. Of particular interest were those tasks that required manual handling of supplies or equipment. Analysis of the videotapes revealed that the miners handled materials while stooped over a total of 37.8 pct of the time, 31.5 pct while on both knees and 9.5 pct while kneeling on one knee. These working postures impose considerable stress on the lumbar spine and may be implicated in the high number of back injuries in this work population. This paper also discusses various mechanical-assist devices developed by the Bureau and successfully evaluated in the underground workplace. These devices can be used to minimize the manual effort and the corresponding risk of injury associated with handling supplies and equipment components in low-seam coal mines.

Jan 1, 1988