Search Documents

By Khosrowshahi

A scientific approach to analysing grade control has been applied at a number of mining operations. By dividing the grade control process into the various stages of data collection and interpretation, errors can be identified using reconciliations of production against predictions. The merits of different mining styles in large and small open pit mines are examined.One factor in successful grade control is estimation of the expected ore loss and dilution. Empirical methods developed in two dimensions have been refined to enable 3D modelling of the effects on mineable grade and tonnage of varying the bench height, sampling orientation, and sampling Resolution.

Jan 1, 1992

An experimental study of the influence of surface active agents on the dewatering of fine coal was undertaken with a view to evaluating the usefulness of such materials in reducing the residual moisture contents of filter cakes. Experimental evidence is presented which suggests that while polymeric fiocculants have a beneficial effect on settling, they can have adverse effects on the filtration of the thickened underflow. Detergent addition, on the other hand, was shown to reduce filter cake moisture, and the magnitude of this effect was determined, in part, by the prevailing electrochemical equilibrium at the solid-solution interface.

Jan 1, 1976

By Cole NH

Substantial savings in terms of project time, cost, and financial viability can result through the expert involvement of independent financial advisors in the early stages of any mining project's preparation. This role is not confined to project financing, financial modelling, valuations and corporate finance advice, but may in the early stages be much more strategic in nature, covering a wide group of subject areas. A number of separate examples and case studies are outlined, which show the manner in which financial advisors can be effectively used. The benefits arising from involving an additional professional team with the project group must be offset against the separate and additional cost factors involved.

Jan 1, 1986

Commercial pelletizing commenced in 1955 to agglomerate very fine concen- trates which could not be fed directly to the blast furnace. Extensive develop- ment has taken place and is continuing. There are now three main heat hardening processes in use. Plants are operating, or under construction, throughout the world capable of producing in excess of 125 million tons per year of pellets from concentrates or direct mined orefines. The Whyalla Pellet Plant, which commenced production in May 1968, is examined in detail to illustrate the general principles of pelletizing. This plant converts high grade iron ore fines into high quality pellets at a rate in excess of 2 million tons per year.

Jan 1, 1971

By A D. Farmer

Power ultrasound may be used in a number of ways to enhance the processing of minerals. It is both technically and commercially feasible to apply ultrasound to leaching processes in order to enhance the removal of contaminating minerals, or the rate and ultimate recovery of valuable mineral. When applied to the production of synthetic rutile from reduced ilmenite produced by the Becher process, its use proved beneficial to both the aeration and the final acid leach process. The enhanced performance is achieved through the very localised high energy release at the mineral surface from the collapse of cavitation bubbles produced by power ultrasound. This gives rise to two effects: initially, the rapid cleaning of mineral surfaces û of oxidation products and coatings of fine adhering gangue minerals û and the attenuation of the boundary layer at the mineral surface during leaching, which allows fresh leachant to contact the surface more readily.

Jan 1, 2000

By Watsford RMS, Schache IS, Slaughter PJ

As part of the overall Copper Smelter expansion activities at Mount Isa Mines from 1970 - 1975, a decision was made to open circuit the converter slag from the Smelter and treat this product by flotation. This paper describes the technical aspects of plant operating and reagent practices employed, with particular emphasis on the large scale milling of this product and the effect through the use of reagent hydroxy ethyl cellulose on chalcocite grade and recovery.

Jan 1, 1978

By D R. van der Meulen, P Ande, D J. Lunt

Pressure hydrometallurgy is becoming an increasingly common unit operation in the treatment of gold and base metal ores and concentrates. The design of an adequate and appropriate pilot-scale testwork program is, therefore, essential in order to minimise the risks associated with developing a project in which autoclaves form a key part of the operation. This paper identifies the approaches that have been taken in the piloting of oxidative and pressure acid leach operations. Particular emphasis is placed on the determination of scale-up ratios between the pilot and commercial plants and the pilot-plant run durations. The issues, both metallurgical and project-specific, that can impact these key parameters are reviewed.

