Search Documents

The paper discusses how automation is steadily proceeding throughout all areas of the electrolytic zinc industry. Fluid bed roasters with integral sulphuric acid plants are now on -computer control. Highly efficient, continuous leaching and purification stages, with feed-forward predictive and optimisation computer control, precede electrolytic cells with on-stream solution analysers and automatic stripping of deposited zinc. Controlled electric induction furnaces feed continuous casting lines, equipped with automatic stacking and strapping, machines, after computer based metal analysis has confirmed metal purity or alloy composition. The paper also discusses the use of computer models tied to process control systems, and the equipment and solution measurements that could be automated with advantage, using modern micro-based controllers and analysers.

Jan 1, 1985

By Huafu L, Ruishi N, Hongnian Y, Qinglong Z, Yangshen S

The Dongshan terrane was first recognized in 1984 (Guo,et al., 1984, 1989) as an old continental crust block of migmatized granitic gneiss in the Southeast Coastal Hercynian-Indosinian orogen, and it was thought to have occured on Dongshan Island, which has an area of less than 100 km? Recent research work has shed much light on the geology of the Dongshan terrane.The Dongshan terrane is approximately 40-50 km wide and 380 km long, trending NE. It runs from the region of the mouth of the Ming River through Putian and Huian Counties, Amoy and Dongshan island of Fujian Province to Nanao island of Guangdong Province, bordering the southern segment of the coastal region and coastal islands of Fujian and eastern tip of Guangdong Province. The Dongshan terrane is divided from the Zhejian-Fujian Mesozoic Volcanic Mountain Chains by the Changle-Shaoan fractural zone, and its eastern boundary is covered under water in the Taiwan Straits.

Jan 1, 1990

By Cole RT

The cultural ages of man have been defined in terms of smelting and hence as a prerequisite, mining for example the iron age and the bronze age. There could be no separation of the man from his role as the technologist (miner/ smelter) for his early metal working efforts were to enhance survival. In the millenniums since, the artisan specialist developed and the technologist emerged. The process is a sort of technical natural selection. From the generalist hunter, gatherer, miner, metalworker we advanced over the centuries with great 'steps for mankind' to the series of specialists each largely intent on securing his/her technical functions from the curious assaults of other tribal members. The relevance of all this to the theme, 'Past, present and future of the Victorian mining and metallurgical industries', is simply that people have always, and will always, be the moving force in our industries. It is the effectiveness of people now and in the future that this paper addresses.

Jan 1, 1982

The environment under discussion is that of the sandy coastal plain and adjacent offshore sandy islands. The environment is the result of natural forces of the past which moulded it. Only very recently have men and machines participated in this moulding. The future of the environment - the changes which it must undergo - is in the hands of natural forces with, presumably, man's continued participation. In essence, we are concerned with the forces operating on a mass of sand.

Jan 1, 1971

The concept of Extreme Gravity is the latest in a series of innovations that has seen a re-introduction of gravity recovery systems into the milling operations of most gold mines. Traditionally, most gold milling circuits are designed around flotation and cyanidation requirements, with the gravity circuit being fit in where possible. Extreme Gravity takes the novel approach of optimising the circuit, in order to maximise recovery by gravity. In some cases gravity systems can achieve high enough recoveries to eliminate the need for chemical systems such as cyanidation or flotation. There are many advantages of such a system including low capital cost, reduced permitting, improved cash flows and much reduced environmental issues. There are a number of plants currently in operation which utilise this new methodology. The Muzhievo project has been an example of a recent turn key success achieving recoveries from 85 - 90 per cent. The details of this project are examined as a case study.

Jan 1, 2000

Saxonvale mine is a multi bench open pit coal mine developed to its Stage I capacity of 1.75 Mt/y of run of mine coal. Detailed engineering studies for the mine commenced in April 1980, approval to proceed with the development was received in July 1980 and first coal shipments were made in April 1982. The engineering and project management of the mine development was carried out by BHP Engineering. This paper outlines the design and site administration for the development and describes both the organisation structure and the control and administration procedures used by BHP Engineering to ensure that the project was Successful.

Jan 1, 1983

The word "mine" means different things to different people. To a professional in the mining industry, it may mean trucks and shovels, overburden dumps, headframes, mill buildings, and the other conventional nuts and bolts that constitute an operating mine. To an environmental- ist it may mean bulldozed trees and tailings dams. To a mining engineer who has spent a significant proportion of his career in mine and prospect evaluation, it can mean a hole in the ground with a liar at the top. The liar in this case is frequently not so through design but through ignorance. The purpose of this paper is to contribute in a small way to en- lightening that ignorance. In doing so, it will foster more effective deployment of the pool of risk capital available to the industry.

