Search Documents

Although giant strides have been made in the Australian mineral industry over the past quarter of a century in terms of mineral discoveries, self-sufficiency of commodities, contributions to exports and other aspects, there are unhealthy signs emerging which require attention. For instance there are 20 out of 34 discoveries of base metals, uranium and nickel which for a number of reasons await development. Some of the reasons for the standstill in the mineral industry are partly economic, partly due to competing land use, uncertainty in applying or, recognising the principle of crown ownership of minerals, and to some extent lack of appreciation of two closely related exploration activities referred to as development exploration and assessment Exploration.

Jan 1, 1979

By Atkinson D

This paper briefly outlines the develop ment of the froth flotation plant at Coal Cliff Colliery. The plant was superimposed onto the original flow sheet in which fines were merely thickened and filtered. Test work leading up to the installation is described and the final layout is discussed. Details of the concentrate and tailings systems are given. Preliminary results of a further extension involving the use of a Davcra flotation machine are also given.

Jan 1, 1974

By Golledge P

Safety legislation has a long history and widespread application, but how can one test its effectiveness? One way is to examine safety statistics. Another way is to compare the legislation with principles of good safety practice. Mine safety legislation contains many features that are widely accepted, and these should be examined critically to determine their importance. Uniform legislation and revision of legislation should be considered. INTRODUCTION

Jan 1, 1975

By Channon W, Dube M, Makwana M, Kerfoot D. G

In early-1995, the Bindura Nickel Corporation commissioned a pressure leach plant at its Smelter and Refinery complex located in Bindura, Zimbabwe. The novel pressure leach process was developed by Sherritt to treat the nickel-copper sulphide residue produced from the original atmospheric leach circuit. The process extracts essentially all the nickel from the nickel-copper sulphide residue under non-oxidising acid pressure leach conditions, thereby producing an upgraded copper sulphide residue suitable for smelting and refining to electrolytic copper. The commissioning of the pressure leach plant was relatively smooth and design conditions were achieved within six weeks of operation. This paper presents a brief description of the process development and the plant design, followed by highlights of the plant start-up activities and summary of the plant performance.

Jan 1, 1996

After 15 years of operation Australian Mineral Foundation is at the cross-roads: Affected significantly in its last 21 years by Australian dollar devaluation, lower mineral industry activity and severe cut backs in the petroleum industry due to the low oil price, a re-evaluation of its goals and industry support is urgently needed. Industry support, strong at the start, has not kept pace with inflation and expectations of a totally self supporting organisation have proved impossible to sustain. Nevertheless, with a change in emphasis in education programmes, continued creative development of information services and more particularly greater awareness by industry of the services available and hence greater use of the services, industry support is expected to increase. Indeed, industry, it is believed, will accept its responsibility.

Jan 1, 1986

By Forssberg KSE

Purification of GAsgruvan Limestone is carried out by anionic, cationic and cationic followed by anionic flotations in order to obtain a calcite concentrate that is acceptable to the paper industry. The results indicate that such a concentrate could be achieved by first carrying out the separation of siliceous gangue minerals by cationic flotation followed by the separation of carbonate during the anionic flotation. Stearylamine acetate (Flotigam SA) and a modified fatty acid (OMC 357) are found to be selective during cationic and anionic flotation, respectively. A final product containing 99.25 per cent calcite with a recovery of around 80 per cent is obtained. It is hoped that these results could be further improved by the follow-up process variable studies, in particular, the effect of reagent dosages and conditioning time at each stage of cationic and anionic flotation steps.