Jan 1, 2004

By Ghiani M, Satta F, Zucca A, Peretti R

After a brief introduction on the principles of contact electrification and a synthetic illustration of the Turbocharger separator, the successful results obtained with different raw materials are given and discussed, with particular reference to a North African run-of-mine with carbonate gangue, a crude ore from India containing pyrite and a mineral sample from Angola having quartzeous gangue. The pre-eminent effect of target surface temperature in the charging device of the separator is emphasised. On the basis of the results of both batch experiments and long-run tests the prospects of industrial application appear very interesting both from the technical and economic points of view, even when compared with froth flotation.

Jan 1, 1993

The environment under discussion is that of the sandy coastal plain and adjacent offshore sandy islands. The environment is the result of natural forces of the past which moulded it. Only very recently have men and machines participated in this moulding. The future of the environment - the changes which it must undergo - is in the hands of natural forces with, presumably, man's continued participation. In essence, we are concerned with the forces operating on a mass of sand.

Jan 1, 1971

By J Szymanski, S Planeta

In pursuit of optimising the cemented rockfill system fragmentation of the aggregate, while travelling through the surface-to-underground aggregate transport raise, was investigated and a æfines estimationÆ equation was determined. When used with the rockfill strength estimation equation, the fines estimation equation enables an accurate estimation of the compressive strength to be derived theoretically. Optimum fill raise orientation was examined and recommendations are given depending on the varying stope dimensions. If the maximum dimension of the stope is less than 30.5 m (100 ft), a single, centrally located fill raise will suffice. However, as the stope dimensions increase, the number and orientation of the fill raises becomes more complicated and each stope must be examined on an individual basis.

Jan 1, 1998

The word "mine" means different things to different people. To a professional in the mining industry, it may mean trucks and shovels, overburden dumps, headframes, mill buildings, and the other conventional nuts and bolts that constitute an operating mine. To an environmental- ist it may mean bulldozed trees and tailings dams. To a mining engineer who has spent a significant proportion of his career in mine and prospect evaluation, it can mean a hole in the ground with a liar at the top. The liar in this case is frequently not so through design but through ignorance. The purpose of this paper is to contribute in a small way to en- lightening that ignorance. In doing so, it will foster more effective deployment of the pool of risk capital available to the industry.

Jan 1, 1982

By Michot LJ, Kongolo M, De Donato PH

Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Hallimond tube flotation tests and microelectrophoresis measurements have been used to investigate the reactions involved in the adsorption-ion of K-amyl xanthate on finely ground pyrite. Pure pyrite was finely wet ground, at different pH values, in specially built laboratory stainless steel or iron rod mills. Amyl dixanthogen was the only product identified on the surface of pyrite when stainless steel rods were used. When iron rods were utilised, ferric xanthate and physically adsorbed xanthate ions were observed in the superficial phase. The use of iron media was found to depress slightly the floatability of the mineral.

Jan 1, 1993

By Roberts I. R

The movement of materials is normally associated with a number of problems, some more easily overcome than others. Orebodies are frequently located in remote areas to which transport lines have to be opened. In the case of Mount Isa Mines Limited, the geographical isolation from the major consumer areas necess- itates long lines of transport and communica- tion. The problems associated with transport of metals and minerals vary from time to time because of the changing industrial environment. The increased size of vessels, changes in handling methods, and the economic pressures brought on by increased costs of transport without any guarantee of aligned increase in metal prices all contribute to difficulties which have to be faced by the mining companies in their effort to reach the markets with their products.

Jan 1, 1974

By Riel RG

Nickel and cobalt mineralisation at the Murrin Murrin deposits, in the North Eastern Goldfields region of Western Australia, occurs within laterites developed on Archaean serpentinised peridotite units. Lateritic weathering of the peridotite has produced a resource of 116.8 Mt at 1.10 per cent Ni and 0.082 per cent Co (resource at May 1996 with a 0.8 per cent Ni cut-off; see Fazakerley and Monti, this volume). The mineralogy of the Murrin Murrin laterites was investigated to identify the minerals hosting significant Ni mineralisation. Laterite profiles were studied using X-ray Diffraction (XRD), impregnated polished thin sections, and Energy Dispersive Spectroscopy (EDS) Electron Microprobe analysis, of RC percussion drill chips. This paper summarises the results of these studies, and briefly discusses the nature of the minerals hosting Ni mineralisation.