Jan 1, 1982

By Michot LJ, Kongolo M, De Donato PH

Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Hallimond tube flotation tests and microelectrophoresis measurements have been used to investigate the reactions involved in the adsorption-ion of K-amyl xanthate on finely ground pyrite. Pure pyrite was finely wet ground, at different pH values, in specially built laboratory stainless steel or iron rod mills. Amyl dixanthogen was the only product identified on the surface of pyrite when stainless steel rods were used. When iron rods were utilised, ferric xanthate and physically adsorbed xanthate ions were observed in the superficial phase. The use of iron media was found to depress slightly the floatability of the mineral.

Jan 1, 1993

By Riley TW

This paper describes a Process Simulation Package for modelling the steady-state operation of a mineral processing plant. There are two levels of input allowed into the package. The first allows simple manipulation of the process models within a defined modular format which enables a wide range of process systems to be simulated. "The second level of input is via a Command file which allows plant models to be defined and changed without reference to the code or the requirement of any recompiling of the programme sources. The Command file interface was designed for use by metallurgists and assumes a sound knowledge of the system being modelled. As such it is an effective tool for metallurgists rather than a user friendly generalised package for the layman.

Jan 1, 1985

The safety in pillar extraction is closely allied to the design features of the pillar extraction system. Considering the conventional supported systems of pillar extraction there are problems associated with complying with the design system outlined. The accident causing agencies and the legislative action to overcome them are im- portant aspects. There is merit in the regularity of support and the limiting of the effects that human error can cause. But new problems and hazards are introduced by this powered support equipment. The comparison of accident experience is difficult due to lack of records and lack of uniformity of approach, but it is clear that powered supports provide a safer system. Every progress in research and practice provides further data to employ in accident prevention.

Jan 1, 1974

By M Brooks, M Nelson

A fundamental study was carried out on super pit sulphidic gold ore to establish the most influential flotation characteristics which were subsequently used in the development of an optimum flowsheet to achieve best economical recovery of gold. In developing the flowsheet, consideration was given to existing operational constraints in the treatment of the Super Pit ore. The fundamental study also included an innovative diagnostic investigation to establish the location and value of gold in the major mineral assembly of the super pit ore from a metallurgical rather than a mineralogical perspective. This study mapped a metallurgical fingerprint of the major types of super pit ore in relation to the location and association of gold.

Jan 1, 2000

By Hall ST, Miles NJ

Recently an inorganic salt, sodium polytungstate (SPT), has become available that allows the preparation of non-toxic solutions of relative densities up to 3.1. It is relatively expensive and at the higher relative densities achievable, highly viscous. Alternative inorganic compounds may in the future be identified that overcome these limitations. The Australian Mineral Industries Research Association Ltd (AMIRA) has initiated a project to examine possible alternatives. However, it has been found that by the addition of finely divided ferrosilicon to solutions of SPT, relative densities of up to 4.0 can be achieved. A laboratory technique for density fractionation of sized mineral samples utilising this finding has been developed. This is currently being extended to study the potential applications of such liquids and suspensions in dynamic systems for mineral, coal and recycled waste separations.

Jan 1, 1993

This paper refers to the open cut mining practice developed at Western Mining Corporation's Kalgoorlie Gold Operations (K.G.O.). Mining activity was centred attwo areas, namely W.M.C.'s Siberia "Sand King" and"Missouri" open cuts plus W.M.C.'s "Great Boulder" and K.M.A.'s "Horshoe" and "Morrison -Hannan's Star" open cuts in Fimiston.Kalgoorlie Gold Operations was set up initially to look after W.M.C.'s open cut interests in and about the Kalgoorlie area. The first mine commenced was, the Sand King open cut, approx 75 km NW of Kalgoorlie. it was here that the requirement for a highly selective form of mining first became apparent.

Jan 1, 1984

Exceptionally weak ground, usually associated with faulting, unanticipated groundwater pressures or flows and exceptionally high stress concentrations are some of the hazards which confront the underground excavation engineer. One or more of these hazards can seriously delay or even halt a tunnel or mining project, and methods for predicting these hazards are urgently required, particularly for projects involving high speed drill and blast or tunnelling machine excavations.This paper explores the current availability and the potential for the development of tools and techniques for the prediction of these hazards. It is concluded that systematic and automated geological data collection and interpretation represent the most promising avenue for development. It is suggested that there is room for the use of expert systems in which the computer is used to assemble and organize practical underground excavation experience into an interactive decision making system.