Jan 1, 1993

By P Cameron

The Julius Kruttschnitt Mineral Research Centre (JKMRC) has recently commercialised a variety of new products for the mining industry through its commercial division (JKTech). Although the products cover a wide variety of niche applications, a common thread runs through the Research, Development and Commercialisation (RD and C) process: they have emerged from industry sponsored projects. The development history of JigScan (a control system for the mineral-processing jig) is a good example of how this RD and C process works in practice. It involves building mutually beneficial partnerships between the JKMRC and the mining industry through several incremental projects with one or more industry sponsors. All research projects have objectives to demonstrate but these projects also feature a degree of product development to actively encourage and support the longer-term vision for the mature commercial technology. The process to develop JigScan as a commercial product worked because each incremental project recovered costs, provided an immediate benefit for the sponsor and contributed to the longer-term development objectives of the JKMRC. Integrating development with research need not greatly increase the cost of research objectives generally provides a more robust research outcome for the sponsor and greatly reduces the overall development risk. Successful projects often feature industry mentors actively participating in the RD and C process. Additional funding from government appears to be easier to obtain when such close partnerships with industry are apparent. Finally, the business structure of the JKMRC within the University of Queensland ensures that commercial outcomes, developed within the contractual arrangements of the underlying RD and C projects, are used to benefit and support further RD and C with the mining industry. This paper tells the story of the development and commercialisation of JigScan, and draws conclusions about this kind of RD and C model.

Jan 1, 2000

By Heinrich CA, Wall VJ, Walshe JL

The Porgera Gold Mine, located in the highlands of Papua New Guinea, has produced over 5 million ounces of Au, since its opening in late 1990. The deposit is located within Upper Cretaceous Papuan Platform sediments approximately 25 km south of the Lagaip Fault, and is spatially and temporally associated with the 6 Ma alkaline Porgera Intrusive Complex.

Jan 1, 1995

By Sillet R, Corin P. J, Wilson G

Zinc Corporation of Broken Hi11 had some long hole stopes coming into use which could not be mined using diesel loaders, because of ventilation restrictions. In preference to use of pneumatic loaders, and because there were no field proven electric loaders in Australia, Horwood Bagshaw Ltd., were commissioned to repower a diesel loader with an electric motor, within the confines of the existing machine

Jan 1, 1977

The southern portion of the Swan Coastal Plain, a geomor-: phological element formed since late'Tertiary times, contains commercially exploitable accumulations of ilmenite, zircon, rutile'and monazite associated with a series'of raised'shorelines. The:location'of the deposits is controlled by a locally outcropping*Archaen-granite/granulite complex and a sea':current pattern'determined'by'local geography and a prevailing wind direction.'-A progression from medium. to high titanium ilmenite is'evident parallelled by. progressive leucoxenisation as the age of the deposits increases. Variation's in trace element content accompany this process. Circulating groundwater has caused vertical mineralogical variations within-individual deposits and' by p'ecipitation of iron has formed layers of hardpan. The economic sig- nificance''of the Geographe--Bay deposits is'briefly discussed,

Jan 1, 1964

All minerals contain radioactive elements, from the uranium ores of the Gabon, which contained sufficient uranium to initiate a natural nuclear reactor, to the very low levels of some recent evaporites. The commonly occurring heavy minerals such as ilmenite, rutile and zircon are no exception to this and contain varying qualities of radionuclides, depending on the source. With recent changes in legislation many natural minerals may become officially classed as radioactive. Such moves can inhibit the sales and exploration of many minerals in the heavy minerals suite. The many negative perceptions associated with the word radioactivity can produce an over cautious reaction from regulators and users. This paper presents a method of managing the radioactivity issues associated with minerals such that the safety aspects of workers and public are not compromised, whilst allowing the commercial use of such minerals to continue in a sensible manner. The paper focuses mainly on the mineral zircon and its uses. However the legislation changes particularly in Europe and the USA have the potential to affect all minerals imported into or produced in those countries. The model developed for addressing the issues of zircon radioactivity may be readily applied to other minerals since legislation governing such matters is not mineral specific. There is a strong need for education of both regulators and users of minerals. Regulators are usually not aware of the specific properties or uses of individual minerals. Similarly mineral users are not aware of the radioactive nature of their materials or how to manage this property. The paper concludes by recommending strong cooperative action by both producers and users of minerals to protect the future of their industry.