Jan 1, 1996

By Ranford LC

Modern, research-based approaches to mineral exploration are essential to the future maintenance of the mineral industry. These need to fully utilise the rapidly expanding growth of understanding of the evolution of the earth's crust, and be properly integrated with advances in understanding of chemical and physical processes involved in ore formation. BMR has a major role to play in supporting the growth and utilisation of this research base, as well as maintaining the national geological and geophysical bases which are essential both to tactical and strategic interests of Australia and of its mineral industry. The objective development of data-process modelling is one target of such strategic research based on a more integrated approach to research by BMR, mineral companies, CSIRO and the universities with emphasis given to promoting positive feedback during research activities. Examples of the success of strategic research in Australia and overseas are noted in the Text.

Jan 1, 1986

By George CW

Western Mining Corporation (W.M.C.)operate a 30 000 tpa nickel refinery at Kwinana, W.A. using the Sherritt Gordon Process. Following ammonia/air leaching of sulphideminerals and subsequent copper removal, nickel metal is produced as powder by hydrogen red-uction of the ammonium sulphate-rich solution. Batchwise reduction in pressure autoclaves is preceded by an oxidation/hydrolysis step to ensure nickel powder quality.The reduction process is energy intensive, requiring high temperatures and pressures. Present energy requirement is 24 GJ per tonne of nickel reduced. Of this, 95% represents steam and hydrogen consumption and 5% electric power. The design and operation of the red-uction circuit is reviewed, outlining the main areas of steam and hydrogen usage.

Jan 1, 1985

By Jones

Extractive metallurgy in the mining industry in Western Australia has diversified and increased in the last 11 years. Before 1980, the industry mainly produced alumina, nickel, mineral sands and iron ore, with the gold industry restricted to five operating plants using Merrill-Crowe technology. In 1981 Carbon-in-pulp (C]P) plants were commissioned at Kambalda, Kalgoorlie and Meekatharra.Currently, the gold industry has some seventy CIP plants in operation, production of synthetic rutile has increased tenfold to 500 000 tpa, alumina production has doubled and production of copper, lead and zinc concentrates has begun. Other extractive metallurgy plants recover tin, niobium and tantalum, silicon, titanium dioxide and zirconia. Current proposals include vanadium, steel and rare earths.

Jan 1, 1992

The various functions of public relations are playing an increasingly important part in the activities of the many companies now engaged in oil exploration in Australia.Several of the larger exploration companies, notably West Australian Petroleum Pty.Limited, Ampol Exploration Limited, Caltex Oil (Australia) PtSr: Limited and Australian Oil and Gas Ltd. (and its American Associate Union-Kern), employ staff or consultant public relations specialists. In, most of the other companies now exploring in Australia, public relations are handled within the company, directed from the highest executive level.The object of public relations in.the oil industry is. to create in the public mind an impression favourable to the industry as a whole and'the company -or group of companies with which the public relations officer is associated.

Jan 1, 1962

The mineral resources of Hamersley Iron are structurally complex with fluctuations in mineral chemistry. Besides orebody charact- eristics, mineral recovery is also affected by stringent product quality demands from the competititve steel industry. Under such conditions, a geological ore reserve estimate has little meaning because it is unqualified and presupposes the defini- tion of ore. A system was developed in Hamersley - the Mine Planning Technique - to optimise recovery from available resources. This incremental planning method reduces a geological reserve statement into a simple, logical sequence of events. While there are limitations in the method used, the benefits are enormous. Among its' numerous applications, the schedule - the end product of the technique - plays an important role at Management level in decision making and policy formulation on all aspects of resource exploitation.

Jan 1, 1979

This paper provides an insight into the current status of risk management practices within our industry, based on an industry wide survey, with deliberate cross-reference to quantitative analysis. This survey showed that quantitative assessments appear to be mainly hampered only by the lack of reliable data and industry expertise to carry out such assessments. A short case study will illustrate some of the necessary basic tools and data types that would enable the industry to tap into an additional range of business improvement dimensions to more effectively manage the diverse and changing risk profile of the mining sector.

Jan 1, 2003