Jan 1, 1985

o Resource production is essential for society. o Demand for resources will increase as population grows.o Resource industries are the main consumer of trained geologists.o The lead time from(1) training to productivity(2) research to resource production is measured in years.o An adequate supply of well trained geologists and successful geological research is an important agent in ensuring cost effective, adequate supply of mineral resources for society. Therefore the main beneficiary of geological education is society itself.o Society is paradoxically apathetic or antagonistic to the resource industry because (1) it represents change(2) lobby groups working for other causes have successfully moulded a bogey man image for the resource industry in the public eye.Professional training and research for resource industries consequently lack popular support. Funding is at an absurdly low level in comparison with the economic importance of resource supply.

Jan 1, 1990

Computer modelling is being used to simulate rock fracture, caving and stress redistribution about longwall panels with increasing confidence. The models are being assessed against field monitoring and have significantly increased the understanding of caving mechanics within the overburden. This paper discusses the modelling approach and provides some examples of its application to overburden damage and induced hydraulic conductivity. Computer models used in this study simulate the fracture process in the geological units throughout the overburden. Analysis of the mining induced fracture patterns and in situ joint patterns allows an estimation of the hydraulic conductivity within the overburden. The cubic flow relationship has been used in the examples presented.

Jan 1, 2005

Hilton Mine is located 20 km north of the city of Mount Isa and Isa Mine in far north west Queensland. The sealed road used by the 500 employees to commute from the city is part of the Barkly Highway linking Mt Isa to the Northern Territory.Although discovered in 1947, major underground development did not start until late-1982 and first cut-and-fill production in mid-1987. The J53 exploration shaft was sunk in 1970-73 and the main P49 shaft in 1973-75. Since January 1990, most of Hilton ore production has been treated in the Hilton Concentrator, and concentrates trucked in slurry tankers to Isa for smelting or shipping.

Jan 1, 1993

By Riel RG

Nickel and cobalt mineralisation at the Murrin Murrin deposits, in the North Eastern Goldfields region of Western Australia, occurs within laterites developed on Archaean serpentinised peridotite units. Lateritic weathering of the peridotite has produced a resource of 116.8 Mt at 1.10 per cent Ni and 0.082 per cent Co (resource at May 1996 with a 0.8 per cent Ni cut-off; see Fazakerley and Monti, this volume). The mineralogy of the Murrin Murrin laterites was investigated to identify the minerals hosting significant Ni mineralisation. Laterite profiles were studied using X-ray Diffraction (XRD), impregnated polished thin sections, and Energy Dispersive Spectroscopy (EDS) Electron Microprobe analysis, of RC percussion drill chips. This paper summarises the results of these studies, and briefly discusses the nature of the minerals hosting Ni mineralisation.

Jan 1, 1996

By Wauchope AMH

Arsenic residues from BHAS Refinery operations are currently treated to form a calcium arsenic compound and stored in lined dams on site. Laboratory and large scale work on these residues has resulted in the development of a hydrometallurgical process for production of arsenic trioxide. The process also recovers the material from the storage dams. The residues are hot water leached to produce an alkaline arsenic liquor. This liquor is mixed with material from the storage dams and lime to form a calcium arsenic precipitate. The precipitate is then reacted with sulphuric acid to form gypsum for return to the main plant, and an acidic arsenical solution. Metallurgical gas containing 3-6% sulphur dioxide is bubbled through the solution and on cooling arsenic trioxide is precipitated. The product contains in excess of 95% arsenic trioxide. Installation of a plant at Port Pirie based on this process is being evaluated by BRAS.

Jan 1, 1984

By S Leary

Diamond drilling since early 2006 has identified an epithermal gold-silver (Au-Ag) deposit beneath 140 m to >400 m of cover. The Fruta del Norte discovery had an inferred resource estimate of 58.9 Mt grading 7.2 g/t Au in October 2007. The mineralisation is hosted by Mid-Late Jurassic andesite and andesite porphyry in a regional fault zone beneath mainly post-mineral but in part syn-mineral Late Jurassic cover. The intermediate sulfidation-style deposit formed before and in part during deposition of epiclastic cover in the fault related pull apart basin. In addition to its size and obvious economic importance, the widespread occurrences of visible gold and exquisitely preserved epithermal textures will make Fruta del Norte an important learning tool for explorationists seeking epithermal mineralisation in theAndes and elsewhere. An EXTENDED ABSTRACT is available for download. A full-length paper was not prepared for this presentation.

Jan 1, 2008