Jan 1, 2001

By D H. Bell

The potential for extracting gravel materials from active floodplain and channel areas has been investigated for three West Coast rivers û the Grey, Inangahua and Whataroa. Studies have focused primarily on resource availability and replenishment, but there are clearly also environmental management issues associated with such a proposal. The potential uses for of extracted materials include roading and concrete aggregates, as well as railway ballast, whilst a major benefit would be in assisting with flood control and channel maintenance in a naturally aggrading system. Sediment movement in the rivers has been examined at three scales; long-term (>100 years), medium-term (10 - 100 years) and short-term (<10 years). Long-term sediment movement is based on geological and geomorphological information, such as cyclic fan development and down-cutting in the Whataroa River where sediment input appears to be largely controlled by Alpine Fault rupture events. Medium-term assessment relied on air-photo interpretations over a period of about 50 years, with the mapping of channel changes and bank migration. Short term changes were evaluated from gauging records and other hydrological data, and took account of the development of an armour layer in these gravel-bed river systems. It was concluded that sediment in the lower reaches of each river was suitable for most aggregate uses, although input of more weathered Greenland Group materials in the upper reaches (eg of the Mawhera-iti or Little Grey) resulted in product that was not satisfactory for sealing chip or railway ballast. Of greater importance was the fact that short-term studies showed that a minimum threshold of flow was required for gravel entrainment, and that significant sediment movement only occurred above the one-year return period flood. Ongoing monitoring of river profiles, with accompanying flow gauging, would clearly be necessary were a substantial increase in river bed extraction to be permitted by The West Coast Regional Council.

Jan 1, 2003

The overall mineral assemblage of the Broken Hill orebody is similar to that of a skarn. However unlike the classical skarns it does not represent contact metamorphism of pre-existing limestone beds. It is a stratiform accumulation of exhalative-sedimentary silica, sulphides, (Ca, Fe, Mn) silicates and carbonates, fluoride and phosphate that has later undergone regional metamorphism. The resulting development of coarse-grained quartz, sphalerite, galena, rhodonite, bustamite, mixed carbonates, fluorite, apatite and many minor phases has produced a sulphide-rich skarn- like mass that like many others of its kind, might best be referred to as a stratiform skarn. Recent investigations of occurrences of this type are showing that the incidence of concentrations of particular metamorphic minerals in and adjacent to such orebodies are closely related to bedding and to former sedimentary facies patterns. From this it appears that the mineral assemblages may be used to deduce not only the nature of the materials laid down in the beds, but also the physico-chemical conditions under which sedimentation took place. Several stratiform deposits, including Broken Hill, are used as examples to show that variations in these conditions may have a profound influence on the subsequent response of the rock to regional metamorphism and hence on the mineral assemblages that finally develop.

Jan 1, 1983

Strong markets for metals and energy over the past five years have supported equity and debt market funding to enable a new group of mining juniors to emerge in control of economic resources, some in regions with high investment risk. As companies drive these projects to development, production and positive operating cash flow, their Boards and CEOs are confronting important questions:Having achieved initial success, what is our longer term purpose as a company? Does the purpose originally described in the Initial Public Offering to raise equity remain wholly relevant? Given that purpose, how do we understand the available sets of opportunities and related risks? Should we be acquiring new assets or other companies, or developing the existing portfolio? What commodity sectors and geographies should we focus on? Or should we be conserving funds until asset prices or project costs provide greater assurance of value to shareholders? How do we translate that purpose into tangible goals that shape and direct the work of people in the organisation? How do we get the right work done in the face of high turnover and competition for capable staff? Drawing on the authorÆs career experience and on work undertaken by Heuris Partners, this paper provides a practical CEO framework for strategy development, organisation design and on planning the work of the business in the mining industry.

Jan 1, 2006

The resistance of lead to chemical attack and the ease of its fabrication has made it one of the most useful of the metals available to the chemical engineer and the electrometallurgist. It has proved to be of particular value in the manufacture of sulphuric acid, and since the conversion of the sulphur of pyritic ores into sulphuric acid is becoming the duty of the metallurgist, the corrosion resistance of this metal will be a matter of considerable interest to him from the standpoints of both producer and user. He realises that there is little to be gained in carrying the process of purification past the ordinary economic limit if little or nothing is to be added to its corrosion resistance, and he as user would not be willing to pay a premium for such purification if it can be shown that its reputed value has no scientific foundation.The metallurgist is well acquainted with the trouble and expense of meeting demands which have nothing torecommend them but prejudice and fancy. The valuable anti-corrosive properties of lead are very commonly ascribed to its forming insoluble compounds with the acids sulphuric, hydrochloric, carbonic, etc. If we trusted superficial visual evidence alone, such a view would receive strong support, but in the light of what we know of the mechanism of corrosion we must attribute its resistance to other factors much less obvious to casual inspection. Certainly there may be some mechanical obstruction set up to diffusion of the liquids towards the surface of the metal.

Jan 1, 1932

By S Choy

Aquatic macroinvertebrates have been used as a monitoring tool for many years. They are ubiquitous and occupy a central role in the ecology of rivers. They are a key link in the aquatic food chain, forming a pathway between primary producers (such as algae and macrophytes) and predators (such as fish, platypus and birds), and some are sensitive to flow conditions, water quality and habitat condition. They are not very mobile and are good indicators of local impacts. As most aquatic macroinvertebrates are benthic, they are better able to integrate effects of changes in water quality, and habitat condition and structure. Their diversity is crucial to the maintenance of a balanced, functioning and healthy river ecosystem. Thus, data on benthic macroinvertebrate community structures can be used for predicting potential impact, assessing the extent of damage and for gauging recovery from damage. Over the past eight years, State agencies throughout Australia, through the National River Health Program have developed models (AusRivAS) to assess river health using macroinvertebrate communities. The Queensland Department of Natural Resources and Mines has sampled both macroinvertebrates and water quality throughout Queensland, including areas affected by mine discharges. This paper will assess results obtained from sampling in the Mt Morgan area to illustrate the usefulness of this method of river health assessment.

Jan 1, 2003

The paper discusses the characteristics of Be-zymianny activity during the last 2500 years. Three periods of increased activity have been identified which are the eruptive cycles lasting for 100-400 yrs. The periods of high activity fall on the fol-lowing time intervals: 2400-1700 yrs ago, 1350-1000 yrs ago and from 1955 ixp to the present time. The 1955-1956 catastrophic eruption after a long period of repose (about 900-1000 yrs) opened a new cycle of activity of the volcano which is continuing to-day. Several decades are distinguished in activity which differ in character and intensity of eruptions.

Jan 1, 1990

By Buizen M, Eagleton A. C

The results of calibration trials conducted on parachute stoppings both overseas and in Australia under a recently completed NERD&DC grant, are presented. Applications of parachute stoppings, for rapid regulation and control of ventilation networks are described including use in blasting areas and rescue work. Several parachute-type stoppings are described and their applications Investigated

Jan 1, 1988

By D Ryan

Following a long period of increase, there has been a reduction in exploration expenditure and activity in Australia over the past two years. During the post Second World War period, exploration was largely driven by mining companies seeking resources to satisfy an increase in world demand, while increasing their asset base as a result of mineral discoveries. In general, return on investment to shareholders was not the major driving force. With the exception of gold the mining industry has been faced with a long-term fall of metal prices in real terms. As a result the net profit return on average shareholderÆs funds in the Australian minerals industry has fallen from over 20 per cent in 1990 to less than five per cent today. Mining is now competing for funds with communication and finance based industries yielding high returns on shareholder investment. Shareholders and superannuation fund managers seeking a high return on short-term investments have indirectly reduced the funds available to the mining industry. Globalisation of the mining industry is leading to the rationalisation of the Australian mining industry as witnessed by mergers and acquisitions of local companies by foreign investors. The return on capital invested in the Australian mineral exploration industry must improve if the industry is to be competitive on a worldwide basis. Failure to achieve this will result in capital flowing overseas or to other industries. Relatively short-term upswings in metal prices which are generally driven by threats to the supply base (eg strikes, mine closures, increases in country risk) often lead to increased capital raisings for exploration funding. As a consequence of the time taken to raise the capital and increase exploration activity, measured exploration activity lags the metal price increases. There are also lags between commencement of exploration and discovery and ore production. In the case of gold exploration expenditure peaked six years after the price rise of 1980 Companies persevering with exploration in the current difficult period will be rewarded because they will be able to capitalise on future metal price rises and a minimised time lag.

Jan 1, 2000

Seven papers included in Session 8 of the Third International Mine Water Congress under the heading "Achievements in Mine Water Management & Research" have been reviewed. Only one paper, a case study by Masters on biological treatment of inorganically polluted effluent, has any connection with research in the sense of seeking new, generally applicable knowledge which would advance the frontiers of mine water management. The remainder deal with various aspects of the management of mine water ranging from investigation of the geology of a specific aquifer system through operating dewatering systems to the management of specific effluent disposal problems.

Jan 1, 1988